WIN $5,000 For Your Mustang! Enter Now
Talk to a Mustang Expert
1-888-332-7930
Mon-Sun 8:30 AM - 11:00 PM EST

Free Shipping On Orders Over $49. Details

Ford Tri-Bar Pony Fender Emblem - Right Side (05-09 V6)

Market Price $39.99 You Save 13% ($5.00)
Our Price

$34.99 (each)

FREE Shipping on orders over $49
  • Item 53305
  • MPN# 6R3Z-16228-A

In Stock Ships same business day. Choose options to add to cart

Features & Details

  • Tri-Bar Running Pony
  • Bright Chrome Finish
  • Genuine OEM Ford Part
  • Right Hand - Passenger Side
  • Sold Individually
  • Fits 2005-2009 V6 Mustangs
Classic Pony Styling. Complete the retro inspired styling of your S197 V6 Mustang with a Ford Motorcraft Tri-bar Running Pony Fender Emblem from AmericanMuscle.

Ford Motorcraft Quality. Add styling parts to your Mustang made by the people who know it best. This genuine Ford Motorcraft Tri-bar Pony fender emblem has been constructed to the original factory specifications from OEM quality materials for a perfect fit and a long durable life.

Application. This Genuine Ford Motorcraft Tri-Bar Running Pony Fender Emblem is specifically designed to fit the Right Side passenger side fender of the 2005 to 2009 V6 Mustang. Sold individually.

Fitment: 2005 2006 2007 2008 2009 Details

What's in the Box
  • (1) Emblem
Installation Info
Will it fit my Mustang?
  • V6 - 05, 06, 07, 08, 09

People Who Bought This Item Also Bought

Most Helpful Reviews

5/5
Pony emblems

these look awesome against our white car. easy to install.

Helpful (1)

5/5
Great Addition!

This emblem really pops on my 2016 white Mustang - highly recommend!

Helpful (1)

Overall Rating 4.5 out of 5 stars
Read All 23 Reviews

Customer Photos (18) Submit Your Photo

View All 18 Photos

You Might Also Like

3 Questions / 12 Answers

Ask a Question

Pony Emblems What are the Marker tabs on the back for. How would you install this emblem with them. I do not want to put holes in my fender. I am new at this.

Wildmarva

  • If you don't want to put holes in your fender, you can simple cut off the tabs on the back, sand them down flat and install the emblems using just the 3M adhesive! Hope this helps!

    LisaS

Show 4 more answers Helpful (1)

Is this emblem not usuable on my '04 V6 fender? It would look good as part of my modding up!

jakeroo

  • I Think it would look great. Make sure you clean the area on the fender. File or grind down the two pins on the backside, don't put holes in your fenders.

    armybrat91

Show 1 more answer Helpful (0)

Fender Emblems Do you offer any emblems that have 2 sided tape for instalation?

TomG1

  • The embalms come with the tape already on them. They have the tape and the installation connectors that fit in the holes. My car did bot have the holes and I did not want to drill any holes, so I took an Xacto knife and cut them off, then just used the tape to stick them on the car. They stick very well and they are easy to install.

    sbollenbacher

Show 4 more answers Helpful (0)

More Products You Might Like

Customer Reviews (23) Write a Review

Overall Rating 4.5

out of 5 stars

Installation Time:Less than 1 Hour

  • Fit 4.681818 4.7
  • Appearance 4.909091 4.9
  • Bang For Your Buck 4.409091 4.4



  • 5/5

    Installation Time: Less than 1 Hour

    March 02, 2017

    Pony emblems

    these look awesome against our white car. easy to install.

    blondie

    Year: 2008 Submodel: GT

    Helpful (1)

  • 4/5

    Installation Time: Less than 1 Hour

    January 27, 2017

    awesome add on

    just as pictured, added just the right amount of "nice" to my '07

    Sarge204

    Year: 2007 Submodel: V6

    Helpful (1)

  • 2/5

    September 20, 2016

    Just Right....

    After adding louvers to the windows, my silver Mustang needed just a bit of color. The fender emblem did just that. Pleased once more!

    Goalie1

    Year: 2008 Submodel: V6

    Helpful (1)

  • 5/5

    Installation Time: Less than 1 Hour

    June 01, 2016

    Great Addition!

    This emblem really pops on my 2016 white Mustang - highly recommend!

    Fantom

    Year: 2016 Submodel: Ecoboost

    Helpful (1)

  • 5/5

    Installation Time: Less than 1 Hour

    December 23, 2012

    Classic Touch

    These look Great on my wife's 2010 Convertible. She wanted that extra "Classic" touch , and these fit the bill perfectly. Easy to install. ( I trimmed off the 2 plastic tips off the back & just peeled & pressed in place, the tape is plenty strong enough to hold them on.) I would recommend these to anyone !!

    Wrangler04

    Year: 2010 Submodel: V6 Plano, TX, USA

    Helpful (1)

  • 4/5

    Installation Time: Less than 1 Hour

    December 22, 2012

    Good way to customize your ride

    The emblems went on in about 10 minutes and look great. I purchased two (one for each front quarter panel) and they really make my 2012 V6 look unique. I have yet to see another mustang with these cool running ponies on the side.

    Griggs

    Year: 2012 Submodel: V6 Boston MA

    Helpful (1)

  • 5/5

    Installation Time: Less than 1 Hour

    July 27, 2012

    Easy installation.....great apperance!

    This product added a personallized touch to my 2006 Mustang V-6 convertible. Installation was easy and the quality of the emblems is excellent.

    BigDee

    Year: 2006 Submodel: V6 California, USA

    Helpful (1)

  • 5/5

    Installation Time: Less than 1 Hour

    April 20, 2012

    Tri-Bar Pony Emblem

    I was pleased with my purchase. 3.5 in. down from fender crease and 3.5 in. in from straight edge of fender was the perfect spot. I really like the look it gave my v6 for such a small addition.

    Bronco

    Year: 2007 Submodel: V6 New Castle, PA, USA

    Helpful (1)

  • 5/5

    Installation Time: Afternoon

    February 19, 2012

    Tri-Bar Pony Fender Emblem for a GT

    I really like the way the Tri-Bar Pony Emblem looks on the fender of Mustangs and when I ended up with a GT vs. a V-6, I needed to make the change. Removing the GT badge was a little harder than I thought, but I took my time and didn't damage the fenders or the GT badges. I used an automotive adhesive and tar remover for new cars called Acrysol by Kent. It loosened the adhesive and took the stick out of it, but I still needed to gently rub with a small plastic scraper and soft cloth to get all the adhesive. I had seen other products suggestied, but I really was concerned about damaging the clear coat finish and I knew Acrysol was safe. I did apply some heat with a hair dryer and used 6# fishing line to cut the GT badges loose. Unfortunately, I still had a lot of adheasive to remove from the fender. The second badge came off easier because I modifed my techique after learning from the first one. Applying the new badge was simple and they look great. These badges are quite pricey, but I couldn't find a better deal then American Muscle!

    Rich51

    Year: 2008 Submodel: GT Florida

    Helpful (1)

  • 5/5

    Installation Time: Less than 1 Hour

    March 23, 2012

    Quality Ford OEM Tri-Bar Pony Emblems!

    Easy to install. Take your time. Follow my instructions: 1. Remove the two pins on the back of your emblems. You don't need them. The emblems are constructed of chrome covered plastic. The pins can be easily removed with small clippers, sprue cutter, Dremel, etc. 2. The proper placement of your emblem is 3.5" down from the crease of the fender to the top of the Tri-Bar of the emblem, and 3.5" from the verticle edge of your fender to the tip of the Pony's tail. 3. Use white transfer paper (on dark colored Mustang) or black transfer paper (on light colored Mustang) to mark the location of the emblem on the fender. Double check your measurements (as in step 2). 4. Be sure to clean your fender with Isopropyl Alcohol (90%) to ensure a good bond when applying the emblem. 5. Peel the backing to expose the tape and carefully place your emblem in the pre-marked area of your fender. 6. Apply pressure for at least 30 seconds to ensure a good bond. 7. Allow 24 hours for emblem to bond and cure. Resist the urge to drive your Mustang! 8. Sit back and admire your workmanship. You're done!

    Greg437

    Year: 2012 Submodel: V6 Alexandria, VA

    Helpful (3)

  • 2/5

    Installation Time: Full Day

    February 24, 2014

    Installation

    The 1st issue we had was having to remove the tags that were on it since the vehicle had no holes drilled in it. The 2nd issue the right emblem the tail was slightly bent out which made it difficult to get it to attach without breaking it. The 3rd issue was after all the cleaning & prep both sides the 2 way tape did not hold the emblems on the vehicle, they both fell off the car after about a half hour. We had to purchase some 3m tape to them & re install. My opinion overpriced & not worth it.

    gdwrnch

    Year: 2007 Submodel: V6 Florida, USA

    Helpful (1)

  • 5/5

    Installation Time: Less than 1 Hour

    July 05, 2013

    Tri Bar Mustang Emblems

    These are real nice high quality O.E.M. parts. They really add to the appearance of the car. Thanks again American Muscle.

    Dave08

    Year: 2008 Submodel: GT500 Connecticut

    Helpful (1)

  • 5/5

    Installation Time: Less than 1 Hour

    July 04, 2013

    Badges.....We don't need no stinking badges

    Several reasons that I absolutly love these badges. #1 Price...I did not have to look around and went through AM because of prior experience. The time envolved to get them here was "On Time". The Application/directions were excellent. Everything went without a problem In Close............American Muscle is the best

    JoeMustang2010

    Year: 2010 Submodel: V6 St. Louis, MO, USA

    Helpful (1)

  • 4/5

    Installation Time: Less than 1 Hour

    February 18, 2013

    No problem if you don't have the fender holes

    Great look and fitment. If you don't have the fenders with the holes pre drilled don't worry it's easy to take the clips off the emblem without damaging them even if you don't have a Dremel to get the back nice and smooth you can take them off carefully with some needle nose pliers

    ElJefe

    Year: 2006 Submodel: V6 Nashville, TN, USA

    Helpful (1)

  • 5/5

    Installation Time: Less than 1 Hour

    February 17, 2013

    Top Quality Piece! Expensive but worth it.

    I have all the bolt on 50 state legal equipment possible on my vehicle. I have debadged the GT except for the blue oval. After debadging the fenders, there are 2 holes left. Theses beautiful ponies cover them up and look great! At first glance, it looks like a six cylinder. I love the element of surprise!!!

    oldandsloegin56

    Year: 2003 Submodel: GT socal

    Helpful (1)

  • 4/5

    Installation Time: Afternoon

    February 16, 2013

    looks great

    The product is a great look for my 05 stang. But the install of it was a little channeling. No templet and I had to file down the two pins on the backside. Overall Looks Great

    armybrat91

    Year: 2005 Submodel: V6 Red Oak, TX, USA

    Helpful (1)

  • 5/5

    Installation Time: Less than 1 Hour

    September 14, 2015

    Great replacement

    Ive never liked the GT badges on my mustangs. Finally pulled the trigger and bought a set of these to replace the GT badges on my 2010 GT. excellent replacement

    silverskoundrel35

    Year: 2010 Submodel: GT Tx

    Helpful (0)

  • 5/5

    Installation Time: Less than 1 Hour

    May 31, 2013

    Genuine Ford part

    Quality part. Had to cut off the two tabs to mount in existing holes on front fender because my fenders never had any emblems. Did not want to drill two holes in each fender! the 3m tape is holding them on just fine and a good cleaning with alcohol.

    ScottS

    Year: 2008 Submodel: V6 Menomonee Falls, WI, USA

    Helpful (0)

  • 5/5

    Installation Time: Less than 1 Hour

    September 29, 2012

    Awesome and easy

    I added the tri-bar pony emblem to my Mustang V6. As it indicates, it comes with the connectors to be inserted into the predrilled holes as replacements. My V6 does not have the holes. As others indicated, you can just use a small Xacto knife and carefully cut them off. The emblems have sticky tape and you just pull the plastic cover off the tape and put them on the car. I did a little research to see where to install them. I also marked the spot on the car with a pencile lightly so I would be able to put them on exactly where I wanted them. Once you pull the tape off you need to get them on. Once you touch the tape to the metal, you can't come them. The tape is very strong. After about a week, I took the car through a car wash and the emblems stayed on. After about 4 weeks, the emblems are still on and look great. I have received several very positive comments. I would recommend them to anyone.

    sbollenbacher

    Year: 2005 Submodel: V6 Berne, Indiana

    Helpful (0)

  • 4/5

    Installation Time: Less than 1 Hour

    May 15, 2017

    Ford Tri-Bar Pony Fender Emblem

    Purchased both the left and right side emblems about 2 months ago and installed them about 2 weeks ago. I should note that I am not a mechanic or auto-body guy however the installation appeared easy enough so I decided to install them myself. They did not come with any instructions. For an amateur like myself instructions would have been helpful. None were included. Also not included were alcohol pads and the installation prep. Since my mustang did not have holes for the emblems, I had to cut off the 2 posts that were on the emblems. I did this with a utility knife but perhaps there is a faster and easier method. First I washed and dried the general area where the emblems were to be installed. I then wiped the area down with my own alcohol pads. I then carefully measured down from the panel crease and across from the wheel well, marking each location with a pencil. I then carefully removed the paper backing so as not to touch the adhesion strips with my fingers and applied the emblem to the panel. Finally, I pressed down all areas of the emblem with my fingers to make sure the adhesion strips had made full contact. The installation was easy and took about 10 minutes for each emblem. The most difficult part was removing the posts. I do not know how well the emblems will hold up long term; however for the time being they look good. I only gave 3 stars for the bang for your buck section, because of the missing instructions, alcohol pads, and adhesion prep pads. Also a more fair price for these items would be $19.99 for each, or $39.99 for the pair. I feel that they are over-priced for 2 relatively small pieces of chromed and painted plastic.

    BktListStang

    Year: 2005 Submodel: V6

    Helpful (0)

Related Mustang Categories