Mustang Smoked Light Covers ('05-'09) - Installation Instructions

This Mustang Parts Installation Guide Works For

Smoked Headlight Covers (05-09 GT, V6)DOWNLOAD PDF

Tools Required

Installation Time: 15 Mins

Installation

Headlight Covers Install:
  1. Push outer clip of light cover in between light and body of vehicle.
  2. Mustang Smoked Taillight Covers (05-09) 1

  3. Push upper clip of light cover over the top of light housing.
  4. Mustang Smoked Taillight Covers (05-09) 2

Tail Light Cover Install:

  1. Using the supplied alcohol prep pads, thoroughly clean surface where adhesive from light cover will mate with vehicle.
  2. Mustang Smoked Taillight Covers (05-09) 3

    Mustang Smoked Taillight Covers (05-09) 4

  3. Peel backing film from adhesive on rear of light cover.
  4. Mustang Smoked Taillight Covers (05-09) 5

  5. Push lower clip of light cover in between rear bumper cover and light on vehicle.
  6. Mustang Smoked Taillight Covers (05-09) 6

  7. Carefully align cover over light so that it covers entire lens.
  8. Mustang Smoked Taillight Covers (05-09) 7

  9. When cover is properly aligned and in its final position, push down on adhesive to ensure a tight fit.
  10. Mustang Smoked Taillight Covers (05-09) 8

Installation instructions provided by Manufacturer.