More Air for Powerful Engines.
If you have a built or supercharged 1986 - 1993 5.0L Mustang - or are planning on bigger cams, heads, or forced induction down the line - your stock 58mm or 60mm throttle body is going to choke your engine. Accufab's top of the line CNC machined 75mm billet aluminum throttle body and 2" EGR delete spacer kit is what you need to insure proper airflow and get the maximum performance from your upgrades.Exceptional Quality.
CNC machining of billet aluminum, combined with stainless steel shafts, insures that Accufab's product is a quality piece that will last and perform. Manufacturered with only the best components, this 75mm throttle body and spacer deliver unparalleled reliability and performance.Application.
The Accufab 75mm Throttle Body with EGR delete spacer is a direct bolt-in replacement for all 1986 to 1993 5.0 Mustangs. 75mm throttle bodies work great on heavily modified or supercharged 5.0 mustangs, this is because stock or mildly modified 5.0's do not flow air enough to benefit from the larger Throttle Body.
NOTE: A 75MM Throttle Body is suggested for a built or supercharged 5.0. If you have a stock or mildly modified 5.0, consider Accufab's 70mm kit with EGR spacer, as your Mustang will not benefit from the larger throttle body.
NOTE: Idle Speed should only be set by adjusting the Throttle Position Sensor. DO NOT adjust any screws on the Throttle Body. These screws are pre-set at Accufab.
NOTE: Though a tune is not required after installation, you may experience some minor irregularities at idle. AmericanMuscle recommends a tune after installing any throttle body in your 5.0.
1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993 Details >>