WIN $5,000 For Your Mustang! Enter Now
Talk to a Mustang Expert
1-888-332-7930
Mon-Thu 8:30a-11p, Fri-Sun 8:30a-9p

Free Shipping - Get it by Dec. 24th available on most items - Details

Cervini's 1995 Style Cobra R Hood - Unpainted (99-04 All)

Market Price $699.99 You Save 10% ($70.00)

$629.99

+ $99.00 Handling Fee with FREE Shipping
  • Item 72007
  • MPN# 153

Out of Stock Notify Me Choose options to add to cart

Features & Details

  • Classic Cobra R Styling
  • 3.5" Raised Center Cowl
  • Superior Lightweight Fiberglass Construction
  • Utilizes OEM Latch and Hinges
  • Unparalleled Cervini Quality and Fit
  • Fits 1999 to 2004 V6, GT, Bullitt and Cobra
Aggressive 1995 Cobra R Styling. The limited edition 1995 Cobra R achieved a once-in-a-generation appearance profile, because of its uniquely styled cowl hood. Now you can add that same classic styling to your very own 1999 to 2004 Newedge Mustang with a Cervini '95 Cobra R hood.

Raised center cowl for installation flexibility. The center cowl is raised 3.5" over the stock hood giving you added engine clearance and airflow when running applications such as aggressively large intake manifolds, superchargers, or carbureted motors. Screened rear air vents on the cowl provide impressive airflow while keeping debris out from under your hood.

Highest Quality Construction and Fit. Cervini hoods are made to the highest standards from extremely strong, lightweight fiberglass material and features a finished underside liner that can be painted for a show quality appearance. Cervini hoods utilize the original OEM hinges, latch, and hardware for a perfect OEM fit with little to no prep work needed for installation.

Application. This Cervini '95 Style Cobra R Hood utilizes the original OEM hinges and hood latch to bolt up in the stock location on any 1999 to 2004 V6, GT, Bullitt, or SVT Cobra Mustang for aggressive styling.

Note for 2003-2004 Cobra Owners. Have an 03-04 Cobra and still want to run this Cervini 1995 Style hood? No problem; you have these two easy options:
  1. You can pick up Cervini’s stalker style front bumper (part number 3355) or Cervini’s Cobra R style front bumper (part number 3362).
  2. Not looking to loose your factory front end? No problem. Your head light pedestals are located approximately 1” to close to the radiator for this Cervini hood to line up properly. Simply mark where the new hood and the pedestals should meet (approximately 1” farther away from radiator) you can drill new pedestal mounting holes in the header panel for a clean re-installation.

Freight Notes. Freight items can only be shipped within the continental 48 states, no expedited methods. What is freight shipping? Your Answers are Right Here!.

Technical Note: AmericanMuscle recommends professional installation of all body parts. We also recommended test fitting these products before they are painted.


Weight: 46 lbs (boxed). Dimensions: 57(L) x 57(W) x 9(H)

Fitment: 1999 2000 2001 2002 2003 2004 Details

What's in the Box
  • (1) Hood
Installation Info
Will it fit my Mustang?
  • Bullitt - 01
  • Mach 1 - 03, 04
  • V6 - 99, 00, 01, 02, 03, 04
  • Cobra - 99, 01, 03, 04
  • GT - 99, 00, 01, 02, 03, 04

Mach 1 Mustangs require removal of the shaker system

Most Helpful Reviews

5/5
Satisfied customer

Hood was shipped and arrived in excellant condition. Hood was supported on all four corners to reduce stress. My Dad and I was able to remove the stock hood off my 2001 Cobra and install the New 95 Cobra ...

Read More
Helpful (1)

5/5
Great looking hood

I have this hood on my yellow 99 Stang and it looks amazing, very sporty look. Only bad thing is if your short you migh have a little trouble seeing over the top part of the cowl

Helpful (6)

Overall Rating 4.9 out of 5 stars
Read All 17 Reviews

Customer Photos (46) Submit Your Photo

View All 46 Photos

You Might Also Like

6 Questions / 10 Answers

Ask a Question

Squirter nozzles what will i do with the windshield washer squirters? the CDC relocation kit only works on the 05-09 models

Mike10GT

  • The washer sprayers are not on the hood for the 99-04 body style, so you won't have a problem.

    Karston

    Good Answer (2) (0)

Show 1 more answer Answer This Question I need this answered (0) (0)

Will this hood hit the windshield when it's opened?

SlvrGT

  • No it wont opens with plenty of clearance

    jallen58

    Good Answer (0) (0)

Show 3 more answers Question Resolved

can you put a hood scoop on it as well.

orgstang

  • why would you put a hood scoop in this hood? you could if you do your own, but it wouldn't look right probably.

    lino03

    Good Answer (1) (0)

Answer This Question I need this answered (0) (0)

will this hood work with shaker? just wondering if the hood would be too tall to use with a shaker ram air set up after I cut the hole in the hood? just want to make sure my shaker will not be buried by the hood lol

USMC0311xxx

  • no, it is about 3 inches taller than stock

    cs9245

    Good Answer (0) (0)

Answer This Question I need this answered (0) (0)

What's the box measurement?

Rockford

  • The measurements of the Cervini's 1995 Style Cobra R Hood - Unpainted (99-04 All) box will be 46lbs boxed and the dimensions will be 57(L) x 57(W) x 9(H).

    KevinD92

    Good Answer (0) (0)

Question Resolved

will aftermarket (redline tuning) hood struts work with this hood?

jake

  • The Redline Tuning Hood Struts will work with this Hood. You may need to drill into the Hood in order to install the brackets because this Hood does not have the existing holes.

    AshleyK

    Good Answer (0) (0)

Question Resolved

More Products You Might Like

Customer Reviews (17) Write a Review

Overall Rating 4.9

out of 5 stars

Installation Time:Full Day

Installation Cost:$250-$500

  • Fit 4.666667 4.7
  • Appearance 4.75 4.8
  • Bang For Your Buck 4.666667 4.7



  • 5/5

    Installation Time: Less than 1 Hour

    December 16, 2012

    Satisfied customer

    Hood was shipped and arrived in excellant condition. Hood was supported on all four corners to reduce stress. My Dad and I was able to remove the stock hood off my 2001 Cobra and install the New 95 Cobra R hood in about 30 minutes. It took approximately 15 mins to align the hood on my Cobra. We tweaked the hinges and moved the fender bolts slightly to accomplish great alignment with minimal effort. Overall I am very satisfied with this hood. Very good high quality hood, love the fact that it is finished underneath unlike other hoods.

    Nick01

    Year: 2001 Submodel: Cobra Dobson, NC 27017, USA

    Helpful (1) (0)

  • 5/5

    June 27, 2010

    Great looking hood

    I have this hood on my yellow 99 Stang and it looks amazing, very sporty look. Only bad thing is if your short you migh have a little trouble seeing over the top part of the cowl

    Charles

    Year: 1999

    Helpful (6) (0)

  • 5/5

    August 06, 2010

    1995 cobra style hood

    Hood fit onto my 02 without any problem other then the hood was about 2 cm lower then the fender on the passenger side I took it to a local body shop for paint and they were able to raise the hood to match it was really what my v6 needed to stand out

    joe

    Year: 2002

    Helpful (5) (0)

  • 5/5

    Installation Time: Shop Install

    December 23, 2011

    good hood.

    The body shop had to do very little prep work and it turned out great. Shipping was fast and the hood arrived in flawless condition. It was packed well and even came on little stands to protect the corners. It is slightly thicker than the original so keep that in mind but it is not noticeable once installed. It also weighs significantly less. It has just the right amount of cowl, not over the top, just perfect. Definitely changes the look of your new edge. Get rid of that fake hood scoop and get this functional piece today.

    whitepony04

    Year: 2004 Submodel: GT ok

    Helpful (5) (1)

  • 5/5

    March 20, 2009

    Sweet

    The hood was perfect it looks incredible on my 03 GT

    Ronald Peagler

    Year: 2003 Submodel: GT

    Helpful (4) (1)

  • 5/5

    Installation Time: Afternoon

    March 28, 2012

    Best hood for a 99-04 mustang by far

    This cowl hood makes my car look 10000X meaner. I was honestly surprised at how good it looks. Now everyone turns thier head everywhere i go. Its a real head turner. You can never go wrong with american muscle!!

    Lamar1990

    Year: 2000 Submodel: GT Keizer, OR

    Helpful (2) (0)

  • 5/5

    Installation Time: Less than 1 Hour

    February 25, 2012

    Awesome hood

    Fits great, looks great, best fitting fiberglass hood i have ever had.

    scott

    Year: 2003 Submodel: GT louisville ky

    Helpful (2) (0)

  • 5/5

    August 24, 2008

    Cervini 95 Cobra R Hood

    The hood fit perfectly. No blemishes. Easy to paint.

    Tom Miller

    Helpful (2) (0)

  • 5/5

    Installation Time: Less than 1 Hour

    July 13, 2012

    Sexy hood went on like how the old one came off

    Ive got an 02 gt that caught fire and im rebuilding it better than before so I got this hood it came sooner than I expected nice fit, look, and easy to put

    hexxx

    Year: 2002 Submodel: GT Los angeles

    Helpful (1) (0)

  • 5/5

    Installation Time: Weekend

    July 13, 2012

    95 Style Cobra R Hood.

    Excellent fit and finish, looks killer. Only thing I had a problem with is sometime during shipping the hood got warped a bit, but nothing a little heat on some blocks before paint didn't fix. Would recommend it over the stock hood 100x!

    TrueBlue01GT

    Year: 2001 Submodel: GT Gate City, VA

    Helpful (1) (0)

  • 5/5

    December 06, 2007

    Cervini Cowl Hood

    This hood fits great. Many aftermarket kits fit horrible not this one. With some hood latch modifying and moving the hinges a bit the hood lines up perfectly.

    Mark

    Helpful (2) (1)

  • 4/5

    Installation Time: Less than 1 Hour

    July 09, 2014

    Nice fitting hood

    I own a body shop and have put on lots of fiberglass hoods on, over a 25 year span for mainly customers The quality of this hood is the best I've seen. It also fits terrific with very little adjusting. I haven't painted it yet,but I see no issues with the gel coat. Hopefully we can have paint on it in the next week.

    Vanthebodyman

    Year: 1999 Submodel: Bullitt Middleburg, PA 17842, USA

    Helpful (0) (0)

  • 5/5

    Installation Time: Shop Install

    Installation Cost: $250-$500

    May 01, 2014

    Great Fit, shop said ez to work with

    This was a great looking hood that the shop said was easy to prep, paint and toss on the car. It went really smooth and looks great!

    DaveK

    Year: 2000 Submodel: GT Malvern, PA

    Helpful (0) (0)

  • 5/5

    Installation Time: Less than 1 Hour

    May 28, 2013

    Killer look for your new edge Stang

    I've been looking at this hood for 2 years and finally decided to take the plunge. The fit was good, just had some minor mods to make to the hood hinges and latch for alignment purposes other than that went right on. My body man said this was the best aftermarket hood he has worked with, prep work was minimal. Totally changed the look of my car, beats looking at the fake hood scoop, should've gotten it sooner...love it

    Ponyboy42

    Year: 2004 Submodel: GT Cleveland, OH

    Helpful (0) (0)

  • 5/5

    Installation Time: Shop Install

    May 07, 2013

    Love how it looks

    This hood made my 00 gt look badass. Way better than the original hood i tell you that

    Angelc650

    Year: 2000 Submodel: GT South San Francisco, CA 94080, USA

    Helpful (0) (0)

  • 5/5

    Installation Time: Shop Install

    Installation Cost: $250-$500

    August 08, 2012

    Awesome Hood!!

    I just had thia hood painted and installed by my mechanic. It looks AWESOME! It really gives my Roush 360R Mustang a much nastier look. AWESOME!

    roushman7

    Year: 2002 Submodel: Other Hollywood, FL, USA

    Helpful (0) (0)

  • 5/5

    Installation Time: Afternoon

    July 19, 2012

    Body shop guy said that it was the straightest fiberglass hood that he had ever worked on and that includes OEM

    It was packaging was great and the shipping time was fast. When I opened the box I was impressed by how straight the hood was. I have purchased hoods from Harwood and they never looked this good. The bottom side of the hood also has full gelcoat so finishing the bottom side looks as good as the show side. All and all worth the money in prep time and the finished product. The height of it is just right for what I was looking for. When sitting in the seat it is just barely over the top of the winshield wipers. To top it all off my wife even likes the way this hood looks on my car. Nice Job !!

    laserman

    Year: 2001 Submodel: GT Grand Rapids, MI, USA

    Helpful (0) (0)

Related Mustang Categories