- (4) Valve Stem Sensors
- (1) Transmitter Tool
- Hardware included:
- None Required
Important Tire Rotation Note. When rotating tires that are equipped with TPMS sensors it is important to reuse the TPMS Transmitter Tool to recalibrate the sensors. By rotating your tires you are changing the physical location of the sensors and your cars computer will need to update to be aware of this location change. Failure to do so will result in inaccurate and incorrect low tire pressure monitoring.
Fitment: 2007 2008 2009 Details
Installation Time: (approx) 1 Hour
Difficulty Level:Light to Moderate mechanical skill required.
I have a Shelby GT500 2008 that has sensors mounted on steel bands attached to the hub of the rims. Do your sensors totally replace those and they need to be removed. Also will the wheels need rebalancing after replacement with your sensors?
Are the stems metal clamp in or rubber snap in style? The picture is of the rubber but the video is metal.
I have an 08,10, 13 mustang and change tires sets between cars is there tps sensors that will work on all the cars?
May 27, 2010
Factory Product - Low Price
Was suprised to see that the sensors and the remote are factory Ford products. You can save a few hundred dollars by getting them through American Muscle than you would by getting them through the dealer. Thanks AM, you guys rock!
March 10, 2010
This kit works perfectly. It is by far the way to go. I only needed one sensor because I had one that went bad but the cost for just one sensor is $90 so for the extra $60, I now have 3 more spares and all of the mounting hardware.
May 30, 2010
This product was easy to install and very simple to program. Thanks for making something the consumer can use without the dealer having to be involved.
May 19, 2012
Like factory, if not better. Too easy. Must have if your car is 07 and newer
December 06, 2011
Fixed my TPMS fault light problem.
My factory TPMS was not working giving false alarms from time to time. This new set fixed the problem and the valve stem version seems to be better than the banded versions of TPMS. Great products, great prices, great customer service.Great experience as always. Thank you very much.
April 19, 2011
As far as the TPMS kit, it's pretty simple to install these things. The only issue i really had was the band didn't fit through the original bracket. luckily it came with 4 alternate brackets, so i took the sensors off and placed them in those, and the bands fit easily. You also save a good chunk of money by ordering through AM, rather than Ford.
October 08, 2009
TPMS FULL mount
This was the best way to correct my TPMS error message, when I installed new rims.
April 19, 2009
Great Product !!
Heck of a deal !! Bought this for a 08 GT/CS with 18\" wheels. Installed the bands and sensors myself. (that easy) Sensors linked up with the car perfectly ! WAY cheaper then buying from the dealer........
March 30, 2011
Did the job perfectly. Local tire shop had no problem putting them on, could have done it myself if I had a tire machine.
May 04, 2012
Worked but a hitch
Well this worked well for my 2008 I added 20" wheels 35 series in the front and 30 series on the rear The front synced up every time. I had trouble with the rears. they would fial every time no horn honk Finally we pointed the learning tool at the tire just below the valve stem on the rear tires and walla they synced.