- (1) Wheel
- (1) Center Cap
- Hardware included:
- None Required
Add TPMS Sensor Kit (recommended for 07+)
Add TPMS Tool (required to sync sensor kit)
Note: Priced per wheel.
Note: Anthracite does not match the stock Anthracite color.
Fitment: 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 Details
Won't fit? Add an exception
Free Mounting & Balancing: Professional mounting & balancing is available on all wheels and tires when purchased together on the same order, so you can just swap your wheels in your driveway when they arrive. We even offer Free Nitrogen tire fill (see option above).
What is TPMS? The Tire pressure Monitoring System is a safety feature on all 2007+ Ford Mustangs that alerts you when your tire pressure drops to an unsafe limit.
How do I keep my TPMS feature? Aftermarket wheels don't have TPMS sensors. If you select 'Add TPMS Sensor Kit' and 'Add TPMS Tool' at the top of the page when you order your wheels, then chose Free Mounting & Balancing when you add tires, we'll install the sensors for free!
Difficulty Level:Simple installation for anyone
|Placement:||Front or Rear||Centercap Size:||Large (2-1/2")|
|Back Spacing:||5.72" (145mm)||Offset:||+30mm (1.18")|
|Bolt Pattern:||5x4.5" (5x114.3mm)||Weight:|
|Material:||Aluminum||Lip Size :||N/A|
|Best Tire :||235/55-17||Year/Model:||2005-2010 GT & 2005-2014 V6|
Does not fit 2011-2014 GT, BOSS 302, Shelby GT500, or Mustangs with an upgraded a Big Brake Kit
My 2000 stang GT is stock suspension, and I had bought the 9's for the front and used the Kumo 245's that I had already. I lost normal steering control that I had with the OEM 8's. Also developed a tire ... rub when full turn to the right. Not happy but not all mad, I could still deal with it. Anyway I hit a 3" drop pothole and bent the left front rim. That was not a good moment. Only rolling about 40mph. So I ordered the 8's and steering is returned to normal. I like the look of both. But I definitely prefer the drive with the 8's up front. I have 10.5's on the rear. Cool set all around.
Can I use OEM tires with these rims,and will they require centering rings? I intend to use OEM tires to keep cost down, thinking I should go with 17x 8" as opposed to17x9" ? Secondly I've encounterd issues with oscillations on other aftermarket rims on other vehicles whereas I needed to have centering rings in addition, should I expect these with the rims? Is this rim paintable, by the way I have a base coupe 3.7 V-6.
Yes. You can use the factory tires if you get the 8" wheel as long as your factory tires are 17's. The Hub Centric Rings are not required for these wheels. These wheels are paintable with the right prep. Maybe do a youtube or forum search on how to properly paint them.
Can factory pressure sensors be transferred to these wheels? In other words, can the pressure sensors that are already on my factory wheels be used on these wheels?
Yes your factory pressure sensor can be transferred to these wheels
Hi, i have a 2010 V6 Mustang with stock rims and 215/60/17 tires. Will these tires fit this 8" rim? Thanks Rick
Installation Time:Less than 1 Hour
June 04, 2010
17x8 vs. 17x9 for the front
My 2000 stang GT is stock suspension, and I had bought the 9's for the front and used the Kumo 245's that I had already. I lost normal steering control that I had with the OEM 8's. Also developed a tire rub when full turn to the right. Not happy but not all mad, I could still deal with it. Anyway I hit a 3" drop pothole and bent the left front rim. That was not a good moment. Only rolling about 40mph. So I ordered the 8's and steering is returned to normal. I like the look of both. But I definitely prefer the drive with the 8's up front. I have 10.5's on the rear. Cool set all around.
Installation Time: Afternoon
June 01, 2014
I put these on my 06 GT along with a new set of tires. They look great! I receive tons of compliments on how they match the car so well. Definitely recommend!
Bang for your Buck 5
Installation Time: Less than 1 Hour
March 27, 2014
The wheels and tires look great and ride smooth,
I only have one compliant, about the balance of the wheels! two of the wheels had double stacked outside weights, that when the wheels were installed hit the front calipers! I had to remove them and rebalance the wheels with low profile weights! I was under the impression that you were Mustang experts! I am a ASE master technician working in an import shop, and I never double stack tape on wheel weights. I was very disappointed when I saw this. I hope that your customers that do not have access to a tire balancer do not get this type of balance!
Bang for your Buck 5
June 22, 2011
Arrived very quickly - cross-border, no hidden charges or fees, etc. Look great - slight differences from factory, but not unwelcome changes - slightly deeper set, wider polished flange, etc. Balancing has been challenging with sensors, though - factory wheels haven't been nearly so tough to get and hold a balance with (I've remounted tires onto them three times).
May 12, 2011
Got these for Xmas, and let me tell you that they are the best. I was in awe when I put them on my car. It totaly changed the look, and feel of the car. Get these if your on the fence about them. You won't be disapointed. A++
November 03, 2007
I bought these for my 98 Gt, and they look amazing!
March 16, 2008
I bought these for my 02 V6 and they look amazing and the shipping was very fast the wheels were at my house within less then a week.
October 08, 2007
Bought these for my 96 Mustang and they look awesome. In the sun, they actually have a shine to them which look like chrome. I would recommend these rims to anyone. Definitely worth the great price!
June 12, 2010
I've got a 2000 conv't that I "rescued". The wheel and tire combo is unbeatable! I think the lighter color accents my dark blue car more than a darker set of ford originals. The Ford pony center cap (1R3Z-1130-AA) will fit perfectly if you decide to add these.
January 23, 2008
They look sick on my 01 GT. Great price!