Win Free Mods & Tuning Enter Now
1-888-332-7930 M-F 9-9,Sat 9-5:30,Sun 12-4 ET

Free Shipping on Everything. Seriously. Details

Ford Racing BOSS 302 Intake Manifold Install Kit (11-14 GT)

11 Reviews
Our Price

$195.00

  • Item #50316
  • MPN# M-9444-M50B

  • Market Price $233.99
  • You Save 17% ($38.99)
In Stock Ships same business day.
Free Shipping on Everything
Customer Photos
Features
  • Required for installation of Boss 302 intake manifold w/ stock air box
  • Genuine Ford Racing parts
  • Complete kit
  • Fits 2011-2014 GT with Boss 302 intake manifold
Description
Required For Installation With Stock Airbox. When installing the Ford Racing BOSS 302 Intake Manifold on your Coyote powered GT, you also need the appropriate accessories for proper fitment if installing in conjunction with your stock air box. This Intake Manifold Installation Kit is for use with a Ford Racing Boss 302 intake manifold.

Kit Includes. The Ford Racing BOSS 302 Intake Manifold Installation Kit comes complete with fuel vapor hose, bracket, screw, fuel supply assembly and air inlet tube.

Legendary Ford Racing Performance. When you're adding parts to your pony, trust the folks who know it best to untap hidden potential and unleash the monster under your hood.

Application. This Ford Racing Manifold Kit is required for installation of the Ford Racing BOSS 302 Intake Manifold on a 2011-2014 GT with the 5.0L Coyote Ti-VCT modular engine when combined with the stock air box.

Mustang Fitment: 2011 2012 2013 2014 Details

What's in the Box
Hardware included:
  • (1) Fuel vapor Hose
  • (1) Bracket
  • (1) Screw
  • (1) Fuel supply assembly
  • (1) Air inlet tube
Installation Info
Fitment
  • Boss 302 - 12, 13
  • GT - 11, 12, 13, 14

Most Helpful Reviews View All

Overall Rating 4.5/5 Write a Review
3/5
Great, but missing one piece

The boss intake is a great piece. It adds a lot of high rpm horsepower with the correct tune. The install kit leaves a bit to be desired. This kit is missing the electrical connection for the purge valve.

Read More
Helpful (4) (0)

5/5
boss 302 manifold install kit

First off if you are planning on installing the boss manifold I highly recommend ordering this kit with the manifold otherwise you will be dealing with a check engine light and a "check fuel inlet" message.

Read More
Helpful (2) (0)

Customer Photos (8) View All

You Might Also Like

Q & A (3 Questions, 2 Answers) Ask a Question

Do I need this kit when installing the BOSS 302 intake manifold with a Steeda Cold Air Intake on a 2011 GT?

SR68790 Year: 2011 Model: GT

Good Question (0) (1)
  • No this kit is required for installation of Boss 302 intake manifold w/ Stock Air Box.

    Helpful (1) (2)

    fasteddie64 Year: 2007 Model: V6

    Top 1 Contributor

Answer This Question

Splicing Is there a version of this kit that comes with everything you need so that you don't have to splice? I see that folks are saying you need to splice existing wires, which I'm not sure I'm comfortable doing.

JonDavid Year: 2013 Model: GT

Good Question (0) (0)
  • No, you will have to splice the wires. It is pretty simple job though, just make sure you solder the connections.

    Helpful (0) (1)

    GrumpyBill Year: 2013 Model: GT

Answer This Question

do i need this kit for installation on my 2013 CS/GT with an Airaid CAI?

Pawlak Year: 2013 Model: GT

Be the First to Answer This Question
Good Question (1) (1)

Reviews (11) Write a Review

  • 5 Stars .73 73%
  • 4 Stars 0 0%
  • 3 Stars .27 27%
  • 2 Stars 0 0%
  • 1 Stars 0 0%
4.5

out of 5 stars

11 Customers Recommend this Product

Installation Time:Less than 1 Hour

  • Performance Gain: 4.4 4.4/5
  • Fit: 4.545455 4.5/5
  • Bang For Your Buck: 4.181818 4.2/5
Filter By Sort By
  • 3/5 Yes, I recommend this product

    January 17, 2013

    Great, but missing one piece

    The boss intake is a great piece. It adds a lot of high rpm horsepower with the correct tune. The install kit leaves a bit to be desired. This kit is missing the electrical connection for the purge valve. You have to splice the wire after instillation. The electrical connection is at the front of the manifold on the passenger side, after instillation the connector is moved to the driver side behind the manifold. For 200+ bucks I would think this would be included.

    KurtDog

    Year: 2012 Model: GT Driving Style: Daily Driver 'Stangs I have owned: 4 California, USA

    Helpful (4) (0)

  • 5/5 Yes, I recommend this product

    January 13, 2013

    boss 302 manifold install kit

    First off if you are planning on installing the boss manifold I highly recommend ordering this kit with the manifold otherwise you will be dealing with a check engine light and a "check fuel inlet" message. And eventually dtc's of running too lean..so do yourself a favor and do it right. This kit doesn't come with everything you need but what is lacking is no big deal. What you need that isn't in the box..18-22 gauge wire, enough for relocation of the plug into the rear of the manifold (be sure to mark wires before wrapping them together with electrical tape), 4 wire connectors..3 zip ties (to tidy of loose wires) and a 3/8 fuel line removal tool for removing the original fuel line..this info should keep you from making more than one visit to the auto parts store. Also in case anyone is wondering, this kit does work on the 2013.

    Blind

    Year: 2013 Model: GT Driving Style: Daily Driver 'Stangs I have owned: 1 Houston, TX, USA

    Helpful (2) (0)

  • 5/5 Yes, I recommend this product

    April 20, 2013

    Must have for Boss Intake

    I purchased this install kit along with the BOSS power pack. After reviewing the BOSS Intake installation instructions from another AM customer, I did not like the idea of relocating the stock purge valve. The original directions say to delete the purge valve, but with any new engine, disconnected electrical connectors and unused parts may cause an engine light. Yes you still have to relocate the purge valve elecrical connector, but its only 2 wires. I made my own harness; cut the connector, heat-shrinked the connections, cut 2 16 ga. pieces of wire about 15" long, wrapped it in electrical tape, and used 3/8 plastic wiring harness available at any auto parts store and routed it along the factory harness to the back left of the new purge valve. I did not use the factory air tube because I ordered a CAI. The new purge valve is the main piece you will need with the bracket, and one other of the lines in the kit. That's the reason I rated the price 4 out of 5. No engine lights after start up and 100 miles, so I'm happy. If you are hesitating on this part, and have ordered the BOSS Intake, don't think twice. It makes the BOSS install much easier, and in my case, no engine lights. The minor fabrication of the harness is much more easier than the alternative of relocating the purge valve. It makes for a much cleaner factory look. I used blue wiring harness to designate aftermarket harness, but you can use black. Just make sure you do it neatly and zip tie it.

    JoeS302

    Year: 2012 Model: GT Driving Style: Daily Driver 'Stangs I have owned: 2 Pleasant Prairie, WI, USA

    Helpful (3) (1)

  • 5/5 Yes, I recommend this product

    July 06, 2013

    Install Kit

    This install kit is great if your going to be using your stock CAI. The stock tube is larger than the one in the kit, when I installed the original tube I realized the angle was sitting much higher and my hood would not close without really putting a lot of pressure on it, after looking around and taking it off and comparing the two I noticed underneath the tubes is are 2 not sure what to call them but extensions on the tube, they are right below the 2 hoses that have to be reconnected. Anyways when comparing the 2 tubes the one in the kit is much smaller and sits in the bay properly so you can close the hood with now problem. You also get a new purge valve and fuel line hose, the purge valve hose connects perfectly to the new location of the purge valve on the mani and looks as if the car came that way. So if your staying stock CAI I highly recommend this purchase, if you have an after market CAI then just use the instructions from the customer submitted install on the Boss intake.

    Nay12

    Year: 2011 Model: GT Driving Style: Daily Driver 'Stangs I have owned: 2 Fort Worth, X

    Helpful (1) (0)

  • 5/5 Yes, I recommend this product

    March 23, 2013

    neede kit

    if you are going to install the Boss 302 intake manifold, you need this kit. the only thing that i wish it had, would be a wire pigtail for the purge valve.

    JIMartin

    Year: 2011 Model: GT Driving Style: Daily Driver 'Stangs I have owned: 2 Spokane, WA, USA

    Helpful (1) (1)

  • 5/5 Yes, I recommend this product

    March 22, 2013

    Removes a little low end grunt but hold the heck on!

    This modification coupled with a CAI, and Bama tune. Changes the loadout of how the coyote engine delivers power. We've heard it before, but this mod I feel makes the car more streetable. That being said, if you put your foot down and get it to redline the car becomes a rocket.

    shdobxr

    Year: 2012 Model: Other Driving Style: Daily Driver 'Stangs I have owned: 1 NOVA, VA

    Helpful (1) (1)

  • 3/5 Yes, I recommend this product

    May 29, 2012

    One more cable would help

    I bought the install kit because it says it has everything you need to install the intake. I wish it would include an extra cable with a connectore so you don't have to splice wires to complete the install.

    Sprintradc

    Year: 2012 Model: GT Driving Style: Daily Driver 'Stangs I have owned: 2 Joliet, IL, USA

    Helpful (1) (1)

  • 3/5 Yes, I recommend this product

    March 15, 2014

    Stock look

    This kit is easily installed and gives the completed install a stock look. Only problem is, if you are installing a CAI you don't need the intake tube and there is no real reason to replace the fuel line, so you are paying $200 for two fuel purge valve lines.

    GrumpyBill

    Year: 2013 Model: GT Driving Style: Street / Strip 'Stangs I have owned: 2 Connecticut, USA

    Helpful (0) (1)

  • 5/5 Yes, I recommend this product

    September 26, 2012

    Awesome kit

    I bought this kit to install my Boss 302 intake with. This kit had everything! Yeah there is a $10 kit.....but that looks cheap, I wanted that OEM look.

    DarkKnight06

    Year: 2012 Model: GT Driving Style: Daily Driver 'Stangs I have owned: 2 Houston, TX

    Helpful (1) (2)

  • 5/5 Yes, I recommend this product

    December 20, 2011

    makes for a clean and easy install

    was really nice didnt have to make parts fit just buy this kit and it makes for a easy install.also makes the manifold look like its supposed to be there not some cheasy add on

    tobyduke

    Year: 2012 Model: GT Driving Style: Street / Strip 'Stangs I have owned: 4 riverside,ca

    Helpful (0) (3)

More Products You Might Like

Related Categories