Ford Performance Ring and Pinion Gear Kit; 3.55 Gear Ratio (05-09 Mustang GT)Find parts that fit my vehicle

Improve ET's and low end torque. Are you looking to get more low end grunt off the line and lower ET's at the same time? Then look no further than installing a set of steeper gears in your Pony. Ford Racing Ring and Pinion Gears are perfect for street, road, or race use.

Superior Quality. These Ford Racing 3.55 Mustang ring and pinion gears feature a super strong forged construction, CNC cut & lapped gear teeth, and a black oxide finish to resist corrosion.

Recommended Upgrade. Changing the rear axle gear ratio will throw off the calibration of your Mustangs speedometer, but a Ford Racing Speedometer Recalibration Tool is an inexpensive way to fix this issue.

Application. This Ford Racing Ring and Pinion Gear set will fit all 2005 to 2010 V8 Mustangs including the GT, Bullitt and GT500 models. A master bearing kit is recommended by most installers, especially on high mileage vehicles, see drop down option above.

Attention 2010 and newer Mustang Owners. Starting in 2010 Ford changed the inner rear gear pinion bearing in all 8.8" equipped Mustangs. Because of this you will require a new 8.8" rear gear pinion bearing (Ford part# 9L3Z-4630-A) for proper installation, please see drop down option above.

Technical Note. Installation costs will vary, but a good rule of thumb is between $250 and $300. Be sure to work with a reliable shop that you trust for installations. You can also save money on your installation labor by having your Trac-Lok rebuilt at the same time as your gears are installed, see drop down option above.

CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov