WIN $5,000 For Your Mustang! Enter Now
Talk to a Mustang Expert
1-888-332-7930
Mon-Thu 8:30a-11p, Fri-Sun 8:30a-9p

Free Shipping - Get it by Dec. 24th available on most items - Details

Ford Performance 5.0L 1/2 in. ETI Heat Spacer GT40 Intake (86-95)

Market Price $76.64 You Save 5% ($3.65)

$72.99

FREE Shipping
  • Item 50587
  • MPN# M-9486-A52

In Stock Ships same business day. Choose options to add to cart

Features & Details

  • Reduce Heat Transference
  • Westinghouse Type C Phenolic Material
  • Genuine Ford Racing Part
  • 1/2" Thick
  • Made in the USA
  • Fits 1986 to 1995 5.0L V8 Mustangs w/ GT40 or Cobra Intake Manifold

Product Resources

Customer Reviews (7)
Reduce Heat. The Ford Racing GT-40/Cobra Intake Manifold Phenolic Spacer Kit is designed to reduce heat transference between the the upper and lower intake manifold to lower inlet air temperature to increase horsepower and allow for increased timing with less detonation.

Ford Racing Quality. CNC machined in the USA from Westinghouse Type C phenolic material this 1/2" Intake Manifold Spacer includes longer bolts and gaskets needed for installation.

Application. This 1/2" Ford Racing GT-40 Intake Manifold Phenolic Spacer Kit is specifically designed for use on the 1986 to 1995 5.0L Mustang with the GT-40 or Cobra intake manifold installed.

Fitment: 1986 1987 1988 1989 1990 1991 1992 1993 1994 1995 Details

What's in the Box
  • (1) 1/2" Phenolic spacer
  • (2) Intake gaskets
  • (2) 6" bolts
  • (2) 5-7/16" bolts
  • (2) 1-3/16" bolts
  • (6) Flat Washers
Installation Info
Will it fit my Mustang?
  • Cobra - 94, 95
  • Foxbody - 86, 87, 88, 89, 90, 91, 92, 93
  • GT - 94, 95

Most Helpful Reviews

5/5
Another great Ford Racing part.

If I can I always try to buy a Ford racing part they always match well when using other factory Ford parts.

Helpful (1)

5/5
It's from Ford

Keeps upper cooler for a bit longer till it gets heat saturated from the engine compartment.One of the best reason about this spacer is to be able to get the valve covers off with out yanking the inta ...

Read More
Helpful (1)

Overall Rating 4.7 out of 5 stars
Read All 7 Reviews

Customer Photos

You Might Also Like

Q & A

No questions about this product yet.

Ask the First Question

More Products You Might Like

Customer Reviews (7) Write a Review

Overall Rating 4.7

out of 5 stars

Installation Time:Less than 1 Hour

  • Performance Gain 3.428571 3.4
  • Fit 4.142857 4.1



  • 5/5

    Installation Time: Afternoon

    January 18, 2015

    It's from Ford

    Keeps upper cooler for a bit longer till it gets heat saturated from the engine compartment.One of the best reason about this spacer is to be able to get the valve covers off with out yanking the intake!

    RiptaR

    Year: 1988 Submodel: GT New England

    Helpful (1) (0)

  • 5/5

    Installation Time: Afternoon

    October 09, 2014

    Another great Ford Racing part.

    If I can I always try to buy a Ford racing part they always match well when using other factory Ford parts.

    Boss429t

    Year: 1991 Submodel: Other Mabank, TX, USA

    Helpful (1) (0)

  • 5/5

    Installation Time: Less than 1 Hour

    December 20, 2013

    Ford Racing 1/2 Spacer

    Had to buy this spacer to gain adequate clearance between my Ford Racing valve covers and my upper intake plenum on my 1995 GT. The spacer was just the ticket and made just enough room for everything to fit. It was a pretty tight fit with my stock hood. The front bolt on my explorer intake plenum just barley makes contact with the hood when closed but does fully close. So make sure before you get this your hood will work, I'm using energy suspension motor mounts which are said to lower the motor 1/2 inch over stock so that was my saving grace. The only gripe i had with this kit was the fact that none of the supplied mounting hardware worked.. It was all to short for my intake, the stock long bolts actually fit perfect and as for the two short bolts i went to my local hardware store and found the right length. Over all the spacer did exactly what i needed it to and i couldn't be happier. I will say i would't buy it for performance though. Good band for your buck!

    Will94

    Year: 1995 Submodel: GT Jacksonville, FL, USA

    Helpful (1) (0)

  • 4/5

    Installation Time: Less than 1 Hour

    February 21, 2016

    Great product but....

    I really like the quality of the spacer but unfortunately it came with new upper bolts that were too short for my cobra intake. Not sure why exactly as the description states GT-40/Cobra intakes. Very disappointing. My review 4 stars overall but 1 for fit and I haven't got new bolts yet so I cant speak to performance.

    95snake

    Year: 1995 Submodel: Cobra Rochester, NY

    Helpful (0) (1)

  • 5/5

    Installation Time: Less than 1 Hour

    July 23, 2014

    Great fit!

    Spacer fit great and didnt take long to put on. Came with all necessary hardware. Awesome product!

    Ludespd

    Year: 1992 Submodel: GT Mauldin, SC, USA

    Helpful (0) (1)

  • 5/5

    Installation Time: Afternoon

    December 07, 2016

    Well done, American Muscle

    Great product, fast shipping, you wont notice a power difference with just this mod but its the logic of cooling the air before the engine gets that makes you feel good =)

    seanytwoshoes

    Year: 1988 Submodel: GT

    Helpful (0) (0)

  • 4/5

    Installation Time: Less than 1 Hour

    February 18, 2016

    FORD RACING 1/2" GT 40 INTAKE SPACER

    Spacer and gaskets fit no issue. Only one problem, the outer 4 bolts that were supplied are too long. Come on man....!!!!!!

    VIT

    Year: 1991 Submodel: Other OH

    Helpful (0) (0)

Related Mustang Categories