Win This Supercharged 2015 Mustang Enter Here
1-888-332-7930 M-F 9-9,Sat 9-5:30,Sun 12-4 ET

Free Shipping on Everything. Seriously. Details

Matte Black Mach 1 Hood Decal (99-04 Mach 1)

19 Reviews
Our Price

$29.99

  • Item #26181
  • Market Price $34.99
  • You Save 14% ($5.00)
In Stock Ships same business day.
Free Shipping on Everything
Customer Photos
Features
  • Perfect replacement
  • Premium cast matte black vinyl material
  • Includes upper and lower hood decal
  • Fits 03-04 Mach 1's
Description
Perfect Replacement. Has your stock factory Mach 1 Hood Decal seen better days? Well AmericanMuscle now offers a replacement Matte Black Mach 1 Hood Decal for your 2003-2004 Mach 1 Mustang cut to the exact dimensions of the original.

Perfect Fit Guaranteed. Our vinyl designs have been test fit, refined, and tested again on our very own fleet of vehicles to assure a perfect fit every time.

Superior Quality Materials. We use the highest quality Premium Cast Vinyl available on the market today - designed to last at least 8 years of harsh outdoor weather. It's far more durable than our competitors' cheap, calendared vinyl film which starts to degrade in just a couple of years!

Application. This hood decal is designed as a direct replacement for the 2003 - 2004 Mach 1.

Mustang Fitment: 2003 2004 Details

What's in the Box
  • (1) Hood Decal
    Tools included:
  • (1) Squeege
Installation Info
Will it fit my Mustang?
  • Mach 1 - 03, 04

Fits 03-04 Mach 1s

Most Helpful Reviews Read All Reviews

Overall Rating 4.4/5 Write a Review
3/5
Not a perfect fit like it says above

I bought my Mach 1 used without a decal on so it left a tan where the decal should be. I had the decal professionally installed and he told me the tan lines are still visible due to the decal being narrower

Read More
Helpful (3) (0)

5/5
amazing results

looks as good as original,read directions over well as you only get one shot,a great deal for the quality,good luck

Helpful (1) (0)

Customer Photos (15) View All Customer Photos

You Might Also Like

Q & A

No questions about this product yet.

Ask the First Question

Reviews (19) Write a Review

  • 5 Stars .58 58%
  • 4 Stars .26 26%
  • 3 Stars .16 16%
  • 2 Stars 0 0%
  • 1 Stars 0 0%
4.4

out of 5 stars

17 Customers Recommend this Product

Installation Time:Afternoon

Installation Cost:0-$100

  • Fit: 4.421052 4.4/5
  • Appearance: 4.631579 4.6/5
  • Bang For Your Buck: 4.421052 4.4/5
Filter By Sort By
  • 3/5 No, I do not recommend this product

    May 27, 2012

    Not a perfect fit like it says above

    I bought my Mach 1 used without a decal on so it left a tan where the decal should be. I had the decal professionally installed and he told me the tan lines are still visible due to the decal being narrower than the stock one. Appearance: Great from far. Terrible up close. Fit: Narrower than stock. I don't suggest getting this product especially if you want your car perfect like I do. I hope somehow I can get my money back cause the fitment really sucks and really aggravates me.

    Fonzie

    Year: 2003 Model: Mach 1

    Helpful (3) (0)

    • Response from AmericanMuscle

      I'm sorry to hear your new hood decal didn't fit as it should. Customer service should be getting in touch with you shortly. I've passed along your feedback as well to have the fit of this hood decal checked and tested to ensure this doesn't happen again!

      Lisa , Customer Care

  • 5/5 Yes, I recommend this product

    January 27, 2012

    amazing results

    looks as good as original,read directions over well as you only get one shot,a great deal for the quality,good luck

    machdee

    Year: 2003 Model: Mach 1 Driving Style: Street / Strip 'Stangs I have owned: 4 biloxi,ms

    Helpful (1) (0)

  • 4/5 Yes, I recommend this product

    October 01, 2012

    I was pretty nervous/worried

    I did vinyl work on the rear of my car but this was far more important to me since I needed to replace the stripe that was currently on the car since it had chipped pretty bad (factory stripe after 8 years and it will do that) Make sure you get all the adhesive off from the old stripe if there was one (I cannot stress that enough). After that is done make sure you wash the hood of the car and then I used some rubbing alcohol right before the install to get rid of any wax/soap/residue that was left on the hood (where I was applying the sticker). Be careful not to stretch it when peeling it off from the waxy paper it came on as well. The sticker went on well (just make sure you use soapy water on the hood and the back of the vinyl while applying it) and I would say it is a very small amount skinnier (width wise) than the original factory stripe. I could see where the old one was on the hood and this basically covered the entire thing. Probably a centimeter on each side of the stripe, nothing noticeable. You cannot beat this for the cost. They will be more expensive everywhere else and this was great quality vinyl. Looks exactly like the old one did just without and chips or scratches. I was nervous b/c of some of the reviews but I would order this again and I will if I ever need to replace that front stripe on my Mach again.

    Top 250 Contributor

    Shook1db

    Year: 2004 Model: Mach 1 Driving Style: Street / Strip 'Stangs I have owned: 2 MI

    Helpful (0) (1)

  • 3/5 No, I do not recommend this product

    August 12, 2014

    Not as easy as you think.

    Well I'm just gonna have to try again. But I set up nice, measured out where I was gonna place it, set it down perfectly, but I just couldn't get all the air bubbles out, no matter how hard I squeegeed. Yes I worked inside to out, Yes I used a ton of soap and water, but in the end, It just looked bad. More than ten feet I'm good, but no shows for me anytime soon. I'm gonna try again, but if the second time is a no go then, I'm just gonna paint it on.

    RoDo

    Year: 2003 Model: Mach 1 Driving Style: Daily Driver 'Stangs I have owned: 4

    Helpful (0) (0)

  • 4/5 Yes, I recommend this product

    April 20, 2014

    Smaller than stock.

    Smaller than stock but a fraction of the price. about 1/4 inch narrower than factory decal but about the same length. Buying factory decal is way over priced.

    MustangMike36

    Year: 2003 Model: Mach 1 Driving Style: Daily Driver 'Stangs I have owned: 10+ Jackson, NJ

    Helpful (0) (0)

  • 4/5 Yes, I recommend this product

    November 21, 2013

    Good for those on a budget. Not a perfect fit but looks fine.

    Priced well, looks fine, it's about 1/8 inch narrower on both sides than stock. Took less than 30 minutes to install and was easy to do. All in all, happy with the product for the price.

    Jroberts427

    Year: 2003 Model: Mach 1 Driving Style: Daily Driver 'Stangs I have owned: 4 Utah, USA

    Helpful (0) (0)

  • 5/5 Yes, I recommend this product

    September 02, 2013

    Back in Black

    I have a 2004 black mach 1 and the hood decal was beginning to peel. So when I had the car completely repainted I went to ford for the decals. Let's just say they wanted an arm and a leg for them. So when I saw this baby on sale at AM my wallet jumped for joy and the stripe is a perfect match and is made of a quality material. I recommend this product for all mach owners that want their baby to look like she just rolled of the showroom floor

    BLACKMACH281

    Year: 2004 Model: Mach 1 Driving Style: Show 'Stangs I have owned: 2 Long Beach, MS, USA

    Helpful (0) (0)

  • 5/5 Yes, I recommend this product

    May 06, 2013

    Awesome

    Good product much cheaper than from ford and does not look any different

    Dapmach1

    Year: 2004 Model: Mach 1 Driving Style: Show 'Stangs I have owned: 5 Tulsa, OK, USA

    Helpful (0) (0)

  • 5/5 Yes, I recommend this product

    March 26, 2013

    Just Like the Original

    Really easy to do and didn't even take me 30 minutes. I've had it on now for almost half a year and it still looks just like the very first day I installed it.

    LacMach91

    Year: 2003 Model: Mach 1 Driving Style: Daily Driver 'Stangs I have owned: 2 Sacramento

    Helpful (0) (0)

  • 5/5 Yes, I recommend this product

    March 05, 2013

    mach stripe

    I was very skeptical about how this would come out. I've had experience with tail light tint but this was a lil more important. make sure you are very liberal with the soapy water and let the stripe dry for at least an hour. It ended up coming out great and i am very pleased.

    Rippetoe

    Year: 2004 Model: Mach 1 Driving Style: Daily Driver 'Stangs I have owned: 1 Irving tx

    Helpful (0) (0)

More Products You Might Like

Related Categories