Free Horsepower: Win a C&L Cold Air Intake & Bama Performance Tuner Enter to Win
1-888-332-7930 M-F 9-9 EST, Sat 9-5:30 EST

Free Shipping on Everything. Seriously. Details

MMD Headlight Splitters - Pre-painted (10-12 V6)

AmericanMuscle no longer carries the MMD Headlight Splitters - Pre-painted (10-12 V6). Please check out 2010-2014 Pre-painted Mustang Parts for an updated selection.
9 Reviews
Our Price

$129.99

  • Item #41229
  • Market Price $149.99
  • You Save 13% ($20.00)

Select Year

2012 2011 2010

Select Color

    Free Shipping on Everything

    AmericanMuscle no longer carries the MMD Headlight Splitters - Pre-painted (10-12 V6). Please check out 2010-2014 Pre-painted Mustang Parts for an updated selection.

    Product Videos Customer Photos
    Features
    • Matches 2010-2012 Factory Mustang Colors
    • Painted Right Here at AmericanMuscle!
    • Aggressive GT-R styling
    • Durable automotive grade ABS
    • Sold as a set of two splitters
    • Fits 2010-2012 and newer V6 Mustangs
    Description
    Aggressive GT-R styling. The GT-R was a Concept Race Mustang that packed both power and styling and now you can have the look of its iconic headlight splitters for your very own Pony. These MMD GT-R style Mustang headlight splitters are the ultimate accent to your Mustang's sexy styling and are pre-painted to match your Mustangs factory color straight out of the box! Painted Here to Match 2010-2012 Factory Mustang Colors. These Modern Muscle Design Mustang Headlight Splitters are painted right here, at AmericanMuscle HQ, to match your stock Ford Mustang colors exactly. They will give your Pony a sleek, sexy appearance that will make it stand out from the rest of the herd.

    Durable Material. Constructed of a durable injection molded ABS plastic, these MMD Mustang headlight splitters are painted with the same base coat and clear coat urethane paint Ford uses on the exterior of your Mustang for a perfect color match.

    Simple Install. No messy glue or drilling is required for installation. This set of two Modern Muscle Design Mustang headlight splitters are designed to install simply with the supplied 3M doubled sided automotive bonding tape for a quick and easy installation.

    Application. These MMD Pre-painted Mustang headlight splitters are designed to be a perfect fit on any 2010 to 2012 V6 Mustang and are sold as a set of two, one driver side and one passenger side. Does

    not fit GT or Shelby GT500.

    Find Your Paint Code

    • Choose the year of your Mustang from the options above. The color choices displayed will be the only exterior paint colors available for your year Mustang. The first two letters for each color option are the paint code for your exterior color.

    • If you need to verify your paint code, look inside the door jam of your driver's side door at your VIN plate to find your exterior paint code.

    These headlight splitters are also available Unpainted for those who like to do-it-yourself.

    Mustang Fitment: 2010 2011 2012 Details

    What's in the Box
    • (1) Left Headlight Splitter
    • (1) Right Headlight Splitter
    • (2) 3m Tape
    • (1) Alcohol Packs
    • (1) Adhesion Promoter
    • (1) American Muscle Instructions
      Hardware included:
    • None Required
    Installation Info
    Fitment
    • V6 - 10, 11, 12

    Most Helpful Reviews View All

    Overall Rating 4.2/5 Write a Review
    3/5
    New aggresive look

    I installed these the other day, the paint was spot on from AM. It gives the '11 V6 a great aggressive new look. THE BIGGEST PROBLEM THAT I HAD WAS the damn 3M tape DOES NOT HOLD WORTH CRAP, even when

    Read More
    Helpful (5) (0)

    3/5

    Top 1000 Contributor

    Awesome look, horrible to install.

    First let me say, this is by far my favorite dress-up mod for the car. They give the car a fantastic sleek look that really catches your eye. I took my time and followed the instructions exactly. There

    Read More
    Helpful (3) (0)

    Videos

    Customer Photos (8) View All

    You Might Also Like

    Q & A (1 Questions, 0 Answers) Ask a Question

    Will these work with the smoked headlight covers? i was wondering if these will fit the smoked headlight covers

    robbydiesel Year: 2012 Model: V6

    Be the First to Answer This Question
    Good Question (0) (0)

    Reviews (9) Write a Review

    • 5 Stars .44 45%
    • 4 Stars .33 33%
    • 3 Stars .22 22%
    • 2 Stars 0 0%
    • 1 Stars 0 0%
    4.2

    out of 5 stars

    8 Customers Recommend this Product

    Installation Time:Afternoon

    Installation Cost:0-$100

    • Color Match: 5 5/5
    • Fit & Finish: 2 2/5
    • Appearance: 5 5/5
    • Bang For Your Buck: 4.571429 4.6/5
    Filter By Sort By
    • 3/5

      New aggresive look

      July 09, 2011

      I installed these the other day, the paint was spot on from AM. It gives the '11 V6 a great aggressive new look. THE BIGGEST PROBLEM THAT I HAD WAS the damn 3M tape DOES NOT HOLD WORTH CRAP, even when you use the 3M adhesive promoter that AM gives you. You have to make sure you use enough adhesive promoter bc if you don't they will fall off the tape. I'm actually taking them to a body shop next week to get them professionally installed with a different type of permanent adhesive. I suggest you take any parts that require 3M auto tape to a trusted body shop so they can use something better than that 3M crap.

      Steve

      Year: 2011 Model: V6 Driving Style: Daily Driver

      Helpful (5) (0)

    • 3/5

      Awesome look, horrible to install.

      June 10, 2012

      First let me say, this is by far my favorite dress-up mod for the car. They give the car a fantastic sleek look that really catches your eye. I took my time and followed the instructions exactly. There were no alcohol pads included with them as the instructions called for, but thankfully I had some already. They looked great right after I put them on, but within ten minutes, the ends were peeling up. No matter how much pressure I applied they would not stay down. I took them to a body shop and they removed all the tape that came on them, cleaned both surfaces thoroughly, applied adhesion promoter and professional grade tape, and installed them again. Once again within a few minutes the ends came up again. I am going to follow another reviewer's (and the body shop owner's) advice and sand the back of them so they sit flat against the headlight without pushing on them, then put the tape on and install them. It's going to be a very time consuming project, but I'm sure the end result will be well worth it. I just wish that they had fit better right out of the box.

      Shadow16508

      Year: 2012 Model: V6 Driving Style: Daily Driver 'Stangs I have owned: 1 Erie, PA, USA

      Helpful (3) (0)

    • 4/5

      I Like them !

      March 15, 2012

      As stated in another review, the paint match and finish was right on. A few words of caution: Because of the fit and finish of your headlight lens and the new splitters, they may not sit flat and flush against each other. If not, you will need to trim the splitters being careful not to chip or scratch the paint of the splitters ( I used a small sanding block). If they do not sit flat against the headlight lens the ends will not hold with the 3M tape and glue promoter. Take your time and I think you will be happy, I was.

      Wingnut

      Year: 2010 Model: V6 Driving Style: Daily Driver Orlando, Florida

      Helpful (2) (0)

    • 5/5

      Headlight Splitters-Pre-painted

      August 15, 2011

      I Liked them when they came in through the mail and the Instructions seemed a lot more easier than what it really was so, I am going to have to take them to a body shop to have them put on.

      Kristie Nuckols

      Year: 2011 Model: GT Driving Style: Daily Driver

      Helpful (2) (0)

    • 5/5

      look nice but bad tape and not curved like the headlight

      February 23, 2013

      looks great on your stang only problem is the tape they use is cheap and comes off and the splitters are not curved like the lights i had to sand and heat them to contour the light appropriately but they do look awsome once installed

      grabber301

      Year: 2011 Model: V6 Driving Style: Show 'Stangs I have owned: 1 nj

      Helpful (1) (0)

    • 4/5

      Looks Great, but Adhesive is Very Poor

      July 30, 2012

      As mentioned in the other ratings the adhesive does not work well with the way the splitters are curved. The tape is not strong enough to hold the part flush. I still need to take to a body shop or get a stronger adhesive but they do look nice while they temporarily stick.

      ShaneD

      Year: 2012 Model: V6

      Helpful (1) (0)

    • 4/5

      Awesome look, horrible fitting

      July 03, 2012

      These look awesome on my car just they do not fit right at all on the headlight. I tried doing them myself and the end just kept sticking off since it is not fitted correctly for the mustang headlights. I took em to a shop when I got some other body work done and they put some more permanent applications on it and they look awesome but again these will not go on with the 3m tape and adhesive that AM sends you.

      Rscary

      Year: 2010 Model: V6 Driving Style: Daily Driver 'Stangs I have owned: 2

      Helpful (1) (0)

    • 5/5

      Bad glue

      June 05, 2012

      The product looks great but they need better glue. The do not fit right for my 2010 and the glue kept coming off. I had to use some crazy glue in a few areas and the job was done.

      Salomon529

      Year: 2010 Model: V6 Driving Style: Daily Driver 'Stangs I have owned: 2 Louisiana

      Helpful (1) (0)

    • 5/5

      Luv 'em

      September 25, 2013

      Splitters went right on, 10 minutes. I've gotten many compliments on how they change the appearance.

      V6Jim

      Year: 2012 Model: V6 Driving Style: Daily Driver 'Stangs I have owned: 3 San Marcos, Ca.

      Helpful (0) (0)

    More Products You Might Like

    Related Categories