WIN $5,000 For Your Mustang! Enter Now
Talk to a Mustang Expert
1-888-332-7930
Mon-Thu 8:30a-11p, Fri-Sun 8:30a-9p

Free Shipping on Everything. Seriously. Details

Smoked Third Brake Light Tint (05-09 All)

Market Price $24.99 You Save 20% ($5.00)

$19.99

FREE Shipping
  • Item 26066
In Stock Ships same business day. Choose options to add to cart

Features, Videos & Details

  • Sleek Stealthy Styling
  • Aggressive Smoked Appearance
  • Durable 12 Mill PVC Vinyl Tint
  • Optically Transparent with a Gloss Finish
  • Provides Additional Impact Protection
  • Pre-Cut for Easy Installation
  • Allows Third Brake Light to Shine Through
  • Fits All 2005-2009 Mustangs

Review & Installation Video

Hey everyone I’m Justin from AmericanMuscle.com, here with an easy and budget friendly way to add stealthy styling to your S197 Mustang thanks to our AmericanMuscle graphics smoked tint for your brake, side and quarter marker lights. All AmericanMuscle graphics are designed and produced right here in our vinyl shop, hours of refining and testing have taken place on each vinyl design, ensuring that whatever piece ends up on your car fits perfectly every time. We at AmericanMuscle use only the highest quality premium cast vinyl, ensuring a great look that’s going to last for years to come. Now this is a great alternative to those other methods of tinting your lights, mainly messy dyes, which can be disastrous if done poorly. Installation should only take you about 15 to 30 minutes per light, and should be relatively easy as long as you follow our detailed instructions, and use a little patience. These pieces as seen here on our 2006 GT are sold separately so you can pick and choose what parts you want to tint to achieve your desired level of styling, however if you’re trying to go full on stealth mode, then you might want to pair all of these options together to complete the look. So if you’re looking to add that stealthy styling that is always popular while taking it a little easy on your wallet, you’ll definitely want to check out these smoked vinyl options from AmericanMuscle graphics.

Stealthy Styling. Now you can add custom looks to your S197 Mustang with Smoked Third Brake Light Tint. The Smoked Tint gives your Pony stealthy styling that looks great on the street or the strip.

Perfect Fit Guaranteed. AmericanMuscle Graphics pre-cut vinyl designs have been test fit, refined, and tested again on our very own fleet of vehicles to assure an easy installation and a perfect professional fit every time.

Superior Quality Materials. AmericanMuscle Graphics uses only the highest grade of cast vinyl tint available on today’s market. This 12 Mil thick lens tint is designed for lens tints. Compared to other products that were designed for window sign displays that are generally around 3 mil in thickness. They also are not forgiving to install on the lights compound curve. The material type and the 12 mil thickness provides superior impact protection. The film is also breathable and self-healing polyvinyl film. Our vinyl is rated for continual outdoor use without shrinking or degradation.

Impact Protection. AmericanMuscle Graphics 12 mil thick poly vinyl tint is breathable and features self-healing properties to provide superior impact protection against stones, gravel and small road debris. A must for a daily driven vehicle.

Easier To Install. AmericanMuscle Graphics vinyl designs are not only pre-cut for a simpler installation, but our 12 mil smoked cast poly vinyl tint is extremely pliable allowing it to easily conform to complex compound curves without curling back and the clear permanent solvent polyacrylic adhesive backing will ensure that it stays securely in place.

Application. Designed to fit all 2005-2009 Mustangs the Smoked Third Brake Light Tint matches our smoked taillight tint perfectly.

Fitment: 2005 2006 2007 2008 2009 Details

What's in the Box
  • (1) Third Brake Light Tint
    Tools included:
  • (1) Squeege
Installation Info
Will it fit my Mustang?
  • Bullitt - 08, 09
  • V6 - 05, 06, 07, 08, 09
  • GT - 05, 06, 07, 08, 09
  • GT500 - 07, 08, 09

Most Helpful Reviews

4/5
Tinit

I really liked this product. I have never put tint on before, but it was so simple. It is a great product for causing that blackout effect. I do suggest that you spray a lot on the light and the tint ...

Read More
Helpful (3)

5/5
3rd brake light tint

I was kinda worried about getting the light tint but I did and I can't be happier with the way it looks! I had a body shop actually paint my tail lights so I was worried about the tint...But I purchased ...

Read More
Helpful (2)

Overall Rating 3.8 out of 5 stars
Read All 34 Reviews

Customer Photos (23) Submit Your Photo

View All 23 Photos

You Might Also Like

Q & A

No questions about this product yet.

Ask the First Question

More Products You Might Like

Customer Reviews (34) Write a Review

Overall Rating 3.8

out of 5 stars

Installation Time:Less than 1 Hour

  • Fit 3.285714 3.3
  • Appearance 3.857143 3.9
  • Bang For Your Buck 3.821429 3.8



  • 4/5

    May 05, 2010

    Tinit

    I really liked this product. I have never put tint on before, but it was so simple. It is a great product for causing that blackout effect. I do suggest that you spray a lot on the light and the tint so you are able to move into the right place.

    David Franklin

    Helpful (3) (0)

  • 1/5

    Installation Time: Less than 1 Hour

    September 16, 2014

    Disappointed

    I was excited to install the third brake light tine on my 45th Anniversary car, especially since my turn signals, tail lights, and quarter lights are all tinted. Upon receiving my new tint I removed my third brake light cover (sticks out too far for my liking) cleaned all the adhesive from the light and used the supplied alcohol pad to clean the lens. I promptly began to position my tint and apply it to the lens only to find that no matter how I moved it around or tried to position the tint there was going to be a quarter inch of room on both sides when placed directly in the middle. I was extremely disappointed to find that my sleek idea of tint was quickly being washed down the drain. I immediately peeled the tint back off and placed it on the provided wax paper it was shipped to me on. I would not recommend this product to anyone until it is properly cut to cover the lens in its entirety. Had I installed the tint and left it be it would have stuck out like a sore thumb you could clearly see the bright red peeking out around the edges. This is the first product I have purchased from AM that I was completely let down with.

    MEADE488

    Year: 2009 Submodel: V6 Pike County, KY, USA

    Helpful (1) (0)

    • Response from AmericanMuscle

      I'm sorry to hear you received a tint that wasn't properly cut for your light. Give us call at your earliest convenience so we can get a new one shipped right out for you.

      Lisa , Customer Care

  • 2/5

    Installation Time: Less than 1 Hour

    June 22, 2012

    3rd Brake Light Tint

    I recently bought this tint, quarter marker tint, and hash marks. This was the only piece that did not fit, very disappointed with how this piece did fit. It left red on all edges probably close to 1/8 of inch around. Moved it down to align the bottom at least since the spoiler kind of covers the top.

    KZMD

    Year: 2008 Submodel: V6 OH

    Helpful (1) (0)

    • Response from AmericanMuscle

      I'm very sorry to hear your third brake light decal was too small. I'll make sure a replacement is shipped out right away for you!

      Lisa , Customer Care

  • 5/5

    January 02, 2011

    tail light tint

    had a hard time squeegeeing water out from under this one and its still little loose, so i ordered another one to redo over. they look good once on, but you will need to be prepared up front with something small and flexible to get water out so it will stick down firm.

    richard m

    Helpful (2) (1)

  • 5/5

    December 07, 2010

    Not impressed

    Was not cut right. One side was bigger than the other. Simply would not stick and gets washed off no problem. I do not reccomend this or any of the precut stuff. Easier just to VHT everything.

    V

    Helpful (2) (1)

  • 5/5

    June 01, 2010

    3rd brake light tint

    I was kinda worried about getting the light tint but I did and I can't be happier with the way it looks! I had a body shop actually paint my tail lights so I was worried about the tint...But I purchased the 3rd brake light and the side markers and turn signals and was very pleased with end result! They were very easy to install little bit of trimming also used a hair dryer worked great and looks amazing very pleased thanks AM:-)

    Michele/09 GT Convertible

    Helpful (2) (1)

  • 4/5

    April 15, 2010

    Mustang Third Brake Light Tint

    I sprayed the light with soapy water so I could slide the vinyl tint into place, then squeegee'd the water and air bubbles out with my wife's rubber spatula (I don't have a tint squeegee). It worked like a charm, no bubbles and it is perfectly lined up. Make sure the light is clean or you'll get bumps. The raised letters in the light make it some what difficult to press around. It only covers the face though, so from certain angles you can still see the red edges not covered. I'm afraid to wash with with high pressure or in a car wash, for fear it might just rip off (it is only a sticker...) It seems durable though and is easy to install if you take your time.

    Mac

    Helpful (1) (0)

  • 5/5

    July 04, 2011

    signal Tint

    FANTASTIC! Just what I was looking for. Easy to install and looks fantastic on my mustang.

    steve heis

    Year: 2006 Submodel: GT

    Helpful (1) (1)

  • 2/5

    Installation Time: Less than 1 Hour

    October 14, 2015

    Too small

    About 1/4" too short on each end. Not all that noticable from a distance, just annoying when up close.

    Kuhel

    Year: 2006 Submodel: V6

    Helpful (0) (1)

  • 3/5

    Installation Time: Less than 1 Hour

    September 16, 2011

    3rd brake light weeeellll

    I thought this was going to be easy, but if you don't have patience leave it. It was difficult getting the outer paper off so it made it difficult not ruining the emblem itself. One side seemed to be cut larger than the other so it didn't cover the edges as I would have liked to see. I think it helps hiding that ugly third light and brings a little class to the back end.

    05stang

    Year: 2005 Submodel: V6 Naugatuck Connecticut

    Helpful (0) (1)

  • 5/5

    Installation Time: Less than 1 Hour

    October 23, 2016

    old style guy

    on highland green color makes light less obvious but shows well when brake applied, great quality material and adhesive, easy to install as is no trimming needed, I was going for 60's look- plain,

    oldie

    Year: 2008 Submodel: Bullitt

    Helpful (0) (0)

  • 1/5

    Installation Time: Less than 1 Hour

    October 20, 2016

    To small to fit the light

    In picture this doesn't look all that noticeable, but once in person you can clearly see where the tint is to short and shows the lighter red from the brake light. For $20 I probably wouldn't buy this again

    Nick

    Year: 2005 Submodel: GT

    Helpful (0) (0)

  • 2/5

    Installation Time: Less than 1 Hour

    July 05, 2016

    Does not fit

    I'd rather have a bigger piece and cut it down, rather than having to stretch it. The other tint pieces worked fine! This one was short top and bottom but width wise it was fine. I might buy a third brake light already smoked and be done with it.

    Clay

    Year: 2008 Submodel: GT

    Helpful (0) (0)

  • 2/5

    Installation Time: Less than 1 Hour

    June 22, 2016

    Poor Fitment

    I just put the tint on my 06 GT and the fitment is terrible. There is about a quarter inch on each side of the light still exposed. Looks cheap and it bothers me. I wouldn't recommend buying this product.

    Cman7

    Year: 2006 Submodel: GT

    Helpful (0) (0)

  • 4/5

    Installation Time: Less than 1 Hour

    May 16, 2016

    Simple installation

    This simple install is worth the few bucks that you will spend. With taking your time to ensure that no air bubbles are left behind it only takes a couple of minutes to apply this piece of tint. I installed the third brake light tint, tint on both brake lights and the tint on both side driving lights. This whole process took less than 30 minutes. The one down side is the tint that came for the third brake light was cut a little to short. To compensate for this I had to heat and stretch the tint to make it fit the way it should.

    DocK

    Year: 2008 Submodel: V6

    Helpful (0) (0)

  • 5/5

    Installation Time: Less than 1 Hour

    April 15, 2016

    It's pre cut tint

    So not much to review, it is cut to size, with no overlap or undercut, so that's good. Easy enough to install. Take your time and read the instructions, takes all of 2 minutes. Definitely looks better to tone down all those red's on the back of the car.

    ZeroSarcasm

    Year: 2005 Submodel: GT

    Helpful (0) (0)

  • 5/5

    Installation Time: Less than 1 Hour

    July 28, 2015

    Third Eye Black

    This complemented the brake light decal kit and black frame kit on brakes and rear quarter panel lights very well. I used a razor blade to shave down the raised letters on the lower portion of the lens to allow for more uniform adhesion of the decal. For $10, can't beat it!

    PonyPhil

    Year: 2005 Submodel: V6 NoHo, Ca

    Helpful (0) (0)

  • 4/5

    Installation Time: Less than 1 Hour

    July 11, 2015

    Stealth Look is COOL

    Simple install. It doesn't cover the lense completely, but it will work. Following the instructions, moving it into place can be tricky. Note that it covers the manufacture information on the lense which leaves bumps. Heating it helps, but its still noticeable. I like it better then the orginals which seemed to bright now that the vinyl is on. Much better.

    MellBella

    Year: 2005 Submodel: V6 Pacific Grove, CA

    Helpful (0) (0)

  • 5/5

    Installation Time: Less than 1 Hour

    May 15, 2014

    Legit!

    Was nervous about purchasing these on my black 08 GT500, they go GREAT with the black paint and make her rear look great ;) Super easy install, plug-n-play, and worth all the money. Get compliments non-stop!!

    McShelbyGT500

    Year: 2008 Submodel: GT500 Orange, TX, USA

    Helpful (0) (0)

  • 1/5

    Installation Time: Less than 1 Hour

    April 01, 2014

    Terrible

    The tint was bad quality, the tint didn't even fit, it was about a quarter inch to small on both sides so you could see red on each side, it didn't fit

    quintpul

    Year: 2006 Submodel: GT

    Helpful (0) (0)

    • Response from AmericanMuscle

      It's possible the tint you received simply wasn't accurately cut, unfortunately. We can definitely set up a replacement order for you if you'd like. Please give us a call and let us know when you have a moment.

      Lisa , Customer Care

Related Mustang Categories