Talk to a Mustang Expert
Mon-Thu 8:30a-11p, Fri-Sun 8:30a-9p

Free Shipping on Everything. Seriously. Details

Wheel & Brake Spacers - 3/16 in. - Pair (94-17 All)

35 Reviews
Our Price


  • Item #76162
  • Market Price $19.99
  • You Save 25% ($5.00)
In Stock Ships same business day. Choose options to add to cart
Free Shipping on Everything
Customer Photos
  • Increases Clearance
  • 3/16" (5mm) Spacers
  • Die-Cast Aluminum
  • Sold as a Pair
  • Fit 5 Lug 5x4.5" Mustang Wheels
Additional Clearance. Sometimes certain wheel, tire and brake combinations may require just a little extra clearance to prevent caliper, inner tire or dust cap rubbing. A quick and easy way to solve these problems is with a set of 3/16" (5mm) wheel spacers from AmericanMuscle.

Durable Construction. These wheel spacers are made from light weight die-cast aluminum for durability and strength, these wheel spacers are designed to last a lifetime.

Application. This set of two 3/16 inch wheel spacers are designed for use with 5 lug 5 x 4.5" wheels.

Fitment: 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 Details

What's in the Box
  • (2) Spacers
Installation Info
Will it fit my Mustang?
  • Boss 302 - 12, 13
  • Mach 1 - 03, 04
  • V6 - 94, 95, 96, 97, 98, 99, 00, 01, 02, 03, 04, 05, 06, 07, 08, 09, 10, 11, 12, 13, 14, 15, 16, 17
  • Bullitt - 01, 08, 09
  • Cobra - 94, 95, 96, 97, 98, 99, 01, 03, 04
  • GT - 94, 95, 96, 97, 98, 99, 00, 01, 02, 03, 04, 05, 06, 07, 08, 09, 10, 11, 12, 13, 14, 15, 16, 17
  • GT500 - 07, 08, 09, 10, 11, 12, 13, 14
  • EcoBoost - 15, 16, 17
  • GT350 - 16, 17

Most Helpful Reviews


Great for clearing calipers

Used these spacers to clear the front brakes on my car so i could install my new wheels, worked perfect.

Helpful (1)

Just did not work

Bought spacers to get a little more clearance for the caliber covers. They spaced correctly however they threw my wheel balance off. Tried to adjust and make sure each spacer was centered on the hub, however ...

Read More
Helpful (4)

Overall Rating 4.5 out of 5 stars
Read All 35 Reviews

Customer Photos (15) Submit Your Photo

View All 15 Photos

You Might Also Like

3 Questions / 7 Answers

Ask a Question

Wear on tires or bearings? Will adding spacers to my 2010 GT all four tires cause any extra tire wear or excess bearing wear?


  • I put these spacers on my Mustang a little over a year ago to clear some brake caliper covers. So far I do not see any extra wear and tear on the tires or bearings.


    Good Answer (0) (0)

Show 1 more answer Answer This Question I need this answered (0) (0)

Can I use stock lug nuts? Should I get different lugs that will match stock thread count? I put the spacers on my 2013 GT after purchasing caliper covers. Want to make sure they are safe. Doesn't seem like I have the same amount of threads on the lug bolt.


  • Yes. Stock lug nuts, as well as wheel locks, work fine with these spacers.


    Good Answer (2) (0)

Show 1 more answer Answer This Question I need this answered (0) (0)

Inner Front Tire Worn Does this spacers help front tire to prevent inner tire worn?? i have cobra 03-04 wheels 18x9 on the front with 285/35 tire size inner tire is what i refer where does the brand tire and size come


  • no they only move the wheels out to miss strut towers,or rubbing the inner fender well. sounds like you need a front end alighment. also running 285/35 on 9 inch rims is cutting it close ,you really need 9.5 or even better 10 inch rims, i ran 285/35 on 19x9 inch rims. pappy


    Good Answer (0) (0)

Show 2 more answers Question Resolved

More Products You Might Like

Customer Reviews (35) Write a Review

Overall Rating 4.5

out of 5 stars

  • 5/5

    July 25, 2014

    Great for clearing calipers

    Used these spacers to clear the front brakes on my car so i could install my new wheels, worked perfect.


    Year: 1990 Submodel: GT PA

    Helpful (1) (0)

  • 1/5

    January 06, 2013

    Just did not work

    Bought spacers to get a little more clearance for the caliber covers. They spaced correctly however they threw my wheel balance off. Tried to adjust and make sure each spacer was centered on the hub, however that seem to make things worse. I never thought about a balance problem before install, however it makes sense, they don't have to be off much to create a balance problem. I removed them and now everything is smooth and back to normal. I will return them to AM.


    Year: 2008 Submodel: GT Central Virginia

    Helpful (4) (0)

  • 5/5

    November 21, 2012

    Great product

    I purchased a set of MGP Caliper covers and needed some extra clearance for the wheels. These did the trick. Easy to install and center. I sprayed the back side with 3M 77 spray adhesive and let set up while installing the caliper covers. When I was ready to put the spacers on I lined them up and pressed in place. The adhesive held and allowed a little wiggle room for repositioning as needed to make sure they were centered.


    Year: 2007 Submodel: GT

    Helpful (2) (0)

  • 5/5

    June 04, 2012

    305 wide

    Fixed my tires from rubbing on my exhaust. Have 305's in the rear and just needed a little extra clearance to insure no tire rub. Worked perfect.


    Year: 2004 Submodel: GT

    Helpful (2) (0)

  • 4/5

    December 04, 2015

    3/16" Wheel Spacers

    The 3/16" wheel spacers are an inexpensive solution for tires rubbing on the inside of fender wells or after market wheels rubbing on calipers. These will work without changing the stock wheel studs, but the 5/16" version is too thick and doesn't leave enough threads to mount the wheels. The only problem is getting the spacer centered on the axil so it doesn't through the wheels off balance. I used 3M spray adhesive to glue the space onto the inside of the wheels to keep them centered then bolted the wheels on as usual. That seemed to work well but you may have to do it again each time the wheels are removed.


    Year: 2012 Submodel: V6 Houston, TX

    Helpful (1) (0)

  • 5/5

    April 22, 2013


    The spacers works well up front with stock wheel studs on the 99-04 GT's. Not sure for other years but I haven't had a problem except for trying to center it since it isn't hub centric. Anything larger and you'll have an unsafe amount of threads for your lug nuts. I'd also recommend getting hub centric spacers for larger applications.


    Year: 1999 Submodel: GT

    Helpful (1) (0)

  • 5/5

    December 02, 2012


    The spacers look and fit great, I'm very happy with this product


    Year: 1990 Submodel: Other

    Helpful (1) (0)

  • 5/5

    August 07, 2012

    Wheel spacers & Caliper Covers

    I recently installed MGP Caliper Covers on my 04 Mach 1. Before I began the installation I was a little concerned with the spacing between the wheel and the caliper. It just barely made the 1/4" of recommended clearance so I purchase a set of the 3/16" spacers to make sure that I would not run into any problems. They worked out great. I used the existing clips that were already on the lug bolts to hold the spacer in place and keep it centered when I installed my wheels. The spacer worked out great and the finished job look terrific.


    Year: 2004 Submodel: Mach 1 Dover, PA 17315, USA

    Helpful (1) (0)

  • 4/5

    April 23, 2012

    5 MM wider

    Great product. Elongated holes make it difficult to center on the hub. Overall money well spent.


    Year: 2003 Submodel: GT Canada

    Helpful (1) (0)

  • 5/5

    August 05, 2013

    Serves it purpose well.

    When I installed these spacers I had lowered my GT, with Whiteline front and back sway bars. After lowering, it seemed like the body had shifted right up front. Causing a recessed look on 1 front wheel. It was only by 3/16 of an inch. I used the spacer to get wheels even. Although the spacer was a very little measurement, it made a difference. They were small enough to use on front and back wheels, leaving plenny of stud to mount wheels. I did use ATV to keep spacers centered. I didn't notice any NVH. For what I used it for, It worked out great.


    Year: 2011 Submodel: GT Seneca, SC, USA

    Helpful (0) (1)

  • 5/5

    April 27, 2012

    Perfect fit! Great product!

    I purchased these wheel spacers along with the fr500 17X315 tires in the rear in order to ensure I wouldn't rub and they worked just as advertised. I have about a half inch from my tires to my IRS subframe bolts and they fit perfectly. These spacers are extremely light weight, aren't too big, and leave plenty of room on the lugs to tighten the wheels down. These spacers not only work good but they make your mustang look good too by creating an even wider stance! Overall, great product and I would recommend these to anyone.


    Year: 1999 Submodel: Cobra St Peters, MO, USA

    Helpful (0) (1)

  • 2/5

    October 09, 2016

    Wasnt Satisfied with Cast part

    Appear to be unfinished cast part. Decided to go with machined spacers instead. Build quality looked cheap.


    Year: 2016 Submodel: GT

    Helpful (0) (0)

  • 5/5

    September 12, 2016

    Great buy

    I bought these spacers with some doubt. But install was very easy. I used some 3m adhesive spray to hold them in place. Wasn't too hard to center them. My wheels acted like a template on the rear hubs. They centered perfectly. Gave me just what I wanted to bring my tires out a bit. Looks great. No vibration at all. Although I have only had my car up to 120mph but at that speed very smooth.


    Year: 2015 Submodel: GT

    Helpful (0) (0)

  • 5/5

    September 09, 2016

    Claiper Cover Spacer

    Spacer worked perfectly moving my torque thrust wheels out enough to clear caliper covers but not to far to change the look. Excellent


    Year: 2005 Submodel: V6

    Helpful (0) (0)

  • 5/5

    August 16, 2016


    Needed spacers front and rear to get adequate clearance for brake caliper covers for my 2006 GT Conv.


    Year: 2006 Submodel: GT

    Helpful (0) (0)

  • 5/5

    August 10, 2016

    Work amazingly!

    These were perfect after installing huge aftermarket brakes that the wheels couldn't fit over.


    Year: 2011 Submodel: GT

    Helpful (0) (0)

  • 5/5

    August 09, 2016

    Spacer savers

    Just what I needed to finish my caliber cover install .


    Year: 2014 Submodel: GT

    Helpful (0) (0)

  • 4/5

    June 21, 2016

    Gets the job done.

    Good product, installation a little tough due to it not being easy to center the spacer but no big deal still only took minutes to get it all on.


    Year: 2006 Submodel: V6

    Helpful (0) (0)

  • 4/5

    June 17, 2016

    3/16" wheel spacers

    Good product! I needed just a little more clearance for my caliper covers and these did the trick! The spacers are basically set up as a universal bolt pattern therefore I had to play around with adjusting them to get in the center of my wheel. I installed them ... Then snugged my wheel on and hand spun the wheel adjusting the spacer until it was as close to center as possible. Then torqued the lug nuts to spec. Would be an awesome product if they came with the exact bolt pattern then there would be no messing around with adjustments!


    Year: 2006 Submodel: GT

    Helpful (0) (0)

  • 5/5

    June 07, 2016

    3/16 spacer

    Product is excellent quality and will give anyone with a 99-2004 mustang get the clearance from the front brake calliper a from rubbing when you are installing factory ford rims 18 inch or bigger.


    Year: 2002 Submodel: GT

    Helpful (0) (0)

Related Mustang Categories