How to Install a Chrome Power Steering Cap Cover on your 1996-2010 Mustang GT

This Mustang Parts Installation Guide Works For

Chrome Power Steering Cap Cover (96-10 4.6L)DOWNLOAD PDF

Tools Required

Installation Time: 15 Minutes


This Mustang power steering cap chrome plated cover slips over the existing original cap. Do NOT remove your original cap!


Make sure the engine is off and cool. Carefully clean and dry the original cap. Trial fit the cover over the original cap. If it is loose, we recommend you put a small piece of masking tape on the lip of the power steering cap, so it will stay secure. Check the chrome plated cover again for fit, as you want it to seat snug. If it is not snug, use a little more masking tape until tight. Once installed, the cover will stay in position.


To maintain appearance, simply use a water or a mild chrome polish on a 100% cotton cloth or micro cloth to clean or polish when necessary.


Continue Shopping