WIN $5,000 For Your Mustang! Enter Now
Talk to a Mustang Expert
1-888-332-7930
Mon-Thu 8:30a-11p, Fri-Sun 8:30a-9p

Free Shipping - Get it by Dec. 24th available on most items - Details

Smoked Rear Bumper Marker Tint (13-14 All)

Market Price $29.99 You Save 17% ($5.00)

$24.99 (pair)

FREE Shipping
  • Item 26323
In Stock Ships same business day. Choose options to add to cart

Features & Details

  • Sleek Stealthy Styling
  • Aggressive Smoked Appearance
  • Durable 5 Mil PVC Vinyl Tint
  • Optically Clear with a Gloss Finish
  • Protective Film Prevents Scratches During Installation
  • Pre-Cut for Easy Installation
  • Sold as a Set of Two
  • Fits All 2013-2014 Mustangs
Stealthy Styling. Now you can complete the stealthy styling of your Mustangs smoked brake lights with Smoked Rear Bumper Marker Tint Decals. These Smoked Tint decals apply over the two reflectors located on the lower portion of your Mustangs rear bumper.

Perfect Fit Guaranteed. AmericanMuscle Graphics vinyl designs have been test fit, refined, and tested again on our very own fleet of vehicles to assure a perfect fit every time.

Superior Quality Materials. AmericanMuscle Graphics uses only the highest grade of 5 mil cast vinyl tint available on today’s market. This 5 Mil thick lens tint is designed for lens tints. Compared to other products that were designed for window sign displays that are thinner. They also are not forgiving to install on the lights compound curve. The film is also breathable and self-healing polyvinyl film. The tint comes with 3 layers: protective layer, tint film layer, and backing layer. The protective layer protects the tint film during installation and is removed after installation. Our vinyl is rated for continual outdoor use without shrinking or degradation for up to 5 years. Thicker 5 mil vinyl remains flexible during installation to reduce the chances of wrinkling, yet still transmits 80% of light.

Impact Protection. AmericanMuscle Graphics 5 mil thick poly vinyl tint is breathable and features self-healing properties to provide good impact protection against stones, gravel and small road debris, all while still transmitting 80% of the light. A must for a daily driven vehicle.

Easier To Install. AmericanMuscle Graphics vinyl designs are not only pre-cut for a simpler installation, but our 5 mil smoked cast poly vinyl tint is extremely flexible allowing it to easily conform to complex compound curves without wrinkling and the clear permanent solvent polyacrylic adhesive backing will ensure that it stays securely in place. The tint comes with 3 layers: protective layer, tint film layer, and backing layer. The protective layer protects the tint film from scratches during the installation process and is removed when done.

Application. This pair of Smoked Tint Vinyl Decals are designed to fit all the 2013-2014 Mustangs, including the V6, GT and Shelby GT500 models. These decals match our smoked taillight and third brake light tint perfectly.

Fitment: 2013 2014 Details

What's in the Box
  • (1) Drivers Side Tint Decal
  • (1) Passenger Side Tint Decal
  • (1) Squeege
  • (1) AmericanMuscle Instructions
Installation Info
Will it fit my Mustang?
  • Boss 302 - 13
  • V6 - 13, 14
  • GT - 13, 14
  • GT500 - 13, 14

Most Helpful Reviews

5/5
Looks good

Recommend popping these out of the bumper cover to install. Just reach underneath, squeeze the tab, and they pop right out. Instructions are easy to follow and application was uneventful. Would recommend ...

Read More
Helpful (1)

5/5
Perfect

Couldn't wait to tint the lights out, after ordering it was delivered in 3 days and fit perfect. simply wiped the lenses with a damp towel, let dry and applied. took all of 3 minuets. and made it look ...

Read More
Helpful (1)

Overall Rating 4.6 out of 5 stars
Read All 35 Reviews

Customer Photos (13) Submit Your Photo

View All 13 Photos

You Might Also Like

1 Questions / 1 Answers

Ask a Question

Will this fit on the Roush Rear valance? The reflectors look the same but I'm not positive.

Jaqueezzzy

  • Hi, This Smoked Rear Bumper Marker Tint will work with the Roush Rear Valance because you still use the factory rear reflectors with that kit.

    Chris J

    Good Answer (0) (0)

Question Resolved

More Products You Might Like

Customer Reviews (35) Write a Review

Overall Rating 4.6

out of 5 stars

Installation Time:Less than 1 Hour

  • Fit 4.121212 4.1
  • Appearance 4.636364 4.6
  • Bang For Your Buck 4.333333 4.3



  • 3/5

    Installation Time: Less than 1 Hour

    September 10, 2015

    Doesn't fit perfectly

    There's at least a half inch that isn't covered by the tint. The install was easy but I might end up just taking it off anyways since it looks pretty bad.

    Nicknack

    Year: 2014 Submodel: GT Cedar Rapids

    Helpful (1) (0)

  • 4/5

    Installation Time: Less than 1 Hour

    July 30, 2015

    Rear Bumper Marker Tint

    I liked the way the pics looked so I decided to try the film. Install was a snap but the tint was shorter than the marker by almost 1/2 of an inch. I wound up centering the film as to not show as much of the marker as possible. The look would be great if it was a perfect fit. Maybe I got one of the sets that slipped through inspection.

    rod88

    Year: 2013 Submodel: GT Savannah, GA

    Helpful (1) (0)

  • 3/5

    Installation Time: Less than 1 Hour

    May 18, 2015

    Looks Good, Decent Fit

    Looks really nice, fit well with use of a heat gun and an exacto knife to get it just right.

    TravisR6

    Year: 2013 Submodel: GT Austintown, Ohio

    Helpful (1) (0)

  • 5/5

    Installation Time: Less than 1 Hour

    February 22, 2015

    Aggressive Look

    Love these! Super easy to install with a spray bottle. Just take your time and make sure it's lined up properly. Definitely makes the car look more aggressive!

    DaBigBone

    Year: 2014 Submodel: GT Plain City, OH

    Helpful (1) (0)

  • 4/5

    Installation Time: Less than 1 Hour

    September 07, 2014

    Looks good

    Really blacks out the rear end. Easy install. Little expensive for a couple of stickers. But I like the look over all

    Ddz77a

    Year: 2014 Submodel: V6 Indiana

    Helpful (1) (0)

  • 5/5

    Installation Time: Less than 1 Hour

    April 24, 2013

    Perfect

    Couldn't wait to tint the lights out, after ordering it was delivered in 3 days and fit perfect. simply wiped the lenses with a damp towel, let dry and applied. took all of 3 minuets. and made it look much different.

    Grabber14

    Year: 2014 Submodel: GT Long Island, New York, USA

    Helpful (1) (0)

  • 5/5

    Installation Time: Less than 1 Hour

    April 09, 2013

    Looks good

    Recommend popping these out of the bumper cover to install. Just reach underneath, squeeze the tab, and they pop right out. Instructions are easy to follow and application was uneventful. Would recommend to a friend.

    Fuzzy234

    Year: 2013 Submodel: GT Oregon

    Helpful (1) (0)

  • 5/5

    Installation Time: Less than 1 Hour

    March 24, 2013

    Good Quality tint.

    These rear bumper marker tint decals are good quality and do the job. I no longer have those bright red reflectors visible on the bumper. Looks nice.

    JETAG93

    Year: 2013 Submodel: GT Tomball, TX, USA

    Helpful (1) (0)

  • 5/5

    Installation Time: Less than 1 Hour

    January 19, 2013

    Rear Bumper Tint

    This is an easy install, just follow the instructions. This is not cheap film but thick vinyl tint that fits perfect. These really complete the blackout look!

    1BlueMustang

    Year: 2013 Submodel: V6 Missouri, USA

    Helpful (1) (1)

  • 5/5

    Installation Time: Less than 1 Hour

    March 03, 2013

    easy mode

    the instructions look way to hard....i got all the side and back and front light tints at once...then i followed the instructions to the T on the first one and then just started cleaning the light well and sticking it right on...not what they said to do...but it was way way way easier... and it worked out fine...the rest of the tint looks even better then the first one i put on following the instructions=))) they look good....fit well...cant complain

    natmill64

    Year: 2013 Submodel: V6 cali

    Helpful (0) (1)

  • 5/5

    August 26, 2016

    Smoked

    Smoked out all my lights. Easy to use and the final look is great!

    whosowever

    Year: 2014 Submodel: GT

    Helpful (0) (0)

  • 5/5

    July 13, 2016

    Easy mod

    What can I said this mod it's super easy and inexpensive. When you receive the smoke decal it's peel and stick I am so happy with the final product.

    13gt500

    Year: 2013 Submodel: GT500

    Helpful (0) (0)

  • 5/5

    Installation Time: Less than 1 Hour

    May 27, 2016

    nice

    Matches my black csr really well! Keeps the clean lines.

    hubba

    Year: 2014 Submodel: GT

    Helpful (0) (0)

  • 5/5

    Installation Time: Less than 1 Hour

    December 17, 2015

    Great Product

    It's a great inexpensive product that can change the appearance of your Mustang. Easy to intall just Water and soap.

    ghibenz

    Year: 2014 Submodel: V6 Texas

    Helpful (0) (0)

  • 5/5

    Installation Time: Less than 1 Hour

    November 15, 2015

    Great Product

    Easy install, just clean the area and apply to the area. I didn't need to warm it up like the instructions say. Little expensive for what you get, but otherwise awesome product!

    BukLau

    Year: 2014 Submodel: V6 Vancouver, BC, Canada

    Helpful (0) (0)

  • 5/5

    Installation Time: Less than 1 Hour

    January 19, 2015

    Great Simple Addition To Improve Your Stang's Look!

    Easy install...HUGE improvement in look. Definitely worth every penny...

    Cheech73

    Year: 2014 Submodel: GT Las Vegas, NV, USA

    Helpful (0) (0)

  • 5/5

    Installation Time: Less than 1 Hour

    December 17, 2014

    bumper tint

    Easy to install, barely covers the reflector but gives my black Mustang a slick look.....really great.

    jnh1

    Year: 2014 Submodel: V6 Ventura California

    Helpful (0) (0)

  • 5/5

    Installation Time: Less than 1 Hour

    September 09, 2014

    Great product very easy to install

    This along with the third brake light make the car look amazing.

    AXS8336

    Year: 2014 Submodel: GT Houston, TX, USA

    Helpful (0) (0)

  • 5/5

    Installation Time: Less than 1 Hour

    July 14, 2014

    Last but not least...

    Make sure you include these tint covers are purchased with the rest of the light tints. Can be somewhat of an after thought, and it was the last of lights I tinted, but a necessity nevertheless! Stealthiness made easy!

    DCv6

    Year: 2014 Submodel: V6 Northern VA

    Helpful (0) (0)

  • 5/5

    Installation Time: Less than 1 Hour

    June 28, 2014

    Clean look

    Really goes well with any mustang. Take your time on install don't rush or you will tear it.

    Ryan266

    Year: 2013 Submodel: GT

    Helpful (0) (0)

Related Mustang Categories