Talk to a F-150 Sales Tech
1-888-706-1096
M-F 8:30A-11P, Sat-Sun 8:30A-9P
$12k Summer Sweepstakes! Enter Daily>

Airaid Cold Air Dam Intake with Red SynthaFlow Oiled Filter (09-10 5.4L F-150, Excluding Raptor)

Item T527268-A
Airaid Cold Air Dam Intake with Red SynthaFlow Oiled Filter (09-10 5.4L F-150, Excluding Raptor)
Verify parts fit and get product recommendations.
F-150 Sales Techs: Connect Now M-F 8:30A-11P, Sat-Sun 8:30A-9P
$0.00
Our Price

$399.99

FREE Shipping Market Price $443.99 You Save 10% ($44.00) Up to 10% off for Military & First Responders! See Details

Will this fit your Vehicle?

Select a different vehicle Help?
Update or Change Vehicle
Out of Stock

Ship to: Columbus - 43215
Sorry, please enter a valid US or CA postal code
We're sorry, zip can't be updated at this time.
Recommended Install Shops
How It Works
Install Shops are available near Columbus - 43215

Add Installation From:

Wards Auto Repair LLC
551 Corbett Rd, Groveport, OH
11.21 miles away . 25 Reviews
*Specific shop subject to availability
Total cost of service $175.00
    Create a list
    Add to New List

    Saved - View your saved items

    We're sorry. We couldn't save this product at this time.

    or use

      Product Information

      Features, Description, Reviews, Q&A, Specs & Installation

      Features & Specs

      • Improves Horsepower and Acceleration
      • Black Intake Tube
      • Oiled - SynthaFlow Filter Included
      • No Computer Re-Tune Required
      • Washable and Reusable Filter
      • CARB EO Number: D-609-18
      • Fits 2009-2010 5.4L F-150s, Excluding Raptor

      Description

      A Ferocious Truck. Breathe new life into your truck literally with this Airaid Cold Air Dam intake. It draws more fresh air into the engine that's colder and more rich with oxygen. This lets the engine burn more powerfully and gives you more horsepower to work with when driving around. The result is a truck with more life that can tow with added strength. This simple intake enhancement is much more efficient than the built in filter and intake setup.

      A Tune isn't Necessary. With many air intake sets you must tune your truck in order to get them to function properly or safely. That's not so with this set from Airaid. Instead you can use the standard tuned engine with good results. If you are looking for another way to enhance your ride and get the most power out of it you could tune your truck and still use the enhanced intake system.

      Highly Effective. The full-features air filter in this intake takes out particles as small as 2 microns in size. It does it with oil soaked cotton that grabs the little tiny molecules as they pass by. The filter features a bunch of layers of cloth packaged neatly into a little space. It's washable and you can easily clean up the filter to use it again and again for longevity, you just need to add oil afterward.

      Plastic and Stainless Steel. This Airaid Cold Air Dam intake is made up mostly of plastic and stainless steel. Polyethylene is used to make the housing of the intake as well as the intake pipe. Stainless steel clamps help hold the intake tube in place and stainless steel hardware holds everythig in position. The ends of this intake are formed from plastic, and the whole unit stands up to hard use capably thanks to its tough design.

      Install Quick. Like most other Airaid intakes, this one goes on in around an hour. You can put it into position and then lock it in place using the included hardware. Forget about special installation procedures or tuning, this doesn't require any of that.

      Lifetime Protection. Airaid offers a lifetime limited warranty on this intake system so it is protected long term.

      Legal Everywhere. No matter what state you live in, this intake is legal to use thanks to Carb EO # D-609-18. certification. It benefits from clean design and offers excellent performance overall.

      Application. This Airaid Cold Air Dam Intake with a SynthaFlow Oiled Filter is specifically designed to fit on the 2009-2010 F-150s powered by the 5.4L engine. It is not compatible with the 5.4L Raptor.

      Note: Coupon codes cannot be applied to this product.

      Shop All Truck Parts And Accessories

      Shop All Cold Air Intakes For Trucks

      Fitment:

      Details

      Airaid AIR-400-231

      CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

      Installation & What's in the Box

      Installation Info

      What's in the Box

      • (1) Air Filter
      • (1) Intake Tube
      • (1) Front Panel
      • (1) Rear Panel
      • (1) Extension Panel
      • (1) Silicone Reducer Coupler
      • (1) Silicone Hump Hose
      • (1) 23" Weather Strip
      • (9) 6-32 x 5/16" Screws
      • (9) 6-32 Keps Nuts
      • (9) #6 Flat Washers
      • (2) 8-32 x 3/8" Button Head Screws
      • (1) #52 Hose Clamp
      • (3) #64 Hose Clamps
      • (1) T-20 Torx Driver

      4.5

      Customer Reviews (31)

        Questions & Answers

        10 More Questions

        Will It Fit My F-150

            Related F-150 Categories