Win $5,000 For Your F-150! Enter Now!
Talk to an F-150 Expert
1-888-332-7930
Mon - Sun, 8:30 AM EST - 11:00 PM EST

Free Shipping On Orders Over $49. Details

Barricade 3 in. Bull Bar w/ Skid Plate - Polished SS (11-17 2.7L/3.5L EcoBoost, Excluding Raptor)

Market Price $179.99 You Save 11% ($20.00)
Starting At

$159.99 (each)

FREE Shipping
  • Item T102849-B
  • MPN# T102849-B

Will this fit your F-150?

Features, Video & Details

  • Provides Front-End Protection
  • Heavy Duty 3 in. Steel Tubing
  • Bright Polished Finish
  • Easy, No Drill Installation; Some Cutting May Be Required
  • 3 Year Limited Warranty
  • Fits 2011-2017 2.7L/3.5L EcoBoost F-150s, excluding Raptor

Review & Installation Video

Review & Install Video

Extra Protection. The Barricade Off-Road Polished Stainless Steel Bull Bar provides a dependable front-end protection from brush and road hazards, even on the toughest trails.

Heavy Duty Construction. Manufactured from 3 in. diameter steel tubing, this Barricade Off-Road Bull Bar is completed in a bright polished chrome finish for intimidating good looks and long lasting corrosion resistance.

Easy, Bolt-on Installation. The Barricade Off-Road Front Tubular Bull Bar is engineered to be a direct bolt-on upgrade using just basic hand tools. There is no drilling required for a clean straight forward installation. All hardware is included for installation making it an easy process. F-150s that are not equipped with tow hooks will require some cutting to the factory plastic lower bumper cover.

Application. This Barricade Off-Road Polished Stainless Steel Bull Bar is specifically designed for use on the 2011 to 2017 F-150s equipped with the 2.7L or 3.5L EcoBoost V6 engine. It is not compatible on Raptor models.

Fitment: 2011 2012 2013 2014 2015 2016 2017 Details

What's in the Box
  • (1) Bull Bar
  • (1) Driver/Left Side Mounting Bracket
  • (1) Passenger/Right Side Mounting Bracket
  • (4) 12mm x 40mm Bolt Plates
  • (8) 12mm Lock Washers
  • (4) 12-1.75mm x 35mm Hex Bolts
  • (8) 12mm x 32mm OD x 3mm Large Flat Washers
  • (4) 12mm x 24mm OD x 2.5mm Flat Washers
  • (8) 12mm Hex Nuts
Installation Info
Will it fit my F-150?

Most Helpful Reviews

5/5
3" Barricade Bull Bar

I have a 2014 Ford F-150 XLT Supercrew with Ecoboost. Product arrived on time. My truck had the factory installed tow hooks. It was very easy to install, took about 40 minutes. Would have been sooner but ...

Read More
Helpful (1)

5/5
Good quality bull bar

Very easy to install and looks great. I like that it had holes ready to mount lights to.

Helpful (1)

Overall Rating 4.8 out of 5 stars
Read All 23 Reviews

Customer Photos (9) Submit Your Photo

View All 9 Photos

You Might Also Like

7 Questions / 5 Answers

Ask a Question

Why wouldn't this fit a 2009-2010?

LV

  • The Barricade 3 in. Bull Bar w/ Skid Plate - Polished SS is specifically designed for the 11-17. We do offer the Barricade 3.5 in. Bull Bar - Polished Stainless for 09-14 F150 I have provided a link below for the proper fitment. If you have any other questions please feel free to chat or call in. https://www.americanmuscle.com/barricade-35in-bullbar-ss-0915.html

    Pat K

Helpful (0)

Will this interfere with the front camera 360 operation?

RickeyP

will this fit on the 5.0L f150?

AnthonyH

  • Hello! The Barricade 3 in. Bull Bar w/ Skid Plate will not fit on a 5.0L F150

    VincentV

Helpful (0)

how heavy is this bull bar?

Anonymous

  • This bullbar will weigh 25 pounds.

    KevinD92

Helpful (0)

Does this bull bar have a site where you could mount a license plate relocator?

Anonymous

  • This Barricade 3 in. Bull Bar w/ Skid Plate has two welded in tabs, which could be used to relocate a license plate with the proper bracket.

    AMJEFF

Helpful (0)

Does this model (polished Stainless) have the mounts for lights? They can be seen in the black model but hard to tell from the pictures for this model.

thsearfoss

  • Yes, this bull bar has 2 mounts that is welded on the bull bar so you can install some auxiliary lights.

    AMMatt

Helpful (0)

More Products You Might Like

Customer Reviews (23) Write a Review

Overall Rating 4.8

out of 5 stars

Installation Time:Afternoon

Installation Cost:$100-$250

  • Protection 4.428571 4.4
  • Fit 4.809524 4.8
  • Appearance 4.904762 4.9
  • Bang For Your Buck 4.857143 4.9



  • 5/5

    Installation Time: Less than 1 Hour

    July 06, 2017

    3" Barricade Bull Bar

    I have a 2014 Ford F-150 XLT Supercrew with Ecoboost. Product arrived on time. My truck had the factory installed tow hooks. It was very easy to install, took about 40 minutes. Would have been sooner but it was hot as heck that day.

    MichaelK

    Year: 2014 Submodel: 3.5L V6 EcoBoost XLT

    Helpful (1)

  • 4/5

    Installation Time: Less than 1 Hour

    May 16, 2017

    Great bull bar

    Great bull bar looks really good on my truck , giving it 4 stars because upon arrival it showed up with a couple dents in it already

    ClydeM

    Year: 2014

    Helpful (1)

  • 5/5

    Installation Time: Less than 1 Hour

    May 10, 2017

    Good quality bull bar

    Very easy to install and looks great. I like that it had holes ready to mount lights to.

    JeffT

    Year: 2014 Submodel: 3.5L V6 EcoBoost FX4

    Helpful (1)

  • 5/5

    Installation Time: Less than 1 Hour

    March 31, 2017

    Great!

    Fairly simple install. Having a buddy definitely helps. The finish looks really nice with the chrome face of the truck and adds a little aggressive look. Awesome so far!

    CKitko

    Year: 2011

    Helpful (1)

  • 5/5

    Installation Time: Less than 1 Hour

    November 04, 2016

    Great bar!

    I have a 2016 magnetic fx4, that needed something to break up the colour scheme of the truck. This bar looks great, was easy to install, is great quality, and offers piece of mind with the proper ventilation for the Ecoboost engine. I live in Canada, and even with the cost of shipping it was significantly better deal then anything I could buy locally.

    Riggs79

    Year: 2016 Submodel: 3.5L V6 EcoBoost FX4

    Helpful (1)

  • 5/5

    September 22, 2016

    Great Fit for Non-Ecoboost Too

    I have a 2013 F150 XLT with the 5.0L V8. I was shopping for a bull bar for my truck to dress it up a bit and install off-road lights. I found this Barracade Bull Bar and it fit the bill. I had never seen a bull bar specifically designed for the ecoboost until now. The cross bar is lower than the standard bull bars therefore it did not block my lower grille allowing me to keep my license plate front and center or installing a 20" light bar there. The installation was extremely easy even by myself. I took my sweet time to get it perfect and 45 minutes later I'm done. The fit and finish are tops and looks awesome. It worked out as I intended. I later installed a 22" light bar on the mounting pads and relocated the license plate onto the skid plate. I didn't have to buy the relocation kit just bought some stainless steel bolts, lock nuts, and fender washers. I am completely satisfied with the outcome of this mod and receive lots of compliments on the Barracade.

    Scorpion

    Year: 2013 Submodel: 5.0L V8 XLT

    Helpful (1)

  • 5/5

    Installation Time: Afternoon

    June 14, 2016

    Good stuff

    I easy install and all parts fit no problem. Took less than 3 hrs. Would definitely recommend product.

    MrTSchwank

    Year: 2013 Submodel: XLT

    Helpful (1)

  • 5/5

    Installation Time: Less than 1 Hour

    June 05, 2016

    Bull bar

    Turned out better then expected! Easy installation and didn't need 2 cut anything! Bolted right in! Very impressed! Wish I got a sticker with purchase!

    Randeeze

    Year: 2011 Submodel: XLT

    Helpful (1)

  • 5/5

    Installation Time: Afternoon

    May 30, 2016

    Stainless Barricade bull bar 09-14

    Well the product is great.Looks good! Great price.Took a little bit to cut out bumper for hook up.

    BigD

    Year: 2011 Submodel: XLT

    Helpful (1)

  • 4/5

    Installation Time: Afternoon

    January 14, 2016

    Must remove tow hooks!!!

    This bull bar fits great and looks amazing. However, no where in the description does it say you won't be able to keep your tow hooks. But after a half a days work it is possible to mount this bull bar and keep your tow hooks. And a little cutting and modifications to the bumper. Still looks pretty darn cool.

    66Mustang

    Year: 2013 Submodel: XLT NC

    Helpful (1)

  • 4/5

    Installation Time: Shop Install

    Installation Cost: $100-$250

    September 20, 2017

    2017 Ford F150 XLT Supercab

    Nice product had a local body shop install for me took them about 2 1/2 hours to install. Adds something to the front of my 2017 F150 XLT

    JDP

    Year: 2017 Submodel: 2.7L V6 EcoBoost XLT

    Helpful (0)

  • 4/5

    Installation Time: Afternoon

    September 20, 2017

    Bull bar

    Nice product, good fit and appearance. Install wasn't bad at all.

    GeneJ

    Year: 2016 Submodel: 3.5L V6 EcoBoost XLT

    Helpful (0)

  • 5/5

    Installation Time: Less than 1 Hour

    August 04, 2017

    Bull Bar

    Great product!! Easy to install and looks great!! I installed this as a surprise on my wife's 2013 F150 and she absolutely loves it!

    AcieK

    Year: 2013

    Helpful (0)

  • 5/5

    Installation Time: Less than 1 Hour

    July 14, 2017

    Awesome product

    Very impressed with the look and quality of this Bull Bar. I highly recommend this product. Great price!

    GeorgeO

    Year: 2014

    Helpful (0)

  • 4/5

    Installation Time: Less than 1 Hour

    June 29, 2017

    Barricade Bull bar

    It is a good bull bar it looks good and it works good at it is well priced the only thing I don't like is that it makes you delete the factory front tow hooks!

    Ryan

    Year: 2012 Submodel: 3.5L V6 EcoBoost Lariat

    Helpful (0)

  • 5/5

    Installation Time: Afternoon

    June 26, 2017

    Easy install, looks great.

    This Barricade Bull Bar gives my truck a nice, mean look. It was very easy to install and very well made.

    ErikK

    Year: 2015 Submodel: 3.5L V6 EcoBoost XLT

    Helpful (0)

  • 5/5

    Installation Time: Shop Install

    Installation Cost: 0-$100

    May 25, 2017

    Love The Chrome

    Our F150 has a chrome grille and adding the chrome bull bar adds an extra nice look to the front. My wife is happy that the Dog plate we have on the front can still be read with it installed. The order process was great and it showed up on time. I had my cousin in-law install it and he only charged me $60.

    DavidW

    Year: 2017 Submodel: 3.5L V6 EcoBoost Lariat

    Helpful (0)

  • 5/5

    Installation Time: Less than 1 Hour

    April 05, 2017

    Nice bull bar

    It is very easy to install. Really makes the truck look really good. Going to install a pair of led fog lamps on bar also. Already has two pre drilled holes on bull bar. Makes it easy.

    DerekE

    Year: 2012

    Helpful (0)

  • 5/5

    Installation Time: Less than 1 Hour

    April 03, 2017

    Easy install.

    Installs in less than 1 hour. Great product. Price is very competitive.

    Mark

    Year: 2011

    Helpful (0)

  • 5/5

    Installation Time: Less than 1 Hour

    January 05, 2017

    Great Product!

    This fit my truck perfectly! It also only took a short amount of time to install!

    Mandi

    Year: 2013

    Helpful (0)

Related F-150 Categories