Talk to a F-150 Sales Tech
1-888-706-1096
M-F 8:30A-11P, Sat-Sun 8:30A-9P
$20K Sweeps! 10 Chances to Win! Enter Daily >

How to Install Iron Cross Patriot Board Side Steps - Polished Stainless on your F-150

Shop Parts in this Guide

Step 1: Reference picture of bracket positions for later steps (Fig I &2)



Step 2: Install brackets on factory 8 MM threaded studs as shown in Fig l &2. Hand tighten hardware at this time.

* Note: For Regular and Extended Cab, use only 2 Middle/Rear brackets.


Step 3: Now with everything installed. Take a look at the board on your vehicle. There is a lot of adjustment in the kit to get the board where you like them. Adjust boards in and out and side to side with the slots on the bracket where board mounts. Adjust the front and rear brackets first and finish with the middle. Once the boards are in place to your liking, tighten all fasteners on the boards and brackets. This will complete your installation. Enjoy!