Talk to a Mustang Expert
Mon-Thu 8:30a-11p, Fri-Sun 9a-7:30p

Free Shipping on Everything. Seriously. Details

How to Install Modern Billet Chrome Shifter Handle Covers on your Automatic 2005-2009 Mustang

Installation Time

15 minutes

Tools Required
  • 1.5mm Allen Wrench
American Muscle
Shop Parts in this Guide

Installation Instructions:

1. Proceed to cleaned shifter of any dirt or grim with a cleaning wipe or damp paper towel prior to installation.

2. Remove chrome billet covers from packaging.

3. Loosen set screws counter clock wise before installation using a 1.5 mm allen wrench.

4. Place chrome billet cover on to shifter.

5. Align set screws to facing down in the six o’clock position.

6. Pressing firmly on the cover while in place tighten set screw using 1.5mm allen wrench.

7. Proceed to install second cover on opposite side using the same method.

8. Ensure both set screws are flush and tight in place.

Installation Instructions Written By AmericanMuscle Customer Ryan Maguire 1/29/2014

This guide applies to Vehicle years: 2005, 2006, 2007, 2008, 2009 and Submodels: Bullitt, V6, GT, GT500