How to Install a Modern Billet Chrome Headlight Knob Cover on Your 2005-2014 Mustang

Hardware included in the box:

 Alcohol prep pad
 Headlight knob cover with 3M tape

Installation procedure:

1. Safety first! Make sure engine is turned off and vehicle is safely parked. Locate headlight knob on the left hand side of steering wheel.

2. Use alcohol pad provided to clean the factory headlight knob prior to installation.

3. Before removing 3M tape backing, pre fit the chrome knob cover on your factory knob for proper alignment. Make sure the headlight knob is pointed towards the off position.

4. Slowly remove 3M backing.

5. Place chrome knob cover over existing headlight knob. Gently press on the circular edge and hold in place for about 15-30 seconds. 3M tape will adhere right away. Once installed the headlight knob can be used right away.

Installation Instructions written by AmericanMuscle Customer Allen Syed 05.27.2014