WIN $5,000 For Your Mustang! Enter Now
Talk to a Mustang Expert
1-888-332-7930
Mon-Thu 8:30a-11p, Fri-Sun 8:30a-9p

Free Shipping - Get it by Dec. 24th available on most items - Details

Smoked Fog Light Tint (05-12 GT)

Market Price $33.99 You Save 12% ($4.00)

$29.99 (pair)

FREE Shipping
  • Item 26180
In Stock Ships same business day. Choose options to add to cart

Features, Video & Details

  • Sleek Stealthy Styling
  • Aggressive Smoked Appearance
  • Durable 12 Mill PVC Vinyl Tint
  • Optically Transparent with a Gloss Finish
  • Provides Additional Impact Protection
  • Pre-Cut for Easy Installation
  • Allows Fog Lights to Shine Through
  • Sold as a Set of Two
  • Fits All 2005-2012 GT Mustangs

Review & Installation Video

Review & Install Video

Hey I’m Justin with AmericanMuscle.com, here with an easy and inexpensive way to smoke the fog lights on any 2005 and up Mustang, thanks to our AmericanMuscle Graphics tint. This vinyl is going to perfect for those of you who want to try to complete that blackout look or if you just want to completely change up the look of your GT, without forking over money for a new grille, or a new set of fog lights. All of our AmericanMuscle Graphics are designed and produced right here in house using the highest quality premium cast vinyl that’ll last for years to come. All of their designs are then tested first on our very own cars so by the time it arrives to you they fit perfectly every time. Getting the vinyl installed on your GT is very easy and only requires a spray bottle filled with a little soap and water, and the included squeegee. You’ll first want to spray the back side of the vinyl very lightly and then position it into place over your fog light. Use that squeegee to remove any excess bubbles, and then leave your car in the sun for a few hours just to let everything dry. This entire process should take you no more than a half hour. So if you’re looking to take your GT to the dark side, or if you just want to experiment a little bit with the looks of your factory grille, then you’ll definitely want to check out this smoked tint from AmericanMuscle Graphics.

Stealthy Styling. Now you can complete the stealthy styling of your Mustangs smoked headlights with Smoked Fog Light Tint from AmericanMuscle. This Smoked Tint will give your Pony sleek stealthy styling that looks great on both the street and the strip.

Perfect Fit Guaranteed. AmericanMuscle Graphics pre-cut vinyl designs have been test fit, refined, and tested again on our very own fleet of vehicles to assure an easy installation and a perfect professional fit every time.

Pre-cut Vinyl Tint. These Fog Light decals are precision cut from durable dark smoked vinyl for a perfect fit and impressive good looks.

Superior Quality Materials. AmericanMuscle Graphics uses only the highest grade of cast vinyl tint available on today’s market. This 12 Mil thick lens tint is designed for lens tints. Compared to other products that were designed for window sign displays that are generally around 3 mil in thickness. They also are not forgiving to install on the lights compound curve. The material type and the 12 mil thickness provides superior impact protection. The film is also breathable and self-healing polyvinyl film. Our vinyl is rated for continual outdoor use without shrinking or degradation.

Impact Protection. AmericanMuscle Graphics 12 mil thick poly vinyl tint is breathable and features self-healing properties to provide superior impact protection against stones, gravel and small road debris. A must for a daily driven vehicle.

Easier To Install. AmericanMuscle Graphics vinyl designs are not only pre-cut for a simpler installation, but our 12 mil smoked cast poly vinyl tint is extremely pliable allowing it to easily conform to complex compound curves without curling back and the clear permanent solvent polyacrylic adhesive backing will ensure that it stays securely in place.

Application. This high quality AmericanMuscle Graphics Smoked Fog Light Tint is specifically designed to fit the 2005 to 2012 GT Mustangs equipped with the factory fog lights. This set of two Smoked Fog Light Light Tint decals match our Smoked Tail Light, Third Brake Light, and Quarter Marker Light tint perfectly.

Fitment: 2005 2006 2007 2008 2009 2010 2011 2012 Details

What's in the Box
  • (2) Fog Light Tint
    Tools included:
  • (1) Squeege
Installation Info
Will it fit my Mustang?
  • GT - 05, 06, 07, 08, 09, 10, 11, 12

Most Helpful Reviews

4/5
Excellent for hidden fog light kits.

I bought this tint for a set of GT fog lights I installed hidden behind my grille. The tint does a beautiful job at hiding them and it was very easy to install (with the right tools). The only reason ...

Read More
Helpful (7)

5/5
Black Betty Boop

It added a kind of look to my car that it needed. Black on Black makes my Pony shine! Cant wait till i smoke out all the lights. I think she likes it.

Helpful (6)

Overall Rating 4.4 out of 5 stars
Read All 37 Reviews

Customer Photos (45) Submit Your Photo

View All 45 Photos

You Might Also Like

4 Questions / 11 Answers

Ask a Question

Will this tint work with my Elenor style foglight set up? I bought in the past the fog light covers from American Muscle but had to return them because they were slightly bigger then my fog lights. I'm wondering if the same problem will happen here

ITSvinn

  • Yes, These will fit any GT sized fog lights, the Eleanor configuration carries the same dimensions just in a different location. Will work fine!

    chriscarr86

    Good Answer (0) (0)

Show 1 more answer Answer This Question I need this answered (0) (0)

How permanent are these? I want a fully black grill but didn't want to give up by fog lights, these seem like a great option but I was wondering if they are easily removed if I don't like the application. How are they adhered?

Nario64

  • its the same as window tint, lasts just as long.

    Eedd

    Good Answer (0) (0)

Show 2 more answers Question Resolved

Black out fog lamp covers I wonder how much the lights are dimmed by this application. I live in the country and need my fog lamps to see the peripheral area around the car.

GaryD

  • Not much at all actually. For as thick and as dark as this film is I was pleasantly surprised as to how little they dimmed my foglights. I have the black out headlight covers as well and now my foglights are actually brighter than my headlights

    Toddiesel

    Good Answer (2) (0)

Show 3 more answers Question Resolved

Would the halo of the raxiom fog lights shine through? I have the clear lens raxiom halo off lights from this sight and was wondering if this tint would make the halo to dim?

Hayden15

  • Yes it will be dimmer but still very visible

    SovietRyan17

    Good Answer (0) (0)

Show 1 more answer Answer This Question I need this answered (0) (0)

More Products You Might Like

Customer Reviews (37) Write a Review

Overall Rating 4.4

out of 5 stars

Installation Time:Less than 1 Hour

  • Fit 4.542857 4.5
  • Appearance 4.542857 4.5
  • Bang For Your Buck 4.2 4.2



  • 4/5

    Installation Time: Less than 1 Hour

    April 26, 2012

    Excellent for hidden fog light kits.

    I bought this tint for a set of GT fog lights I installed hidden behind my grille. The tint does a beautiful job at hiding them and it was very easy to install (with the right tools). The only reason I rated this 4 star is purely on price. There are a lot of places out there that sell complete headlight tint kits that come with the fog light tints, at a cheaper rate... but being a loyal AM customer... I paid more, for less. But I am still very glad I purchased them.

    IanR

    Year: 2011 Submodel: V6 Miami

    Helpful (7) (0)

  • 5/5

    Installation Time: Less than 1 Hour

    February 24, 2012

    Black Betty Boop

    It added a kind of look to my car that it needed. Black on Black makes my Pony shine! Cant wait till i smoke out all the lights. I think she likes it.

    Jones

    Year: 2012 Submodel: GT Chicago

    Helpful (6) (0)

  • 3/5

    Installation Time: Less than 1 Hour

    September 08, 2015

    Bubbles

    The tint should be at least an eighth of an inch bigger. If you look at an angle you can see the clear sides of the fog lights. The tint may cover the light entirely if you line it up and apply it perfectly but it is a little difficult to do with the lights and grill still on the car. As mentioned by others this is a little overpriced. Another issue is that after applying it perfectly with no bubbles I noticed bubbles the next day. I popped the bubbles with a needle and smoothed it out. Checked it two weeks later and noticed three more bubbles. It still looks good from a distance as long as you're not up close inspecting it.

    madmax

    Year: 2011 Submodel: GT Maryland

    Helpful (1) (0)

  • 5/5

    Installation Time: Less than 1 Hour

    May 14, 2015

    Smoked headlight covers

    Looks awesome! Easy to install, only took me about 15 minutes to do both headlights. Seems very durable, have been through the laser wash with no problems. Cant really tell a difference in the brightness of my headlight.

    Alan1993

    Year: 2012 Submodel: GT

    Helpful (1) (0)

  • 5/5

    Installation Time: Less than 1 Hour

    December 06, 2012

    Excellent darkness with minimal impact on lighting

    These are great. The fit is exact and the film is super thick and durable and blacks out your fog lights very well, but doesn't dim them much at all. Wish they made this film for the headlights! As a note, you're going to want to take off your grill to put these in. I discovered that the hard way.

    Toddiesel

    Year: 2013 Submodel: GT Charleston, SC, USA

    Helpful (2) (1)

  • 1/5

    Installation Time: Less than 1 Hour

    May 21, 2012

    Looks good from a distance

    I love AM products, however I didn't have good luck with these. After installing the tint film exactly as instructed, air bubbles formed hours after it dried.

    Lisa2012

    Year: 2012 Submodel: GT Maryland

    Helpful (1) (0)

    • Response from AmericanMuscle

      I'd recommend waiting a few days and then using a small pin to pop any remaining air bubbles. Being in the sun a few days and using the pin method should fix the problem. If you still have any issues after giving that a shot, please give us a call!

      Lisa , Customer Care

  • 1/5

    Installation Time: Less than 1 Hour

    July 08, 2015

    Looks good, very dark.

    Installed as per instructions with package as they are different than AM install video. AM shows using squirt bottle with soap and getting vinyl wet but manufacturer shows water only on fog lamp. I took my time and still have bubbles in vinyl. I also installed the headlamp covers at the same time but those were the smoked plastic. The vinyl fog lamp covers are not as dark as the plastic headlamp covers. Vinyl fog lamp covers are not as dark when comparing during daylight up close but from a greater distance not as noticeable. Wife likes it or I would remove as they look cheap.

    AZDA

    Year: 2008 Submodel: GT Illinois

    Helpful (0) (1)

  • 5/5

    Installation Time: Less than 1 Hour

    May 21, 2012

    Fog light tint.

    Excellent quality product, not some flimsy film that you would see elsewhere. Installation was quite simple, and honestly changed the look of the front end. Highly recommend

    Mike10GT

    Year: 2010 Submodel: GT Buffalo, NY, USA

    Helpful (0) (1)

  • 5/5

    Installation Time: Less than 1 Hour

    March 16, 2012

    Sweet look

    You don't even need to take off much of the grill to install these if you use soapy water. Use a plastic card or squeegee to get the water out when you have it placed. Then turn the fog lights on for several minutes to dry it out and finish squeezing out the water. Great look when they're off and the light is just a bit dimmer when they are turned on.

    RichB

    Year: 2011 Submodel: GT Seattle, WA

    Helpful (0) (1)

  • 5/5

    Installation Time: Less than 1 Hour

    July 27, 2012

    Frick'n Awesome

    They look awesome, fit great, simple straight forward instructions and easy install. Great quality and looks even better in person. If you are even considering these tail lights, just do. You will not be disappointed.

    LadyRoush

    Year: 2006 Submodel: Other North Carolina, USA

    Helpful (0) (4)

  • 4/5

    August 18, 2016

    Fog light tint

    Received the tint in a timely fashion..was surprised to find the material to be be so thick..with the adhesive backing care must be taken when applying to the light..the adhesive sticks immediately..left some air/water pockets but directions state they will disappear over time..waiting..looks good!

    higgitho

    Year: 2010 Submodel: GT

    Helpful (0) (0)

  • 5/5

    August 10, 2016

    Smoked Fog Light Tint

    Great price easy to install looks great went good with my smoked headlights

    speedy

    Year: 2005 Submodel: GT

    Helpful (0) (0)

  • 5/5

    Installation Time: Less than 1 Hour

    June 28, 2016

    EASY AND AWESOME

    Price is good. Installation is easy (follow instructions provided). And they look awesome.

    09gt

    Year: 2009 Submodel: GT

    Helpful (0) (0)

  • 1/5

    Installation Time: Afternoon

    June 17, 2016

    Not pre-cut for 2010 Mustang GT - Very Unsatisfied with my first Americanmuscle.com experience

    As it was stated in the description of this product, these were made pre-cut for "easy" installation with no reference to actually having to remove the fog light entirely to install. Look into making pre-cut vinyl, otherwise you have to use a knife to trim the vinyl to the correct size. I bought these for easy installation, that was the point. If I wanted to cut and mold then myself I would have simply bought a sheet of smoked vinyl. This was a joke. Very unsatisfied.

    Came8515

    Year: 2010 Submodel: GT

    Helpful (0) (0)

  • 3/5

    Installation Time: Less than 1 Hour

    June 16, 2016

    Buy the Covers or Fogged Headlamps

    The stick on tint was just ok. It was not as dark as I had hoped. Ended up taking them off. Pulling them off was a pain although they did come off clean and in one piece. For a few bucks more, buy the covers and give yourself the option of cruising with fogged lights.

    Joethv8

    Year: 2008 Submodel: GT

    Helpful (0) (0)

  • 5/5

    Installation Time: Less than 1 Hour

    June 14, 2016

    Smoked Fog Light Tint

    These were very easy to install. They look great! For anyone looking to tint their fog lights this is a great product.

    Stang

    Year: 2011 Submodel: GT

    Helpful (0) (0)

  • 4/5

    Installation Time: Less than 1 Hour

    December 31, 2015

    Good but can be better

    This fog light tint is a lot better than the stock fog lights don't get me wrong but it leaves a bit of a yellow fade after putting on. If I could go back I would probably get the covers but I don't use my fog lights so I don't need the light. If you frequently use your fog lights I would say get this tint

    Mitch

    Year: 2009 Submodel: GT Atlanta, GA

    Helpful (0) (0)

  • 5/5

    Installation Time: Less than 1 Hour

    December 25, 2014

    Excellent Quality and Looks

    High quality tint, install is simple via the provided directions. Gives my car a nice stealth look now. I installed them into an Eleanor Grille, fitment is perfect.

    patrickN

    Year: 2006 Submodel: GT Maui, HI, USA

    Helpful (0) (0)

  • 5/5

    Installation Time: Less than 1 Hour

    November 10, 2014

    Easy install well worth the price

    Awesome look for the car. Makes a drastic change to the exterior for a low price.

    Gabe90

    Year: 2011 Submodel: GT Arkansas

    Helpful (0) (0)

  • 5/5

    Installation Time: Less than 1 Hour

    May 02, 2014

    awesome part

    this gave me the full black out look for the lights on the car

    icampbell01

    Year: 2006 Submodel: GT

    Helpful (0) (0)

Related Mustang Categories