This Mustang Parts Installation Guide Works For
Installation Time: 2 Hours
Steeda Part #'s 555-3328 & 555-3331
This pulley is designed to press onto the supercharger shaft, as is the OEM pulley. Special tools are required both .to remoe the onglnal pulley and to Install the new pulley. Improper installation will result In damae to both the supercharger and the pulley. We highly recommend this product to be Installed by a skilled professional utilizing the proper tools. Call Steed a at 954-960-0774 for additional information about installation tools.
The replacement of the press-on supercharger pulley for the Ford series superchargers (Cobra, GT500, Lightning and Harley-Davidson trucks) is a simple procedure, but does require that the engine be completely cooled down before removal of the existing pulley or installation of the replacement pulley. It's also required that the pulley be baked in an oven at 400 for 35-45 minutes to ease in installation, or heat the pulley with a propane torch for 1-1/2 minutes 50 a glove is required for install. It is recommended that you execute the removal and replacement of the pulley(s) using the additional procedures that follow. In addition, take a measurement from the blower to the first belt groove in order to ensure proper alignment of the Steeda pulley.
Then with the engine at room temperature, heat the replacement pulley in an oven at 4000 for 30-45 minutes prior to installation. Use leather gloves to handle the hot pulley to prevent burns to your hands or other plastic components and painted Items. Install the pulley immediately after removing it from the oven.
Following the above additional steps will insure a hassle free installation and many miles of enjoyment.