Talk to a F-150 Sales Tech
1-888-706-1096
M-F 8:30A-11P, Sat-Sun 8:30A-9P
$20K Sweeps! 10 Chances to Win! Enter Daily >

K&N Series 77 High Flow Performance Cold Air Intake with Coolant Reservoir; Black (10-14 6.2L F-150 Raptor)

Item T527667
Verify parts fit and get product recommendations.
F-150 Sales Techs: Connect Now M-F 8:30A-11P, Sat-Sun 8:30A-9P
$0.00
On Sale

$349.99 (each)

FREE Shipping Market Price $459.99 You Save 24% ($110.00) Up to 10% off for Military & First Responders! See Details

Will this fit your Vehicle?

Select a different vehicle Help?
Update or Change Vehicle
Ship to: Ashburn - 20149
Sorry, please enter a valid US or CA postal code
We're sorry, zip can't be updated at this time.
Recommended Install Shops
How It Works
Install Shops are available near Ashburn - 20149

Add Local Shop Installation

Total cost of service $175.00
    Create a list
    Add to New List

    Saved - View your saved items

    We're sorry. We couldn't save this product at this time.

    or use

      Video Review & Installation

      Product Information

      Features, Description, Reviews, Q&A, Specs & Installation

      Features & Specs

      • Series 77 High Performance Cold Air Intake
      • Increase Horsepower & Acceleration
      • Free-Flowing Aluminum Intake Tube
      • Textured Black Finish
      • Washable & Reusable Filter
      • No Computer Tune Required
      • CARB EO Number: D-269-48
      • Simple Bolt-On Installation
      • Fits 2010-2014 6.2L Raptor

      Description

      A Powerful Enhancement. Take cooling to the next level and increase the performance of your pickup to an impressive level with this K&N Series 77 High Flow Performance cold air intake with a built in coolant reservoir. The kit directs air to your engine in greater volumes than a stock intake setup, but it also cools the air further using the coolant of the vehicle. This results in even greater levels of oxygen and performance enhancements. You can expect good reliable gains from this kit and it's simple to put in place too.

      Forget Tuning. Even with all the advanced parts of this intake tube you enjoy good reliable cooling and a power boost without needing to tune your truck. Many intakes require tuning to function properly and that isn't the case here. Once it is installed this K&N Series 77 High Flow Performance cold air intake will function.

      Aluminum and Cotton. The filter in this intake is made of a mix of aluminum and cotton. The premium cotton sits in layers between the aluminum mesh screen. This cotton is coated with a special oil and serves as the main filter of this intake to effectively pull out the nasty particles like dirt and dust during use. The aluminum mesh that houses this cotton is coated with epoxy, making it durable and long-lasting.

      Simple Stout Construction. K&N prefers to go with simple constructino whenever possible, which is why this K&N Series 77 High Flow Performance cold air intake is such a good tool. It's built from simple plastics, aluminum and stainless steel components that all withstand moisture well. The plastic coolant reservoir, intake pipe and heat shield are thick and sturdy. The stainless steel clamps and hardware offer plenty of locking force and the aluminum mesh screen is coated for strength and long-term performance.

      One Hour. Even with the added reservoir this K&N Series 77 High Flow Performance cold air intake goes on in around one hour of installation time. You just fasten it in place and it should function as it should. That's simple to do and much easier than the more advanced requirements of other intake systems.

      Lifetime Warranty. K&N offers a long-term million mile limited warranty with this intake set. You can count on the kit to last over time thanks to this protection.

      CARB Approved. Thanks to certificate D-269-48 this kit is legal for use out on public roadways in all 50 states. That's highly convenient and makes it a good option for those living in California and other more restrictive states.

      Application. This K&N Series 77 High Flow Performance Cold Air Intake with a Coolant Reservoir is specifically design to fit the 2010 to 2014 SVT Raptor equipped with the 6.2L engine.

      Technical Note. The K&N Cold Air Intake is not designed for vehicles equipped with a Body Lift.

      Shop All Truck Parts And Accessories

      Shop All Cold Air Intakes For Trucks

      Fitment:

      Details

      K&N 77-2579KTK

      CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

      Installation & What's in the Box

      Installation Info

      What's in the Box

      • (1) Air Filter
      • (1) Bracket
      • (1) "L" Bracket
      • (8) Bolts: M6 X 1.00 X 16MM , Buttonhead
      • (2) Bolts: M4 - 0.07 8MM, A/H CAP
      • (2) Bolts: 3/8”-16 X 1-1/4”L SS Hex Head
      • (2) Bolts: 8MM-1.25 X 20MM Hex Head
      • (1) Bolt: 6MM-1.00 X 16MM
      • (1) Coolant Reservoir
      • (1) Edge Trim (39”)
      • (1) Intake Tube
      • (1) Heat Shield
      • (1) Hose: 3-1/2” ID X 3” L Hump Molded
      • (1) H Hose; 3-1/2” To 3-1/4” ID X 2-1/2” L Tprd. Molded
      • (6) Hose Clamps
      • (7) Nuts: 6MM Nylock, Hexhead
      • (2) Rubber Inserts: 3/8-16 X 3/400 X 15/16L
      • (1) Rubber Mnt Stud: 1/2”L X 1”W, M6 X 1.00
      • (2) Spacers: 0.937”OD X .437”ID X .25”L
      • (1) Vent Strt. 1/2” Hose, 1/4” NPT, Plas.
      • (1) Vent: 1/4 NPT To Quick Disconnect
      • (3) Washers: 1/4” Lock
      • (16)Washers: 1/4”ID X 5/8”OD - SAE
      • (2) Washer: 8MM, FLAT
      • (2) Washers: 8MM Spring (Wave)
      • (2) Washers: 1.25”OD X .40”ID X .062 THK
      • (1) Universal Adapter 6” Filter 3.5” Coupler

      4.8

      Customer Reviews (500+)

        Questions & Answers

        10 More Questions

        Will It Fit My F-150

        • 6.2L V8 Raptor - 10, 11, 12, 13, 14

        Fits the 6.2L powered Raptor only.

            Related F-150 Categories