Cyber Monday Extended Shop Up To 70% Off
Talk to a Mustang Expert
Mon-Thu 8:30a-11p, Fri-Sun 9a-7:30p

Free Shipping on Everything. Seriously. Details

How to Install a SR Performance Throttle Body Spacer on your 2011-2014 Mustang V6

Installation Time

30 minutes

Tools Required
  • 8mm Socket
  • Hand Tools as Needed
American Muscle
Shop Parts in this Guide

1. Remove the factory or aftermarket
cold air intake

2. Using an 8mm socket, remove the 4
bolts holding the throttle body to
the intake manifold

3. Place the supplied gasket between
the throttle body and the spacer.

4. Remove the hose highlighted in the
picture below found to the left of
the throttle body and replace it with
the supplied hose in the kit.

5. Using the supplied longer hardware,
reinstall the throttle body, throttle
body spacer assembly.

6. Tighten all bolts to factory
specification and reinstall the intake

This guide applies to Vehicle years: 2011, 2012, 2013, 2014, 2015, 2016 and Submodels: V6