WIN $5,000 For Your Mustang! Enter Now
Talk to a Mustang Expert
1-888-332-7930
Mon-Thu 8:30a-11p, Fri-Sun 8:30a-9p

Free Shipping - Get it by Dec. 24th available on most items - Details

Yellow Fog Light Tint (05-12 GT)

Market Price $33.99 You Save 12% ($4.00)

$29.99 (pair)

FREE Shipping
  • Item 26254
In Stock Ships same business day. Choose options to add to cart

Features, Video & Details

  • Sleek Stealthy Styling
  • Yellow Appearance
  • Durable 12 Mill PVC Vinyl Tint
  • Optically Transparent with a Gloss Finish
  • Provides Additional Impact Protection
  • Pre-Cut for Easy Installation
  • Allows Fog Lights to Shine Through
  • Sold as a Set of Two
  • Fits All 2005-2012 GT Mustangs

Review & Installation Video

Review & Install Video

Hey I’m Justin with AmericanMuscle.com, and I’m looking at a simple and relatively inexpensive way to completely change up the look of those factory fogs on all 2005-2012 Mustang GTs. If you’ve always wondered what it would look like to switch out those white fog lights with a set of yellow lenses, but you don’t want to drop the money on a completely new set of housings, then these decals from AM Graphics would be a great way to achieve that same look, for a fraction of the price. When installed, you really can’t tell the difference between these fog lights, and these vinyl decals, a big reason for this is because the vinyl has been precision cut to the exact size of your factory fog lights making for a perfect fit. As for the install, it doesn’t get much easier than this vinyl wise, you can actually get away with adhering the vinyl directly to a clean lens, which I actually did with my own personal car, or you can go with a more traditional route and spray everything down with soap and water, then use the included squeegee to smooth everything out. Since this is an easy one, we’re going to call it about 30 minutes from start to finish. So if you’re looking for a great bang for the buck mod that will really help the front of your GT stand out in a crowd, then be sure to check out some of our yellow fog light tint available right here at AmericanMuscle.com

Aggressive Styling. Finish off the aggressive styling of your Mustangs front end with Yellow Fog light Tint from AmericanMuscle. This AmericanMuscle Graphics Yellow Tint will give your Pony impressive styling that looks great on both the street and the strip.

Perfect Fit Guaranteed. AmericanMuscle Graphics pre-cut vinyl designs have been test fit, refined, and tested again on our very own fleet of vehicles to assure an easy installation and a perfect professional fit every time.

Pre-cut Vinyl Tint. These Fog Light decals are precision cut from durable yellow vinyl for a perfect fit and impressive good looks.

Superior Quality Materials. AmericanMuscle Graphics uses only the highest grade of cast vinyl tint available on today’s market. This 12 Mil thick lens tint is designed for lens tints. Compared to other products that were designed for window sign displays that are generally around 3 mil in thickness. They also are not forgiving to install on the lights compound curve. The material type and the 12 mil thickness provides superior impact protection. The film is also breathable and self-healing polyvinyl film. Our vinyl is rated for continual outdoor use without shrinking or degradation.

Impact Protection. AmericanMuscle Graphics 12 mil thick poly vinyl tint is breathable and features self-healing properties to provide superior impact protection against stones, gravel and small road debris. A must for a daily driven vehicle.

Easier To Install. AmericanMuscle Graphics vinyl designs are not only pre-cut for a simpler installation, but our 12 mil smoked cast poly vinyl tint is extremely pliable allowing it to easily conform to complex compound curves without curling back and the clear permanent solvent polyacrylic adhesive backing will ensure that it stays securely in place.

Application. This high quality AmericanMuscle Graphics Yellow Fog Light Tint is specifically designed to fit the 2005 to 2012 GT Mustangs equipped with the stock fog lights.

Fitment: 2005 2006 2007 2008 2009 2010 2011 2012 Details

What's in the Box
  • (2) Fog Light Tint
    Tools included:
  • (1) Squeege
Installation Info
Will it fit my Mustang?
  • GT - 05, 06, 07, 08, 09, 10, 11, 12

Most Helpful Reviews

5/5
Easy install, great looks.

These were very easy to install and are very durable. Some people may have issues making them stay in place and getting rid of the air bubbles. I have a nice and simple trick for you. Some people use heat ...

Read More
Helpful (6)

4/5
looks good

fits perfectly.a pain in the butt to get water bubbles out. not as yellow as picture shows at night. easier than buying and installing yellow fog lights

Helpful (7)

Overall Rating 4.8 out of 5 stars
Read All 49 Reviews

Customer Photos (70) Submit Your Photo

View All 70 Photos

You Might Also Like

1 Questions / 1 Answers

Ask a Question

Does the tint limit visibility at all?

Derreck

  • Doesn't seem to limit visibility at all. Although I did upgrade the fog light bulbs at the time of installation.

    Eddie

    Good Answer (0) (0)

Answer This Question I need this answered (0) (0)

More Products You Might Like

Customer Reviews (49) Write a Review

Overall Rating 4.8

out of 5 stars

Installation Time:Less than 1 Hour

  • Fit 4.72093 4.7
  • Appearance 4.860465 4.9
  • Bang For Your Buck 4.604651 4.6



  • 5/5

    Installation Time: Less than 1 Hour

    September 11, 2012

    Easy install, great looks.

    These were very easy to install and are very durable. Some people may have issues making them stay in place and getting rid of the air bubbles. I have a nice and simple trick for you. Some people use heat guns... but why do that when you can just turn your fog lights on. It heats the vinyl up enough to for to the shape of the light housing and makes it very easy to squeeze out any unwanted air bubbles. Just use a soft touch as not to tear the vinyl. I removed these tints after about a year (I bought a new grille and hid the foglights behind it... the yellow made them stand out too much so I changed the yellow tint for a dark tint.) The tint was very well stuck in place, but was not difficult to remove with the right tools.

    IanR

    Year: 2011 Submodel: V6 Miami

    Helpful (6) (0)

  • 4/5

    Installation Time: Less than 1 Hour

    July 11, 2012

    looks good

    fits perfectly.a pain in the butt to get water bubbles out. not as yellow as picture shows at night. easier than buying and installing yellow fog lights

    jeff

    Year: 2006 Submodel: GT N.J.

    Helpful (7) (1)

  • 5/5

    Installation Time: Less than 1 Hour

    July 27, 2012

    Really makes the front stand out

    I really like the look and I have far less drivers flashing me because they think my hi beams are on. Next I'll get the Elenore grill.

    milkrun49

    Year: 2011 Submodel: GT Fort Myers, Fl.

    Helpful (3) (0)

  • 5/5

    Installation Time: Less than 1 Hour

    August 13, 2015

    Yellow tint

    Use soapy water,no need to remove fog lights. Let dry one week,then pop air bubbles with needle.I had only four air bubbles. Great product

    Sandman

    Year: 1997 Submodel: GT Brunswick, MO

    Helpful (1) (0)

  • 5/5

    Installation Time: Less than 1 Hour

    January 02, 2015

    Easy appearance mod

    I have always thought the old fog lights and on rally cars were cool when they were actually amber because it works better than white but I never could find one that worked until recently but I also saw this tint at the same time and saving $100 seemed like a better deal. The size is perfectly shaped and went on without a problem. The key would be to prep according to instructions and not spray too much water on the lens. American Muscle also sends a squeegee so that you don't have to worry about it. The instructions also mention using a hair dryer but I followed the advice of another reviewer and just used the heat of the lights themselves and it worked great!

    RanDoM455

    Year: 2012 Submodel: GT Dallas

    Helpful (1) (0)

  • 4/5

    Installation Time: Less than 1 Hour

    August 01, 2012

    yello fog light

    the film was a little tricky to fit ove the lights it would be better if they were a little bigger ,after i put them on and put my grill back together they look great. the lights really set of the front end

    mikepa

    Year: 2007 Submodel: GT shrewsbury pa

    Helpful (1) (0)

  • 5/5

    Installation Time: Less than 1 Hour

    July 28, 2012

    Great mod

    Took me about an hour, first one was a little tricky but got it on there, second one went on there no problem

    Stangman88

    Year: 2011 Submodel: GT inglewood ca

    Helpful (1) (0)

  • 5/5

    Installation Time: Less than 1 Hour

    April 29, 2014

    they look great

    First....clean the lenses with a good cleaner...I don't care what they say....clean them....use a couple sprays of water and they go on easy....turn lights on to dry excess water.

    jonnienumberfive

    Year: 2009 Submodel: GT keene..new hampshire

    Helpful (1) (1)

  • 5/5

    Installation Time: Less than 1 Hour

    August 06, 2012

    Quick and Easy

    I actually found these incredibly easy to do - take the fog lights out of the grill for the easiest install. Once cleaned, these were simple to get lined up and the squeegee tool makes it easy to deal with any bubbles. Makes the lights really stand out on the car and is a good look for next to nothing.

    matthewtoney

    Year: 2011 Submodel: GT Charlotte, NC

    Helpful (0) (1)

  • 4/5

    Installation Time: Afternoon

    July 15, 2012

    Great Bang For the Buck....

    I thought i would try the " tint" before buying the yellow fog light assemblies to see if i liked the look. I found it best to remove the grille and then remove the foglights from the grille housing. I live in the south, so lots of bug residue to memove, and removing the fog light assemblies makes the process of cleaning and applying the tint so easy to work with! The down side is that if your car is a daily driver, there are minor nicks and scratches on your lenses from daily driving. So when the tint is installed you can notice scratches and pits on the lenses. Overall, great look and lots of compliments, this does make our cars stand out, and looks great at night!

    Gino101

    Year: 2008 Submodel: GT

    Helpful (0) (4)

  • 5/5

    Installation Time: Less than 1 Hour

    October 24, 2016

    The perfict thing to set your Stang apart.

    It only took me 15 minutes to do both. I LOVE the look, and even like the difference in night time visibility.

    Cozy

    Year: 2010 Submodel: GT

    Helpful (0) (0)

  • 5/5

    August 25, 2016

    Good Product

    I'm very pleased with the yellow film for the fogs. I followed the directions and it came out really good. Excellent product.

    08VaporGT

    Year: 2008 Submodel: GT

    Helpful (0) (0)

  • 5/5

    August 17, 2016

    Makes the front end Pop!

    Definitely worth the money. On my Kona Blue the yellow really sets off the car. There were points that I thought the adhesive didn't stick correctly but with a pinhole as the directions say and waiting for the lenses to 'cure', they turned out great. Obviously cheaper than an actual set of new yellow fogs lights but I think just as stunning. I'm sure most aren't as nuts about the look as I am but my main motivation for putting these on was to commemorate Ford's 2016 Le Mans Victory 50 years after they first won it in 1966, and beat Ferrari. The GTE Pro Class that the new Ford GT competes in all have to run yellow lights, so to honor that heritage and celebrate Ford's win this year, I decided to make my fog lights yellow! Go Ford and thanks American Muscle for a cheap and easy way to make a big difference in my car's look.

    kona2012

    Year: 2012 Submodel: GT

    Helpful (0) (0)

  • 5/5

    August 10, 2016

    Aggressive styling!

    So much better looking then the chrome back drop of the stock fog lights and in an area that gets fog every other day, these really help get some needed light in the early mornings!

    Dita

    Year: 2011 Submodel: GT

    Helpful (0) (0)

  • 5/5

    August 01, 2016

    Tint

    Quality product, super easy to install! What more can you say?! Highly recommended!

    UKSTIG

    Year: 2008 Submodel: GT

    Helpful (0) (0)

  • 5/5

    July 20, 2016

    Great product

    The two pieces of yellow tint that I got from AM are perfect! They come pre cut, with directions and are super easy to lay on. They also stuck to fog lights extremely well. Couldn't ask for a better styling product for the money!

    RepRepenstein

    Year: 2011 Submodel: GT

    Helpful (0) (0)

  • 4/5

    July 07, 2016

    Small Change. Big Result.

    Don't be discouraged if you have some mini bubbles after installation. It is also very easy to get fingerprints in the adhesive. Take your time and the results are worth it. Changes the entire look of the front end, even with a stock bumper. Just a tip: I removed my fog lights from the car to make installation easier. Highly recommend!

    11CoyoteGT

    Year: 2011 Submodel: GT

    Helpful (0) (0)

  • 5/5

    Installation Time: Less than 1 Hour

    July 05, 2016

    Yellow fog light tint

    I bought these and they were here in 4 days. The fitment was great and easy to put on. I removed the vinyl from the wax paper and spared a light mist of water on the adhesive and made it a lot easier to handle. Look amazing at night and day!! Highly recommend!! Thanks AM!

    Greg26

    Year: 2012 Submodel: GT

    Helpful (0) (0)

  • 5/5

    Installation Time: Less than 1 Hour

    June 30, 2016

    Phenomenal!!!

    Took about an hour to install and I love the outcome!

    ShadoProject

    Year: 2005 Submodel: GT

    Helpful (0) (0)

  • 5/5

    Installation Time: Less than 1 Hour

    June 25, 2016

    Mustang GT upgrades

    Fog light tint went on easy and looks great. The hardest part was getting the trapped air out just take your time.

    Phase1

    Year: 2007 Submodel: GT

    Helpful (0) (0)

Related Mustang Categories