Win $17,760 For Your Truck! Enter Now!
Talk to an F-150 Expert
1-888-332-7930
Mon - Sun, 8:30 AM EST - 11:00 PM EST

Free Shipping On Orders Over $49. Details

K&N Series 57 FIPK Cold Air Intake (09-10 5.4L, Excluding Raptor)

Market Price $334.64 You Save 13% ($43.65)
Starting At

$290.99

FREE Shipping
  • Item T527674-CA
  • MPN# 57-2575

Will this fit your F-150?

Features & Details

  • Improves Horsepower and Acceleration
  • Filters Out Harmful Contaminants
  • No Computer Tune Required
  • CARB EO Number: D-269-48
  • Simple Bolt-On Installation
  • Fits 2009-2010 5.4L F-150s, Excluding Raptors
Torque and Horsepower Boosting CAI. The more air gets into your 2009-2010 F-150’s engine, the better (within wide limits), and the K&N Series 57 FIPK Cold Air Intake creates a potent indraft that gets the combustion fires burning hotter and more thoroughly in your truck’s engine. That translates to benefits like better throttle response and a few more miles per gallon of gasoline. But most of all, it means more torque and horsepower across the whole rpm spectrum – peaking at around 4,600 rpm with dyno-tested improvement of +12.5 horsepower and +11 ft-lbs. This intake lets your truck catch its breath and work even harder.

Works with the OE Tune. The K&N Series 57 FIPK Cold Air Intake is designed to fit right into your F-150’s engine without the need to fuss over aftermarket tunes or adjustments to the ECU. The stock computer tune will do the job and let the Series 57 run at its intended level.

Aluminum-Strengthened Washable Filter. Made up of layers of red cotton gauze, the filter element in the K&N Series 57 FIPK Cold Air Intake is buttressed by two layers of epoxy-coated aluminum mesh embedded inside. Depending on how dirty the environments are you drive in, the filter can go up to 100,000 miles before you need to clean it. After washing, it can be reinstalled repeatedly – the fabric is also dry and oil-free.

High Construction Standards, American-Made. The K&N Series 57 FIPK Cold Air Intake is centered around a high-density polyethylene tube, which is cross-linked and manufactured via rotational molding for superior strength and durability. The free-flowing design has unrestricted bends that don’t crimp the air flow. The heat shield is also made from polyethylene, injection molded in this case. The component is USA-made and comes with 6 stainless steel clamps as part of its build.

Designed for the Stock MAF. The K&N Series 57 FIPK Cold Air Intake has a MAF housing made to fit the factory MAF like a glove.

Simple Bolt-On Fitment. You don’t need to drill any new mounting holes or cut any additional space in order to attach the K&N Series 57 FIPK Cold Air Intake. The CAI bolts on in place of the stock intake using the same attachment points, plus its own set of hardware. Installation requires only wrenches, a screwdriver, and a ratchet set.

Million-Mile Warranty. K&N covers all of its intakes, including the K&N Series 57 FIPK Cold Air Intake, with a 1 million mile limited warranty.

CARB Certified for 50 State Use. With a CARB EO Number of #D-269-48, the K&N Series 57 FIPK Cold Air Intake is ready to take legally to the street, road, or highway in California as well as any other locale that falls under CARB rules. This CARB certified part is 50-state legal in the United States. In order to pass inspection in CARB states, the CAI must be set up so that the CARB compliance sticker is visible.

Application. The K&N Series 57 FIPK Cold Air Intake is specifically designed to fit the 2009 to 2010 F-150s equipped with the 5.4L engine. It is not compatible with the 5.4L SVT Raptor. Please Note. The Cold Air Intake Kit was not designed to fit F-150s with a body lift.

Note: Coupon codes cannot be applied to this product.

Fitment: 2009 2010 Details

What's in the Box
  • (1) Air Filter
  • (1) 17" Edge Trim
  • (1) 42" Edge Trim
  • (1) Heat Shield
  • (1) Intake Tube
  • Necessary Hardware
Installation Info
Tech Specs
Cold Air Intake Specifications
Year/Model: 2009-2010 5.4L Filter Placement: Engine Bay
Material: High-Density Polyethylene Finish: Black
Manufacturer: K&N Computer Tune Required: No

Estimated Horsepower & Torque Gains:
Estimated HP: 12.47 hp @ 4600 rpm Estimated Torque: 14.25 lb-ft @ 4600 rpm
Will it fit my F-150?

People Who Bought This Item Also Bought

Most Helpful Reviews

5/5
Great sound and less hesitation

I was skeptical that a small mod like this could improve gas mileage, sound, and reduce hesitation when you hit the gas pedal. My truck used to lug up hills now it purrs like a champ. Gas mileage gain ...

Read More
Helpful (2)

5/5
Very nice

I really like this product it has helped my truck with gas mileage and you can tell the difference in the way it runs.

Helpful (1)

Overall Rating 5 out of 5 stars
Read All 4 Reviews

Customer Photos (2) Submit Your Photo

View All 2 Photos

You Might Also Like

Q & A

No questions about this product yet.

Ask the First Question

More Products You Might Like

Customer Reviews (4) Write a Review

Overall Rating 5.0

out of 5 stars

Installation Time:Less than 1 Hour

  • Performance Gain 5 5
  • Fit 5 5



  • 5/5

    October 03, 2016

    Great sound and less hesitation

    I was skeptical that a small mod like this could improve gas mileage, sound, and reduce hesitation when you hit the gas pedal. My truck used to lug up hills now it purrs like a champ. Gas mileage gain is about 2mpg better and at 4,000rpm she's sounding like a Mustang. Couldn't be happier!

    MoonOwl

    Year: 2010 Submodel: 5.4L V8 XLT

    Helpful (2)

  • 5/5

    September 14, 2016

    Very nice

    I really like this product it has helped my truck with gas mileage and you can tell the difference in the way it runs.

    Keeter

    Year: 2010 Submodel: 5.4L V8 FX4

    Helpful (1)

  • 5/5

    Installation Time: Less than 1 Hour

    October 08, 2017

    Cold air intake for 2010 F150 king ranch

    Plug and play. Instantly got the increase in Hp and torque. Sound was amazing.

    ToddR

    Year: 2010 Submodel: 5.4L V8 King Ranch

    Helpful (0)

  • 5/5

    Installation Time: Less than 1 Hour

    April 19, 2017

    Immediate response, sound and feel !

    After spending about 35 minutes to install this part I then started up my truck, it sounded great - upon driving around the block a few times boy did it sound mean ! Quicker acceleration - I just can't get enough of that sound when I press down the accelerator ! I can feel the sound/vibrations on my foot just by pressing down the accelerator... Great buy !!!

    DRuizJr81

    Year: 2010

    Helpful (0)

Related F-150 Categories