More Air for Powerful Engines. If you have a built or supercharged 1986 - 1993 5.0 Mustang - or are planning on big cam, heads, or forced induction down the line - your stock 58mm or 60mm stock throttle body is going to choke your engine. Accufab's top of the line CNC machined 75mm billet aluminum throttle body and 2" EGR spacer kit is what you need to insure proper airflow and get the maximum performance from your upgrades.
Exceptional Quality. CNC machining of billet aluminum, combined with stainless steel shafts, insures that Accufab's product is a quality piece that will last and perform. Manufacturered with only the best components, this 75mm throttle body and spacer deliver unparalleled reliability and performance.
Feel the Power. More air means more power from both existing and future modifications. With this kit, you'll bolt on more ponies in minutes and increase your throttle response. If you are planning on an aggressively modified 5.0, but want to keep it street legal, this throttle body is the perfect compliment to both the mods you have and the ones you want to do.
NOTE: A 75MM Throttle Body is suggested for a built or supercharged 5.0. If you have a stock or mildly modified 5.0, consider Accufab's 70mm kit with EGR spacer, as your Mustang will not benefit from the larger throttle body.
NOTE: Idle Speed should only be set by adjusting the Throttle Position Sensor. DO NOT adjust any screws on the Throttle Body. These screws are pre-set at Accufab.
NOTE: Though a tune is not required after installation, you may experience some minor irregularities at idle. AmericanMuscle recommends a tune after installing any throttle body in your 5.0.
1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993 Details >>