JLT Cold Air Intake (05-09 V6)

JLT Cold Air Intake (05-09 V6)
Click to Enlarge

TRANSCRIPT

Hey guys, Mike Wilson here from AmericanMuscle.com, today we’re going to take a look at the JLT cold air intake kit for the 2005-2009 Mustang V6, and what you can expect from horse power and torque gains when we install it along with one of our Bama performance 93 octane race tunes. Before we get to any of that, we’re going to make a stock dyno run to see what our baseline horse power and torque numbers are. Stock, our 2005 V6 automatic put down 172 horse power and 196 ft/lbs of torque. The JLT cold air intake kit replaces your factory restrictive airbox, with a high flow reusable air filter, and a plastic inlet tube, that’ll help increase horse power, torque, acceleration, and give you a throaty engine sound. Now we’re going to install this cold air intake, which should take less than an hour, and can be done with simple hand tools you have at home. Along with the cold air intake, we also installed one of our 93 octane Bama race tunes. A custom tune from Bama performance adjusts engine parameters to maximize performance, through optimized air/fuel ratio, spark advance, enhanced throttle response, and for automatics, increased shift firmness and adjustable shift points. Now let’s make another dyno run, and see what kind of horse power and torque numbers we get. We installed the JLT cold air intake kit along with a Bama performance tune, and our car put down 196 horse power and 224 ft/lbs of torque, while gaining as much as 30 horse power, and 36 ft/lbs of torque, throughout the curve. We installed our JLT cold air intake kit and our Bama performance tune all in under an hour’s time using simple hand tools, and we picked up as much as 30 horse power, and 36 ft/lbs of torque
... READ MORE

About JLT

JLT Performance Cold Air Intakes
JLT Performance is a family owned business driven by a passion for Mustangs. Owned by Jay and Lisa Tucker, JLT Performance started in 2004 with one product for the 03, 04 Cobra and has grown to a never ending product line for nearly every late model Mustang out there. They understand the need for products that not only work, but look good and are affordable too. They feel they have some of the best products on the market and stand behind their products 100%, giving superior customer service. Being MADE IN THE USA, JLT and American Muscle make a winning team!
... READ MORE
OUR PRICE$209.99
Market Price $234.99You Save 11% ($25.00)
Item # 62015
AmericanMuscle no longer carries the JLT Cold Air Intake (05-09 V6). Please check out 05-09 Mustang Cold Air Intakes for an updated selection.
Email

Product Features

  • Increases of 10 to 14 RWHP w/Tune
  • Better throttle response
  • Reusable S&B high flow air filter
  • Gloss Black Finish
  • Easy installation
  • Fits 2005 to 2009 V6 Mustangs
  • Computer Tune Required - Why is a Tune Required?
More Usable Horsepower. With a JLT Performance Cold Air Intake and a custom tune installed in your 2005 to 2009 V6 you can expect to see average gains of 10 to 14 more horsepower at the rear wheels. In addition to an increase in horsepower you will also see an impressive improvement in throttle response.

Money Saving Reusable Filter. JLT cold air intake kits come complete with a high flow reusable S&B brand air filter. So that means there is no need to go out and buy a new filter every few thousand miles. Now you can just clean the filter, re-oil it, save money, and go!

Easy Installation. The JLT Performance Cold Air Intake kit was designed to install with just basic hand tools. No extra modifications or special tools are required for an easy 1 hour installation.

Application. This JLT Performance Cold Air Intake System is specifically designed for use on the 2005 to 2009 V6 Mustangs equipped with the 4.0L V6 engine and requires re-tuning the vehicles computer for operation.

Technical Note: The use of a SCT SF3/X3 PowerFlash or SCT LiveWire tuner is required to reprogram the vehicles computer for this Cold Air Intake.

Cold Air Intake Specifications
Year/Model: 2005-2009 V6 Filter Placement: Engine Bay
Material: PVC Finish: Black
Manufacture: JLT Computer Tune Required: Yes

Installation Time:

(approx) 1 Hour

Difficulty Level:

Simple installation for anyone.
checkmark
Fitment:
  • V6 05, 06, 07, 08, 09

Customer Reviews