(approx) 1 Hour
Simple installation for anyone.
Features, Description, Reviews, Q&A, Specs & Installation
Fitment: 2005 2006 2007 2008 2009
CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
December 28, 2019
Doesn’t fit at all HORRIBLE QUALITY USE YOUR MONEY WISELYHelpful (0)
December 17, 2019
Great product nice wow factor when you pop the hood would recommendHelpful (1)
October 05, 2019
Cold Air Intake
Ok first off this thing is freaking huge. Like I had no idea how cool it looks under the hood- especially when I pop it for my car friends and their eyes pop out too. Great looking piece and sounds awesome. Love tapping the gas and hearing the air being sucked in. Install was very simple and fits right on. HOWEVER. The second hose clamp up towards the throttle body is very difficult to attach. I had to be extremely careful stretching it so as not to snap it. Performance wise it adds a few ponies to the belt. Mainly using it as a head turner and a starter mod to build off of. NOTE—- it did throw a check engine light for me for awhile. Shifting seemed a tad wonky but nothing to throw a fit over. Cleaning is also very simple as wellHelpful (0)
September 19, 2019
Great for sound and MPG
Installing the product was slightly questionable as the heat shield and a couple other parts had to be forced into position and aren't shaped to where they need to be in the end. However It went on eventually decently easy, and it looks and sounds great, from what I have drove it so far it has improved my MPG by 3-4 and there is a noticeably different feel. It also sounds great with no raspy air sound and has improved my exhaust tone and engine sound. (leave yourself more than a hour if you haven't done this before but won't take more than a hour and a half to two hours.Helpful (0)
August 08, 2019
replacement air breather
Easy to install and looks great. Reasonable price and no re-tuning needed.Helpful (0)
August 06, 2019
The parts don’t fit well at all I had to buy a extended censor because the stock one isn’t long enough there is basically no instructions and the intake pip is supposed to connect to the box but it doesn’t reach by far.Helpful (2)
July 29, 2019
Nice polished aluminum intake
A good looking under hood mod and paired with a tune it works well. Super easy install but you will need to extend the pvc hose from the passenger valve cover. Which is easily done using a piece of 3/8 rubber fuel line and the original quick release fittingsHelpful (0)
July 17, 2019
SR Air intake
Had a hard time trying to get it too seal around the intake.The hookup to the engine to the coolair intake was to short .However got it stretched far enough to hook it up,I unhooked the negative battery post from the battery as recommended. Got it all hooked up. Cracked up car check engine light came on wouldn't go off.Helpful (0)
June 08, 2019
Looks good, works
Product looks good. Cone filter seemed a little cheap and flimsy. I was under the impression (from QandA's I'd read) that it would come with a hose to connect to the PCV, but it did not. I used some spare hose I had laying around and got it to work. Also, this style does not work perfectly with aftermarket intake mani and TB. The joint connecting the two chunks of tube rests on the power steering reservoir. Overall good for a cheaper CAI.Helpful (0)
May 30, 2019
Cold air intake
Great performance upgrade also noticed a difference in exhaust soundHelpful (0)
I bought a 2006 Mustang GT 4.6 with your Cold Air Intake already installed. I live in Calif. and when I went to smog it they said I need a sticker with a code to put into the States emissions. Can you help with this? Either I need the sticker our the code necessary for it to pass smog. Thanks
The SR Performance Aluminum Cold Air Intake is not CARB compliant, and will not have a CARB sticker or EO Number.
What is everyone using for their pcv hose , as it’s to short to connect to the intake. I have a bank 1 and bank 2 running lean code and I believe it’s coming from my dry rotted/ tapped up to make longer pcv hose.
The SR Performance Aluminum Cold Air Intake will include a section of hose for applications requiring a longer PCV hose. If your kit did not include this, please contact our Customer Service department so that we may assist you with this further.
Will this fit a 4.6 GT V8 C/S ?
The SR Performance Aluminum Cold Air Intake will fit the 07'-09' California Special Mustang GT.
Do I need to disconnect the vehicle's negative battery cable before installation having in mind there will be no extra computer tunes applicable?
You would not need to disconnect the battery when installing this intake. However anytime working under the hood, would not be a bad thing to disconnect he battery.
How much horsepower will this add?
Yes, the SR Performance Aluminum Cold Air Intake will work well on all 2005-09 GT models.
Yes, after cleaning the filter, it will need to be re-oiled.
Please follow this link here if you are already a Bama Tunes for life member: https://www.americanmuscle.com/free-sct-custom-tune.htmlIf not please follow this link here to purchase the tunes for life program: https://www.americanmuscle.com/free-sct-tune.html
Hello, LeighGT5U3920574 when something like this occurs what I would recommend would be to check all of your connections and get the check engine light read.
The SR Performance Aluminum Cold Air Intake is not compatible with shaker hoods without modification.
You can clean the filter with soap and water. Remember to rinse the filter extremely well with lower pressure water. Allow the filter to completely air dry. You do not want to install the filter while there is still water in it. As for oil for the filter, I suggest the K&N Recharge Kit. You can use most filter oiling kits with the SR Performance Filter.
With the SR Performance Aluminum Cold Air Intake - Polished (05-09 GT) you are looking to get about 10-15HP gain. However each car is different and the environment around you will also factor into how much HP your car gains.
Hello, you would have to search for a Cold Air Intake that would have a CARB EO Number, unfortunately the SR Performance Aluminum Cold Air Intake - Polished (05-09 GT) does not have a CARB EO Number, so this Cold Air Intake wouldn't be legal in California. You would have to find a Cold Air Intake like the C&L Street Cold Air Intake w/ 83mm MAF - No Tune Required (05-09 GT) http://www.americanmuscle.com/cnl-cai-0509gt.html for example. Notice how it has a CARB EO Number and it also states: "CARB Certified. Best of all, this Mustang C&L Cold Air Intake Kit is 50-state smog legal under Carb EO# D-640. Carb Certification is for models with a production date of 5/2005 or later."
I am sorry but the SR Performance CAI is not CARB Certified. If a product like a Cold Air Intake is CARB certified, we will list the CARB EO number under the Features and Description on the product page. Do want to make a note that, some CAIs we carry for the 2005-2009 Mustangs are only CARB for certain years. If you have a 2007 GT, the Airaid Cold Air Intake with the Sythamax Dry Filter is CARB Certified. Hope this helps!
(approx) 1 Hour
Simple installation for anyone.
What's in the Box
|Year/Model:||2005-2009 GT||Filter Placement:||Engine Bay|
|Manufacture:||SR Performance||Computer Tune Required:||No|