$7,000 Summertime Mustang Build Enter Now!
Talk to a Mustang Expert
1-888-332-7930
Mon - Sun, 8:30 AM EST - 11:00 PM EST

Free Shipping On Orders Over $49. Details

SR Performance Black Cold Air Intake (05-09 V6)

Market Price $139.99 You Save 14% ($20.00)
Our Price

$119.99

FREE Shipping
  • Item 41096
  • MPN# 41096

In Stock Ships same business day. Choose options to add to cart

Features & Details

  • Increases Horsepower and Throttle Response
  • Reusable High Flow Air Filter
  • Gloss Black Powder Coated Finish
  • Simple Installation
  • Fits 05-09 4.0L V6 Mustangs
  • No Tune Required
Improves Horsepower. This SR Performance Cold Air Intake kit completely replaces the restrictive stock air box and paper filter element in your 2005 to 2009 4.0L V6 mustang with a high flow filter assembly for a noticeable increase in horsepower and throttle response all while still filtering out harmful power robbing dust particles. This SR CAI pulls in cooler denser air to make more power that you can feel.

Reusable Filter. Included in this kit is a SR Performance High Flow reusable air filter. So there is no need to go out and buy a new filter every few thousand miles. Just clean the filter, re-oil it, save money, and go!

Powdered Coated Finish. The SR Performance Cold Air Intake will not only improve horsepower and acceleration, but it will also improve your Mustang's under hood appearance with a striking gloss black powder coated finish. Now you can have the best of both worlds, performance and style.

Simple Install. The SR Performance Cold Air Intake kit is relatively easy to install with only basic hand tools needed. No extra modifications are required for the installation. See the video below for a basic overview of the installation process.

Technical Note. The Mass Airflow Housing and Sensor are not included. This kit is designed to reuse the stock unit.

Fitment: 2005 2006 2007 2008 2009 Details

What's in the Box
  • (1) Support Bracket
  • (4) Washers
  • (2) Nuts
  • (2) Bolts
  • (1) Rubber Trim
  • (3) Clamps
  • (1) Rubber Hose Connector
  • (1) Threaded Grommet
Installation Info
Tech Specs
Cold Air Intake Specifications
Year/Model: 2005-2009 V6 Filter Placement: Engine Bay
Material: Aluminium Finish: Black Powder Coat
Manufacture: SR Performance Computer Tune Required: No
Will it fit my Mustang?
  • V6 - 05, 06, 07, 08, 09

People Who Bought This Item Also Bought

Most Helpful Reviews

2/5
Not the best bang for your buck

I bought this product based of the reviews and it was a good price. I'm glad others had more success than I did. AM did a great job getting it o me fast. The product came and was missing 1 clamp, 2 ...

Read More
Helpful (13)

5/5
Stack It

This thing is awesome! I love the black finish. Total sets off the look under the hood. Power gain was pretty good too!

Helpful (8)

Overall Rating 3.9 out of 5 stars
Read All 34 Reviews

Customer Photos (14) Submit Your Photo

View All 14 Photos

You Might Also Like

9 Questions / 8 Answers

Ask a Question

does it make a difference in sound or horsepower if I were to replace the SR filter with a bigger one?

FourSeasons

  • Nope - no difference in performance or sound..

    BeachJC

Show 2 more answers Helpful (4)

Is a tune required? SR Performance Cold Air Intake (05-09 V6)

hotshoe

  • A new computer tune is not required for this Cold Air Intake. However, getting a tune for this would help you get the best performance from your new upgrade. If you have any questions about tuning your Stang, give our Bama guys a ring! They'd be happy to help answer any questions or concerns you may have!

    LisaS

Show 2 more answers Helpful (2)

I installed the cai now I get a check engine light and electronic throttle Control light is on what did I do wrong and how do i fix it

cwm

  • The SR Performance Black Cold Air Intake should not cause any check engine light or throttle control lights to illuminate. This sounds as if one of the connectors on the throttle body may have been disturbed or is not fully seated. The MAF connector may also not be fully seated. If these are not what is causing this, please contact our Customer Service Department so that we may assist you directly with this.

    Rob D

Helpful (0)

I want to know how everyone got theirs installed properly because this is my second intake in a row and both of them were made in a way where the MAF sensor is backwards. I had to ZIP TIE my sensor into the intake the right way because apparently no one looks at what their building or sending or anything. I was guaranteed a right one this time and I don't see much professionalism here.

BrandonP

Is this smog-legal in California?

AlexG

  • The SR Performance Black Cold Air Intake does not carry a CARB EO # and would not pass smog in California.

    Rob D

Helpful (0)

There's plenty of reviews mentioning how screws,clamps, and such are missing and how holes aren't big enough for the screws supplied, so can you just give a quick look and make sure about everything being included as advertised? Not an insult, just common professional courtesy is all. Excited and want good experience, just rather not wait for it to turn around and refund it. Thanks.

BrandonP

More Products You Might Like

Customer Reviews (34) Write a Review

Overall Rating 3.9

out of 5 stars

Installation Time:Less than 1 Hour

  • Performance Gain 3.684211 3.7
  • Fit 3.7 3.7



  • 2/5

    February 05, 2011

    Not the best bang for your buck

    I bought this product based of the reviews and it was a good price. I'm glad others had more success than I did. AM did a great job getting it o me fast. The product came and was missing 1 clamp, 2 bolts for the lower heat shield, no *supplied* t-20 torx tool, and no instructions. The heat shield was bent and had to be reformed at the arms(no big deal, just an inconvenience.) The drilled holes were too small for the bolts supplied. The holes had to be drilled larger. This install was not quick or easy. Took a good hour to hour and a half. When it's all said and done it's just an expensive engine dress up accessory. No power boots were noticed, I'm sure a tune is needed. The ONLY reason I rated this 2 stars is ONE for AM's quick delivery and TWO the CAI makes a cool whistle sound. Don't waste the money.

    Eddie

    Helpful (13)

  • 4/5

    March 08, 2010

    Stack Racing V6 Cold Air Intake

    I am really enjoying the product that i bought, i instantly noticed a quicker response when i hit the gas.

    Tim J Collins

    Helpful (8)

  • 5/5

    December 28, 2009

    Stack It

    This thing is awesome! I love the black finish. Total sets off the look under the hood. Power gain was pretty good too!

    Joey D

    Helpful (8)

  • 4/5

    February 10, 2011

    Stack CAI

    This CAI definitely provides better HP but if you are installing this yourself be prepared to visit Home Depot for missing part. You will need the following (3)5/16" washers, (2) 8mm wing nuts,(2)1/4" washers,(1) 5/16"x1" Bolt, (1)5/16" nut, T20 torx tool. This should all cost around $5.

    Jonathan M.

    Helpful (5)

  • 5/5

    May 10, 2010

    Awsome power

    This is a awsome intake.It was a struggle to get the throttle body coupler on. But it looks grest and sounds better. I can feel a big difference in the drive when I put my foot in it.

    Vermillion

    Helpful (5)

  • 3/5

    June 11, 2010

    annoyed...

    first of all it does the job when talking about an increase of power, very noticeable on a v6...but no instructions, and not alll of the necessary screws made it hard to install... it was really really annoying, but i guess....but sounds great and does a good job, and btw its been two days and the rubber double-sided screw already broke. and like someone already said you must stretch the MAF wire to connect it!!!!

    Eric

    Helpful (4)

  • 5/5

    January 15, 2010

    good product

    was an excelent product u can feel an increase in horse power i put this on my 2008 v6 and love it the only problem is the wasnt any instructions but it took ten mins to install

    justin hendrickson

    Year: 2008 Submodel: V6

    Helpful (3)

  • 2/5

    Installation Time: Less than 1 Hour

    April 01, 2013

    not the best!!

    was an easy install, but after installation there was rough idle and p0174 and p0171 emission codes. after clearing them and sealing leaks, the intake has a high pitch ring. stock is much better..do your research!!!

    KINGRL

    Year: 2005 Submodel: V6 Toronto, ON, Canada

    Helpful (2)

    • Response from AmericanMuscle

      Both P0174 and P0171 can be caused by the MAF sensor being dirty or a leak being present. Cleaning your MAF sensor and checking for any leaks as you've done would solve those trouble codes. Part of installing any intake, whether it be stock or aftermarket, involves making sure there are no leaks in the system to prevent any problems. Your new system should be running well now - if you're having any other issues, please don't hesitate to give us a call.

      Lisa , Customer Care

  • 1/5

    Installation Time: Less than 1 Hour

    May 23, 2017

    COLD AIR INTAKE

    I CAN'T USE IT.CAR WILL NOT RUN DUE TO MASS AIR SENSOR BOLTING IN BACKWARDS.I'M A CERTIFIED MECHANIC,I HAD MY FRIEND LOOK AT IT THAT DEALS WITH PROGRAMMING AND FAULTS WITH CAR COMPUTERS.HE SAID IT WOULD NOT RUN DUE TO MASS AIR SENSOR BEING BACKWARDS.I CAN'T SELL IT BECAUSE IF IT DOESN'T WORK I'M NOT STICKING SOMEONE ELSE WITH IT.VERY DISAPPOINTED UP TO NOW EVERYTHING HAS WORKED VERY GOOD.THIS IS THE FIRST BAD EGG.

    FLATBUSH

    Year: 2008 Submodel: V6

    Helpful (1)

  • 1/5

    Installation Time: Afternoon

    May 10, 2017

    Awful product once. Awful product again

    I was very excited to receive this intake for my 2008 v6 mustang.The part came in very fast and was easy to put together and fit in the throttle great. HOWEVER the air flow sensor does not fit on the pipe. I called American Muscle and they sent me a replacement. The replacement came in and still the sensor did not fit. Very upset with the time I put in to install this just for the sensor not to go on. Would not recommend this product. Thanks for nothing

    Aj

    Year: 2008 Submodel: V6

    Helpful (1)

  • 4/5

    Installation Time: Afternoon

    November 09, 2016

    Really Good Product! READ THE REVIEW

    Intake came really quick (3 days). Began putting the pieces together and realized that 2 of the nuts to the ABS attachment at the bottom of the heat shield were not to be found. I had to wiggle with the placement of the heat shield and the throttle head to fit, but worked out fine. Love the performance and the sound is incredible! Looks great under the hood! Don't be disappointed if you don't get all the parts. It's happened to quite a few people, including me. Great Buy!

    Stoney21

    Year: 2006 Submodel: V6

    Helpful (1)

  • 5/5

    Installation Time: Less than 1 Hour

    November 01, 2016

    Great product

    As far as proformance it works great when you put your foot on the gas. I can now easily do burnouts. Instructions would be nice tho

    Hunt

    Year: 2007 Submodel: V6

    Helpful (1)

  • 5/5

    October 10, 2016

    Good buy

    Product was easy to install and looks good as well. It makes a difference on take off a little. And you can hear the sound of it too.

    Cpford16

    Year: 2005 Submodel: V6

    Helpful (1)

  • 4/5

    July 26, 2016

    Awesome, but missing a bolt.

    The install and fit was pretty good. The M8 bolt intended for non ABS vehicles wasn't included but it was fine because I had something that fit. It sounds great and definitely feel a better throttle response.

    steve

    Year: 2005 Submodel: V6

    Helpful (1)

  • 4/5

    Installation Time: Less than 1 Hour

    April 11, 2016

    Great!

    The product was great easy and fast to install, I installed it in about 45 mins, also a great price for the product!

    Barber17

    Year: 2005 Submodel: V6

    Helpful (1)

  • 4/5

    Installation Time: Afternoon

    January 30, 2013

    SR performance CAI

    Looks great, but the metal sheeted wall just doesn't line up and i had to makeshift where the the bolts would be place. Put in pretty ghetto like due to alignment.

    JoeMo

    Year: 2008 Submodel: V6 Sebastian, FL, USA

    Helpful (1)

  • 5/5

    September 07, 2010

    Stack Racing V6 Cold Air Intake

    I put Stack Racing and Trottle body spacer and the power is great way quicker.

    Ben W

    Helpful (1)

  • 4/5

    February 14, 2010

    looking for speed

    With no instructions it took a little time to figure things out, once I got it in noticable throttle response right off the bat, as far as gas mileage I have not driven enough to tell. I think its worth the price compared to other cold air intakes.

    Daniel M Lovy

    Helpful (1)

  • 2/5

    Installation Time: Afternoon

    August 18, 2017

    Wasn't worth it

    Sent me the wrong amount of bolts/nuts, and rubs the hood of my car, I now have to slowly put my hood down. feels like it works well, but the hole thing together, I'd rather have my stock still on.

    RyanR

    Year: 2005 Submodel: V6

    Helpful (0)

  • 5/5

    Installation Time: Afternoon

    June 19, 2017

    Great Product

    You'll need some extra bolts for mounting one part of the heat shield, also have to bend it a little bit to fit inside. Only took longer because I had to run to ace for the bolt. Combined this with a throttle body spacer and the car sounds great, definitely an increase in power and torque. 100 would recommend, car idling also sounds much better and cleaner. Also have to the disconnect the negative terminal on the battery in order to avoid the check engine light you will get from the engine not adjusting. Also looks very clean inside the engine bay

    DGierczynski

    Year: 2008 Submodel: V6

    Helpful (0)

Related Mustang Categories