Free Shipping On Orders Over $49. Details

Talk to a Mustang Expert
1-877-887-1105
Every day 8:30AM EST - 11:00PM EST
Win Any Wheel & Tire Package! Enter Daily

JLT Performance Big Air Cold Air Intake (07-09 GT500)

Market Price $419.99 You Save 17% ($70.99)
Our Price

$349.00

FREE Shipping

  • Item 62040
  • MPN# CAIP-GT500-07

Will this fit your Vehicle?

In Stock Ships same business day.
Ship to: Ashburn - 20149
Sorry, please enter a valid US or CA postal code
We're sorry, zip can't be updated at this time.
    Create a list
    Add to New List

    Saved - View your saved items

    We're sorry. We couldn't save this product at this time.

    Features & Details

    • More Torque and Horsepower
    • 123mm MAF Housing
    • Reusable S&B Power Stack Air Filter
    • Easy Installation and Maintenance
    • Computer Tune Required - Why is a Tune Required?
    • Fits 2007 to 2009 Shelby GT500
    Astounding RWHP Gains. Your GT500 is a stallion, and its purebred bloodline demands only the best when you punch the accelerator. The JLT Performance Cold Air Intake is the place to start - and potentially gain eye-popping performance increases (when a tune is also applied). What are you waiting for?

    123mm MAF Housing. With a massive 123mm MAF housing "the largest available on the market" this JLT Cold Air Kit was specially designed for GT500 Mustangs making up to 750 RWHP, but works just as well on a stock daily driver.

    Money Saving Reusable Filter. This JLT cold air intake kit comes complete with a 5" x 9" high flow reusable S&B powerstack air filter. So that means there is no need to go out and buy a new filter every few thousand miles. Now you can just clean the filter, re-oil it, save money, and go!

    Easy Installation. The JLT Performance Cold Air Intake kit was designed to install with just basic hand tools. No extra modifications or special tools are required for an easy 1 hour installation.

    Required Upgrade. Installation of this Cold Air Intake will require the use of a Mustang Handheld Tuner to reprogram the vehicles computer (ECU) for operation.

    Application. This JLT Performance Cold Air Intake is specifically designed for use on the 2007 to 2009 Shelby GT500 Mustang. An updated computer tune is required following installation.

    Technical Note: The use of a SCT SF4/X4 PowerFlash or SCT LiveWire tuner is required to reprogram the vehicles computer for this Cold Air Intake.

    Fitment: 2007 2008 2009 Details

    CA Residents: Warning: California's Proposition 65

    What's in the Box
    • (1) Intake tube
    • (1) Air filter
    • (1) Coupler
    • (2) Clamps
    • (2) Brackets
    • (1) Heat Shield/Air Box
    Installation Info
    Tech Specs
    Cold Air Intake Specifications
    Year/Model: 2007-2009 GT500 Filter Placement: Engine Bay
    Material: ABS Plastic Finish: Black
    Manufacture: JLT Computer Tune Required: Yes
    Will it fit my Mustang?

    You Might Also Like

    Customer Photos (7) Submit Your Photo

    View All 7 Photos

    Q & A

    No questions about this product yet.

    Ask the First Question

    People Who Bought This Item Also Bought

    Customer Reviews (19) Write a Review

    Overall Rating 4.8

    out of 5 stars

    Installation Time:Less than 1 Hour

    • Performance Gain 4.777778 4.8
    • Fit 4.611111 4.6



    • 5/5

      Installation Time: Less than 1 Hour

      September 06, 2018

      jlt performance big air and tune

      i installed the big air intake and metco blower pulley with tensioner on my shelby gt500 and couldnt be happier when i tuned it with the bama tuner . Runs like a scalded dog ! I would suggest a pulley puller as it came off and back on easy with the right tool, otherwise good luck as its not hard to mangle aluminum parts.

      centaur

      Year: 2009 Submodel: GT500

      Helpful (0)

    • 5/5

      Installation Time: Less than 1 Hour

      July 11, 2018

      It’s BIG!!!!

      Moved up from the older 119 to the 123 and it really fills in the engine bay. Had a crack on the old carbon fiber. This is nice and tight and the whine is fine!! Easy install took about 30 minutes. Flashed it with a tune from the BAMA boys and is running tight.

      Cableguy500

      Year: 2007 Submodel: GT500

      Helpful (2)

    • 5/5

      Installation Time: Less than 1 Hour

      July 10, 2018

      Awesome CAI

      I felt the gains immediately and I can hear the whine a lot more!

      Mike3007

      Year: 2008 Submodel: GT500

      Helpful (2)

    • 5/5

      Installation Time: Less than 1 Hour

      May 18, 2018

      Real easy install.

      Definately fetl extra power no doubt and was well worth the money.

      LeoV

      Year: 2008 Submodel: GT500

      Helpful (3)

    • 4/5

      Installation Time: Less than 1 Hour

      March 12, 2018

      It's good but..

      The CAI is nice and is what you'd expect from JLT. The fit was not as smotth as I'd have liked but it does fit. The look of the intake is just one of molded plastic nothing fancy (if not a little cheap looking). You'd think for the price JLT would fancy it up a bit. That said, it works as just intended and I can't complain about the function.

      LorrenL

      Year: 2007 Submodel: GT500

      Helpful (2)

    • 5/5

      Installation Time: Less than 1 Hour

      December 13, 2017

      JLT CAI

      The power gained from the CAI and Bama tune are very noticeable. Very easy to install and makes the engine compartment look strong and aggressive. Thanks for this awesome product, I love it.

      09mustanglover

      Year: 2008 Submodel: GT500

      Helpful (3)

    • 5/5

      Installation Time: Less than 1 Hour

      December 04, 2017

      nate's 09 500

      The kit was easy to install and looks great along with the twin 65mm Ford Performance Cobra throttle body.

      GT500Nate

      Year: 2009 Submodel: GT500

      Helpful (3)

    • 5/5

      Installation Time: Less than 1 Hour

      October 23, 2017

      Great Performance

      I had the carbon fiber JLT 110. It cracked and always had issues with staying on. So I switched to the good old plastic intake. It’s been great and I really did see the increase in boost and performance and promised. I gained 2lbs of boost.

      Michael

      Year: 2007 Submodel: GT500

      Helpful (4)

    • 5/5

      Installation Time: Less than 1 Hour

      June 19, 2017

      Great intake, great price

      Fitment was fine, about what you expect from an aftermarket intake. It takes a little finagling and a few adjustments before it's situated correctly, but once it's set you're good to go. Performance was much improved over where the car was. Naturally, this intake was installed at the same time as a tune, but I can definitely say the intake was an improvement in itself.

      Hatchke

      Year: 2007 Submodel: GT500

      Helpful (4)

    • 5/5

      Installation Time: Less than 1 Hour

      October 27, 2016

      Worth it, you can feel the difference

      I got this installed with a off-road xpipe and a tune. You can tell the power difference, it's a great bang for the buck. I recommend it to every Shelby owner (07-09)

      Shelby

      Year: 2009 Submodel: GT500

      Helpful (5)

    • 5/5

      September 16, 2016

      Killer Upgrade

      I just finished installing the JLT intake. excellent power increase with the Bama tune...can rally hear the blower now.

      chuck

      Year: 2007 Submodel: GT500

      Helpful (4)

    • 5/5

      Installation Time: Less than 1 Hour

      September 24, 2015

      Easy horsepower in just an hour

      Bought this product for my 2009 GT500 since I've had other cars with the JLT cold air intake. Very nice looking product, as always, and the parts are always all there. Took the old kit off and installed the new JLT kit in less than an hour. All parts went on smooth and easy and look great. Just went to Pro Dyno today and with this kit, a 2.6 upper, 10 lower and a off road x-pipe the car turned 612 HP and 618 TQ. WOW is all I can say. Thanks JLT and AM!!!!!!

      Brownbrat21

      Year: 2009 Submodel: GT500 Columbia, SC

      Helpful (5)

    • 5/5

      Installation Time: Afternoon

      August 21, 2015

      Great product

      I'm very pleased with this product and the quality. American muscle has great service

      09svt

      Year: 2009 Submodel: GT500 Roanoke, va

      Helpful (4)

    • 5/5

      Installation Time: Less than 1 Hour

      July 17, 2015

      Looks Great

      Easy to install and looks so much better than stock air box.

      Vistablue07ShelbyGT500

      Year: 2007 Submodel: GT500 Goodyear, AZ

      Helpful (4)

    • 5/5

      Installation Time: Less than 1 Hour

      December 13, 2013

      Very simple to install and good quality

      I have installed cold air intakes before by another manufacturer and had trouble with the fit. I had to maneuver it as the intake tube would hit the strut towers. This install was a snap. I took less than twenty minutes and that is letting my girlfriend do almost all of the work. Everything lined up as it should have for a direct replacement. Now to get out on the track!!!!

      09Shelbygt

      Year: 2009 Submodel: GT500 Ephrata, Pennsylvania

      Helpful (4)

    • 4/5

      Installation Time: Less than 1 Hour

      November 05, 2013

      Power and sound to your liking

      Installation took about 20 minutes (loaded the Bama tune at the same time). The increase in airflow is substantial when compared with the restrictive stock set-up. Gains have yet to be dyno’d but you can really feel the engine breathing better and the power is totally noticeable. Plus, the whine coming out when the charger works its magic is stunning. Worth every penny. Tips: Clean all contact surfaces with alcohol and carry a socket to tighten the set-up just in case. My air cleaner popped of twice (causing a lethal idol drop) and the intake tube popped off the coupler twice (this made me limp off the road). I read a number of solutions to this –including hairspray- but I don’t consider it a deal-killer.

      CruzGT500

      Year: 2008 Submodel: GT500 Santa Cruz, CA, USA

      Helpful (5)

    • 5/5

      Installation Time: Less than 1 Hour

      October 19, 2013

      JLT is always a winner

      This cai was super easy to install, and fits very well in the engine bay. Definitely a noticeable hp gain after install and it made the blower a lot louder! Just remember to check the sleeve around the throttle body and the end of the intake pipe after driving a bit since they do seem to get a bit loose due to the heat under the hood.

      CJSVT

      Year: 2008 Submodel: GT500 Tampa, FL, USA

      Helpful (5)

    • 4/5

      Installation Time: Less than 1 Hour

      August 26, 2013

      JLT COLD AIR

      THIS WAS INSTALLED ALONG WITH 3.73 GEARS. AND A PERFORMANE TUNE. WAS VERY SATISFIED WITH OVER ALL RESULTS

      HIPO

      Year: 2009 Submodel: GT500 FAIRMONT WV

      Helpful (3)

    • 5/5

      Installation Time: Less than 1 Hour

      July 01, 2013

      jlt cai

      Excellent product, paired with a vmp 2.59 pulley I produced 526rwhp and 528 rwtq on my 2007 Shelby gt500.

      Gary2007

      Year: 2007 Submodel: GT500 Parkersburg, WV, USA

      Helpful (5)

    Related Mustang Categories