$6,000 Giveaway! Enter Now >

SR Performance Cold Air Intake with 70mm Throttle Body (05-09 Mustang V6)

Find parts that fit my vehicle Item 99700
AmericanMuscle no longer carries the SR Performance Cold Air Intake with 70mm Throttle Body (05-09 Mustang V6). Please check out 1979-1993 Foxbody Mustang Intake for an updated selection.
Shop Owners Save More! Sign up for our dealer program

    Product Information

    Features, Description, Reviews, Q&A, Specs & Installation

    Features

    • SR Performance Cold Air Intake and Throttle Body Combo Kit
    • Increases Rear Wheel Horsepower and Torque
    • Better Throttle Response
    • 70mm SR Performance Throttle Body Included
    • Reusable High Flow Air Filter
    • NO Computer Tune Required For Operation
    • Simple Bolt-On Installation
    • Fits 2005-2009 4.0L V6 Mustangs

    Description

    More Horsepower And Torque. This SR Performance Cold Air Intake and Throttle Body Combo Kit is designed to replace the restrictive factory intake and throttle body set up for a noticeable increase in rear wheel horsepower and torque. This kit greatly improves your engines incoming airflow path to produce more useable power as well as an increase in throttle response.

    70mm Throttle Body. The stock throttle body on your 4.0L V6 Mustang is a restrictive 65mm, choking off airflow and keeping your Mustang from giving you everything it has. But the included SR Performance Throttle Body features a generous, free flowing 70mm single bore design for significantly more air to feed the fire under your hood. See more info about this throttle body - Here

    Cold Air Intake. A SR Performance Cold Air Intake improves the airflow into your Mustang's engine for more power and better gas mileage all while filtering out harmful power robbing particles. This CAI kit completely replaces your 4.0L V6 Mustangs restrictive factory air box, intake tube and paper filter element with a high flow filter assembly for a noticeable increase in rear wheel horsepower and torque. See more info about this cold air intake - Here

    No Tune Required. Unlike other Cold Air Intakes and Throttle Bodies on the market today for the 4.0L V6 Mustangs this SR Performance Kit does not require a computer re-tune for operation. The engineers at SR designed, tuned, and dyno-tested this cold air intake to improve your Pony's power using the stock tune.

    Easy Bolt-On Installation. This SR Performance Intake Combo Kit is designed to be a straight forward install with just basic hand tools. No extra modifications or special tools are required for a simple 2 hour installation. The stock OEM throttle body fasteners and o-ring are reused.

    Recommended Upgrade. Even though a re-tune is not required for operation, AmericanMuscle recommends a Bama Custom Tune with a Mustang Handheld Tuner to reprogram the vehicles computer (ECU). This will help you get the best performance possible out of your new SR Performance Combo Kit.

    Application. This SR Performance 70mm Throttle Body and Cold Air Intake Combo Kit is specifically designed to fit 2005 to 2009 Mustangs equipped with the 4.0L V6 engine.

    • Replacement Hardware – SKU U1537H

    SR Performance

    CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

    Install Details & What's in the Box

    Installation Info

    Installation Time

    (approx) 2 Hours

    Difficulty Level:

    Simple installation for anyone.

    Installation Guides

      No guide available for this part yet.

    What's in the Box

    • (1) Throttle Body
    • (1) "U" tube
    • (4) Bolts
    • (1) Air Filter
    • (1) Intake Tube
    • (1) Heat Shield
    • (1) Support Bracket
    • (4) Washers
    • (2) Nuts
    • (2) Bolts
    • (1) Rubber Trim
    • (3) Clamps
    • (1) Rubber Hose Connector
    • (1) Threaded Grommet

    Warranty

    SR Performance offers our valued customers the following Limited Warranty on all SR Performance product purchased after September 1st, 2026. What is Covered Subject to the terms, exclusions and limitations herein, and with respect only to products first sold in the United States, SR Performance warrants that its products shall be free of manufacturing defects for three (3) years from the date of initial retail purchase when the SR Performance product is installed and used on purchaser's vehicle according to supplied product installation instructions and/or warnings. This Limited Warranty is made only with respect to the initial purchaser and is not transferrable. SR Performance reveserves the right to require proof of purchase as a condition of this Limited Warranty and to make future revisions to this product or its Limited Warranty without obligation to provide notice of same to purchaser or to conform existing product to future revisions. Any change to this warranty made after purchase may be applied retroactively at the sole discretion of SR Performance.

    Click Here for Full Warranty Info

    Tech Specs

    Throttle Body Specifications
    Bore Size:70mm Single or Twin Blade:Single
    Year:2005-2010Model:4.0 V6
    Material:AluminumFinish:Cast Finish
    Manufacture:SR PerformanceComputer Tune Required:No


    Cold Air Intake Specifications
    Year/Model:2005-2009 V6Filter Placement:Engine Bay
    Material:AluminiumFinish:Black Powder Coat
    Manufacture:SR PerformanceComputer Tune Required:No
    4.3

    Customer Reviews (38)

    Questions & Answers (6)

    Post Your Question

      Most Popular from K&N