JLT Performance Cold Air Intake (03-04 Cobra)

JLT Performance Cold Air Intake (03-04 Cobra)

VIDEO: JLT Performance Cold Air Intake (03-04 Cobra)

About JLT Performance

JLT Performance Cold Air Intakes
JLT Performance is a family owned business driven by a passion for Mustangs. Owned by Jay and Lisa Tucker, JLT Performance started in 2004 with ...... READ MORE
OUR PRICE$229.99
Market Price $234.99You Save 2% ($5.00)
Item # 62011
Ships the same business day

Product Features

  • Increases of 26 to 30 RWHP
  • Better throttle response
  • Reusable S&B high flow air filter
  • Gloss Black Finish
  • Easy installation
  • Fits 2003 to 2004 SVT Cobra
More Usable Horsepower. With a JLT Cold Air Intake installed under the hood of your 2003 to 2004 SVT Cobra you can expect to see average performance gains of 26 to 30 horsepower and 9 to 14 ft-lbs of torque at the rear wheels. In addition to an increase in horsepower you will also see an impressive improvement in throttle response.

Fender Well Induction. This JLT Cold Air Intake is designed to draw in cold air from the fender well, rather than the hot engine compartment. Which reduces the incoming airs temperature for better combustion resulting in more horsepower.

Money Saving Reusable Filter. JLT Cold Air intake kits come complete with a high flow reusable S&B brand air filter. So that means there is no need to go out and buy a new filter every few thousand miles. Now you can just clean the filter, re-oil it, save money, and go!

Easy Installation. The JLT Performance Cold Air Intake kit was designed to install with just basic hand tools. No extra modifications or special tools are required for an easy 1 hour installation.

Application. This JLT Performance Cold Air Intake System is specifically designed for use on the 2003 to 2004 SVT Cobra Mustangs equipped with the Supercharged DOHC 4.6L V8 engine and does not require re-tuning the vehicles computer for operation.
Cold Air Intake Specifications
Year/Model: 03-04 Cobra Filter Placement: Inside Fender
Material: PVC Finish: Black
Manufacture: JLT Computer Tune Required: No

Installation Time:

(approx) 1 Hour

Difficulty Level:

Simple installation for anyone.

What's in the box?

Hardware included:
  • (4) Four Clamps
  • (4) Four Bolts
  • (4) Four Washers
  • (1) One Small Rubber Hose
  • (1) One Large Rubber Hose w/Stem
  • (1) One Rubber Trim Piece
  • (1) One Rubber Ring
  • (1) One Mass Air Flow Adapter

What's in the box?

Hardware included:
  • (4) Four Clamps
  • (4) Four Bolts
  • (4) Four Washers
  • (1) One Small Rubber Hose
  • (1) One Large Rubber Hose w/Stem
  • (1) One Rubber Trim Piece
  • (1) One Rubber Ring
  • (1) One Mass Air Flow Adapter
checkmark
Fitment:
  • Cobra 03, 04

Customer Reviews

4.79
  • 5/5
    JLT Cold Air Intake
    February 11, 2009
    Joseph Damman
    2004
    I recently added this to my 04 Mystic Cobra, and i gotta say, very noticable gain. Great addition to the Terminator Engine!!!!!
    0 of 0 voted this as helpful.Yes, I recommend this product.
  • 3/5
    Better Intakes out there
    February 22, 2011
    Bill
    Daily Driver
    I purchased this intake based on HP and Torque numbers reported and it does deliver! However I do not recommend driving on rainy days. My car hit a deep puddle and sucked water through the intake and stalled my Cobra in the middle of a highway! I highly recommend this intake if you dont drive your Cobra in the rain.
    0 of 0 voted this as helpful.No, I do not recommend this product.
  • 5/5
    JLT COLD AIR
    January 20, 2009
    Joaquin
    This intake is awesome. a bit of a pain to install, but definitely worth it. This thing brings out the power in a terminator. Best part about it is that it gets cooler air from the bottom of the car which makes more HP. I would recommend this intake to any cobra owner. You wont be disappointed.
    0 of 0 voted this as helpful.Yes, I recommend this product.