Free Shipping On Orders Over $49. Details

Talk to a Mustang Enthusiast
1-877-887-1105
M-F 8:30A-11P, Sat-Sun 8:30A-9P
Win $5,000 For Your Mustang! Enter Daily

JLT Performance Next Generation Ram Air Intake (03-04 Cobra)

$0.00
Market Price $293.99 You Save 12% ($34.99)
Our Price

$259.00 (each)

FREE Shipping

  • Item 62044

Will this fit your Vehicle?

In Stock Ships same business day.
Ship to: Ashburn - 20149
Sorry, please enter a valid US or CA postal code
We're sorry, zip can't be updated at this time.
    Create a list
    Add to New List

    Saved - View your saved items

    We're sorry. We couldn't save this product at this time.

    Features & Details

    • Increases of 18 to 26 More Horsepower
    • Better Throttle Response
    • Reusable S&B High Flow Air Filter
    • Black Textured 4-1/4" ID, Roto Molded ABS Plastic
    • Easy Installation
    • No Tune Required
    • CARB EO Number: D-761
    • Fits 2003-2004 4.6L V8 SVT Cobra Mustang
    More Usable Horsepower. With a JLT Performance "Next Generation" Ram Air Intake installed under the hood of your SVT Cobra you can expect to see average performance gains of 18 to 26 horsepower at the rear wheels. In addition to an increase in horsepower you will also see an impressive improvement in throttle response.

    Heat Shield Included. The JLT Performance Ram Air Intake includes a vacuum formed ABS plastic heat shield that not only looks great, but blocks out excessive under hood engine heat at low speed and idle that can rob you of power.

    Money Saving Reusable Filter. JLT ram air intake kits come complete with a 4x9 high flow reusable S&B brand air filter. So that means there is no need to go out and buy a new filter every few thousand miles. Now you can just clean the filter, re-oil it, save money, and go!

    Easy Installation. The JLT Performance "Next Generation" Ram Air Intake kit was designed to install with just basic hand tools. No extra modifications or special tools are required for an easy 1 hour installation.

    CARB Certified. Best of all this Mustang JLT Performance Cold Air Intake Kit is 50-state smog legal under Carb EO# D-671.

    Application. This JLT Performance "Next Generation" Ram Air Intake System is specifically designed for use on the 2003-2004 SVT Cobra Mustangs equipped with the Supercharged DOHC 4.6L V8 engine and does not require re-tuning the vehicles computer for operation.

    Technical Note. Will not fit with most strut tower braces.

    Fitment: 2003 2004 Details

    CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

    What's in the Box
    • JLT plastic intake tube
    • Silicone Coupler
    • Silicone reducer
    • ABS Heat Shield
    • 4x9 S&B powerstack air filter
    • MAF adapter
    • MAF adapter gasket
    • HD Clamps & all needed hardware
    Installation Info
    Tech Specs
    Ram Air Intake Specifications
    Year/Model: 2003-2004 Cobra Filter Placement: Engine Bay
    Material: ABS Finish: Black Textured
    Manufacture: JLT Performance Computer Tune Required: No
    Will it fit my Mustang?

      Customer Photos (19) Submit Your Photo

      View All 19 Photos

        Questions & Answers (8)

        5 Top Rated Questions

        does this kit come with the carb sticker?

        What is the replacement filter part number?

        • The replacement filer is SBAF49-R (sub SKU is R0233-JLT).

        Helpful (0)

        Does this come with a different maf sensor or do you just reuse the stock one, also will any of the sct mafs work with this ram style cold air?

        • This kit here would reuse the stock MAF sensor. The sct mafs will work with the ram style CAI the only extra item that would be needed would be the cone adapter item 38025. https://www.americanmuscle.com/sct-2900-maf-adapter.html

        Helpful (0)

        I just installed the CAI as instructed. Drove the car no issues. Came home washed and waxed car went to move into garage now service engine light is on. Stock tune on cars with no mods. Why would it be throwing a code now?

        • If once installed this product starts to cause you trouble, I suggest contacting American Muscle customer service so they can look into trouble shooting the issue and help come up with a solution for the problem.

        Helpful (0)

        So I have the long jlt cold air intake and was wondering if I would need a retune on my 04 cobra after installing the jlt ram air intake

        • The JLT Performance Next Generation Ram Air Intake would work with the stock tune, however, a retune would be required if you already have a tune for a different cold air intake.

        Helpful (0)
        Post Your Question
        3 More Questions
        Will this fit together with the BBK 65mm twin throttle body? ( Item # 56004) and the 2.9 Whipple Superchager? (Item#: 102486) 1 answer
        Will this fit on 2004 Saleen Models? 1 answer
        Will this fit a 4.0l whipple with crusher inlet? Rebuilding motor from bottom up, only reusing factory crank. About to pull the trigger on a 4.0l whipple. Will this intake fit the upgraded "crusher" inlet for the whipple? 1 answer

          Customer Reviews (33) Write a Review

          Overall Rating 4.8

          out of 5 stars

          Installation Time:Less than 1 Hour

          • Performance Gain 4.612903 4.6
          • Fit 4.741935 4.7



          • 5/5

            Installation Time: Less than 1 Hour

            January 20, 2019

            Nice product!!

            Install was quick and easy, car is yet to be really driven due to weather, will be tuned in spring. Paired with accufab tb, anxious to see what gains over stock are made!!

            KennethR

            Year: 2003 Submodel: Cobra

            Helpful (2)

          • 5/5

            Installation Time: Less than 1 Hour

            January 12, 2019

            JLT Intake

            Great fit and finish, never liked the fenderwell style I had previously. This one is clean and a nice upgrade to the factory intake.

            ravenknight1

            Year: 2003 Submodel: Cobra

            Helpful (2)

          • 5/5

            Installation Time: Less than 1 Hour

            December 09, 2018

            Exactly what I was looking for

            Simple install that replaces the bulky stock unit. Definitely tell a difference in power. Great product that works great in tandem with a throttle body.

            JamesH

            Year: 2003 Submodel: Cobra

            Helpful (2)

          • 5/5

            Installation Time: Less than 1 Hour

            September 21, 2018

            Great item

            I don’t actually know if my car gained any hp but it looks great

            ManuelQ

            Year: 2003 Submodel: Cobra

            Helpful (2)

          • 5/5

            Installation Time: Less than 1 Hour

            July 14, 2018

            Great intake

            This intake fits really good and it is now a lot easier to change my spark plugs vs the cold air.

            JeremyD

            Year: 2003 Submodel: Cobra

            Helpful (4)

          • 2/5

            Installation Time: Less than 1 Hour

            June 22, 2018

            JLT ram air

            Wakes up the blower whine, Filter sits on my headlight, I’ve tried adjusting, plastic cover won’t line up no matter how hard I try.

            ScreaminYellow

            Year: 2004 Submodel: Cobra

            Helpful (9)

          • 4/5

            Installation Time: Less than 1 Hour

            May 30, 2018

            Nice intake tube

            Like the intake a lot. Easy to install. Not sure a “heat shield” constitutes this being “ram air” but I did notice lower inlet air temps while driving vs the KandN chai I replaced. Very easy install. Looks nice I have no complaints. Didn’t notice a gain but I replaced a cai with this when I saw KandN wanted $80 for a replacement filter...

            Jeremy

            Year: 2004 Submodel: Cobra

            Helpful (6)

          • 5/5

            Installation Time: Less than 1 Hour

            May 15, 2018

            Great Product

            I bought this for my 03 cobra swapped fox. If anyone is curious it will work and clear the shock tower on a fox with no modification needed on a terminator swap.

            JonathanW

            Year: 2003 Submodel: Cobra

            Helpful (7)

          • 5/5

            Installation Time: Less than 1 Hour

            May 04, 2018

            Perfect

            Exactly what you expect. Quality intake that was easy to install.

            Jason

            Year: 2004 Submodel: Cobra

            Helpful (6)

          • 5/5

            Installation Time: Less than 1 Hour

            March 06, 2018

            JLT - Great Product/Great Choice

            Nicely constructed- easy to install,nice fitment. This was my 1st ‘mod’ and could tell the performance difference instantly.

            Thad

            Year: 2003 Submodel: Cobra

            Helpful (6)

          • 5/5

            Installation Time: Less than 1 Hour

            August 16, 2017

            cobra 2004

            very good look and i have made my power in the the dayno with it

            mshary

            Year: 1993 Submodel: Cobra

            Helpful (6)

          • 5/5

            Installation Time: Less than 1 Hour

            June 13, 2017

            2002 GT with kenne bell 2.6H

            Worked very well with this GT set up. Only thing that was needed to do was get more strut tower clearance. I was able to take a heat gun and warm up the plastic and slowly push in on it to get the clearance I needed. After that was done it fit perfectly as see on video. Looks clean and slick under the hood. Very pleased with it!!

            MarkG

            Year: 2002 Submodel: GT

            Helpful (7)

          • 5/5

            Installation Time: Less than 1 Hour

            June 03, 2017

            Great upgrade

            Like always shipping was fast convenient and with quality products for better performance with a ported blower....

            RobertoR

            Year: 2004 Submodel: Cobra

            Helpful (7)

          • 5/5

            Installation Time: Less than 1 Hour

            May 04, 2017

            Does what it says.

            Easiest intake install I have done. Great fit with no hassle. Great product from JLT. AM was quick to get it to me as well.

            PhilipD

            Year: 2003 Submodel: Cobra

            Helpful (8)

          • 5/5

            Installation Time: Less than 1 Hour

            April 15, 2017

            Great product!!! A

            Well worth the cost. Easy mod, good reward. Better than my KandN air intake and better fit and easier install than JLT CAI. This is the ONE to go with, in my opinion. I highly recommend this product.

            cobra187187

            Year: 2003 Submodel: Cobra

            Helpful (7)

          • 5/5

            Installation Time: Less than 1 Hour

            April 11, 2017

            Great Intake!

            Easy fitment, gained a pound of boost or so. Made the blower much louder. Better throttle response. Goodjob JLT!

            CodyS

            Year: 2003 Submodel: Cobra

            Helpful (6)

          • 5/5

            Installation Time: Less than 1 Hour

            March 20, 2017

            LOOKS GREAT! FITS GREAT!

            Super easy i stall and product performs great! American muscle had it in stock and shipped it to my door in 3 days! Best first upgrade for 03 cobra!

            ThomasK

            Year: 2003 Submodel: Cobra

            Helpful (7)

          • 5/5

            Installation Time: Less than 1 Hour

            November 07, 2016

            04 cobra

            Easy install. Doesn't rub on strut tower brace or valve covers. Would buy again.

            Mike

            Year: 2004 Submodel: Cobra

            Helpful (8)

          • 5/5

            July 07, 2016

            Great !

            This was an easy install and you can really tell the difference it makes and it makes the supercharger whine much louder. Love it !

            TayJ

            Year: 2003 Submodel: Cobra

            Helpful (8)

          • 4/5

            July 05, 2016

            jlt CAI

            So I bought the jlt CAI cause i knew it was a good brand gives my termi more air to push in through that merican supercharger. Thanks AM!

            Jaysvt

            Year: 2003 Submodel: Cobra

            Helpful (9)

          Related Mustang Categories