SR Performance Black Cold Air Intake (96-04 GT)

Customer Reviews (100+) Write a Review

Overall Rating 4.5

out of 5 stars

Installation Time:Less than 1 Hour

• Performance Gain 4.037736 4.0
• Fit 4.327103 4.3

• 5/5

  March 05, 2010

  Air intake

  Very good product. My car already had pipes on it but it really made it much louder. I can also tell that there is much more horspower

  Derek

  Helpful (10) Thanks for your input!
• 5/5

  June 29, 2010

  great deal!!!

  Great product! install was very easy, came with all the hardware need. Makes a huge difference in throttle response. Ordered it monday and it was at my door b4 I got home from work tuesday.

  Wayne

  Helpful (8) Thanks for your input!
• 4/5

  July 12, 2011

  I can feel the difference

  Shipped in two days. Went in easily enough. Only two issues were that I had to use one of my own hoses to make it fit, and it came a little different than displayed. In the display it has it coming out of the throttle body and curving in to the panel so that the filter sits horizontally. However, the one I received had an extra 90 degree welded on, so rather than sitting horizontally, my filter is sitting vertically in my fender. Had to use a pneumatic drill on the clamp to make sure it stayed. Other than that it works great. Can feel the difference in horsepower and throttle response, especially in the higher rpms.

  Brian Smith

  Year: 2001 Submodel: GT

  Helpful (6) Thanks for your input!
• 4/5

  May 27, 2010

  Pretty Good deal

  Decent product. I don't see any major downside between this CAI and the other ones from BBk and the like. Paint does scratch easily so be careful when installing it. I had to reuse one of my old hose clamps so don't throw them away until the job is done.

  Eric

  Helpful (6) Thanks for your input!
• 4/5

  January 28, 2010

  Good deal

  I chose this CAI because it has the filter in the fender, its not chrome, and the price was tough to beat. Delivery was typical for American Muscle; packaged so it didn't get damaged in shipping and fast--in other words, excellent. Installation was straight forward with the exception of some slight clearance problems with my strut tower brace. This caused a bit of adjusting and making a rubber pad to protect and quiet the spot where the intake tube and the brace contacted each other. The paint finish on the CAI looks good but is very poor quality. Even the hose clamps scratched the finish and the slightest contact with anything scratche the paint off. I'll be repainting mine with better paint or have it powder coated for looks and durability. All-in-all, I would say this is a good product.

  Chuck

  Helpful (6) Thanks for your input!
• 5/5

  April 22, 2011

  Stack Racing CAI

  I went with this CAI because i liked the idea of taking the air from outside the engine compartment. I had a K&N CAI on my old Mustang and perfomance wise they are definitly the same. Install was a little trickier than i thought it would be but still only took 45min. Also the air filter is smaller than i thought it would be so i will probably try to find a larger one that will still fit into the wheel well. This is an excellent product none the less and would put it on any future mustang. P.S. from 6000-6500 RPM it absolutely WAILS like a banshee.

  Ryan

  Year: 2004 Submodel: GT

  Helpful (5) Thanks for your input!
• 5/5

  Installation Time: Afternoon

  August 03, 2012

  Decent fit, adds some oomph

  For the money, this is a great kit. Added a little more pop off the line, and the fit was pretty good. I have the IAT sensor integrated with the MAF, so I had to plug off the extra hole in the intake with a rubber grommet from a local hardware store.

  Jim96

  Year: 1996 Submodel: Other Malvern PA

  Helpful (4) Thanks for your input!

  • Performance Gain 4

    4

  • Fit 4

    4

  • Bang for your Buck 5

    5
• 5/5

  April 06, 2011

  Excellent!

  Great product! I love it NOT being chrome or any other shinny color! Went together very simply, and in about 45 minutes total.

  Andrew Lemacks

  Year: 2004 Submodel: GT

  Helpful (3) Thanks for your input!
• 5/5

  Installation Time: Less than 1 Hour

  March 19, 2017

  Works very well

  This intake is great especially for the price! The black looks great under my hood. Fits nice and tight with no air leaks. I had a Jlt pvc design that came with my Stang and never liked the bulky pipes that seemed to come loose often and wasnt thrilled about the mass air flow sensor being in the fender. Now the sensor is were it should be, I noticed more power over the jlt and my high and hanging idle problems are GONE!

  Cook

  Year: 2000 Submodel: GT

  Helpful (2) Thanks for your input!

  • Performance Gain 5

    5

  • Fit 4

    4
• 5/5

  Installation Time: Less than 1 Hour

  January 19, 2017

  Good power slight fit issue

  I order my intake and I came in in just a couple of day like it said it would waited on my plenum and throttle body to arrive got it all here and installed have great power gains. I just had small issue with the intake where the IAC did not want to clear so it sits right on my oil filler neck it's not a big deal but it is a little annoying

  Speeddemon187

  Year: 2001 Submodel: GT

  Helpful (2) Thanks for your input!

  • Performance Gain 5

    5

  • Fit 4

    4
• 4/5

  May 02, 2016

  Saw a little performance increase

  Before I installed this intake I was running a consistent 14.2 in the quarter mile. After installation I was a consistent 14.07 with a best time of 13.90 in the quarter. Definitely a good bang for the buck install. But I was a little disappointed that they did not include enough hose clamps. I had to pull one off of the factory intake. Also since this is a universal intake that also fits the V6 motors I was disappointed that they did not include the plug for the intake air temperature sensor hole since the V8 does not use this. Even though the CAI did not come with some things and I had to either reuse or buy some additional parts I am still pleased with the overall quality and performance. I would recommend this to anyone, but would also bring it to their attention that you may have to make a trip to the parts store.

  CrowdHunter

  Year: 2004 Submodel: GT

  Helpful (2) Thanks for your input!

  • Performance Gain 3

    3

  • Fit 5

    5

  • Bang for your Buck 5

    5
• 4/5

  Installation Time: Less than 1 Hour

  March 02, 2013

  Fair product

  I used this on my 96 gt. The only complaints I have , no instructions in the box, the pipe had a few scratches out of the box, and the air filter is wrong for the pipe not a foot fitment at all. Clamps could have been a little better. Overall a good product still using on my car until I make a few upgrades to my car.

  Josh90

  Year: 1996 Submodel: GT Roanoke,VA

  Helpful (2) Thanks for your input!

  • Performance Gain 2

    2

  • Fit 1

    1

  • Bang for your Buck 4

    4
• 4/5

  Installation Time: Less than 1 Hour

  September 17, 2012

  easy install!!!

  I work in a shop for a living, and installation time was around 30 minutes. Anchor studs were a little aggravating but once everything was in, the fit was perfect. Also noticed a sound difference from the engine bay! Definitely recommend this CAI.

  Mitsuman32

  Year: 1998 Submodel: GT Nashville, TN, USA

  Helpful (2) Thanks for your input!

  • Performance Gain 3

    3

  • Fit 5

    5

  • Bang for your Buck 4

    4
• 4/5

  Installation Time: Afternoon

  August 11, 2012

  Looks good.

  I installed this intake with a little finesse. Managed to scuff some paint off the pipe where it enters the fender, so be careful during install. It certainly makes a lot more noise from the front of the car than before, but I didn't notice much of a performance difference. My car is black, and I was glad to find an intake in black for an affordable price. It looks good.

  potchez

  Year: 2001 Submodel: GT SC

  Helpful (2) Thanks for your input!

  • Performance Gain 3

    3

  • Fit 3

    3

  • Bang for your Buck 4

    4
• 4/5

  Installation Time: Afternoon

  July 15, 2012

  Good product, terrifying first run.

  Gave my car a slightly throatier sound and a bit more boost but nothing neck breaking, although this combined with a tuner surely would make that happen. I'm sure this may be obvious to many but since there are no instructions and I overlooked this small detail, it DOES matter how the nice and beefy clamps that come in the kit are positioned on the coupler that meets and connects to the throttle body. Keep the screws that tighten the clamps away from the throttle linkage/mechanism. My very first run, thankfully on a country road, the throttle got stuck at wide open throttle because of this. I tested the car in the garage before taking it out too but of course didn't do wot sitting in the garage so just beware. Very happy with this cai otherwise and great sale price!

  Emenem6

  Year: 1996 Submodel: GT Lakeville, MN, USA

  Helpful (2) Thanks for your input!

  • Performance Gain 4

    4

  • Fit 5

    5

  • Bang for your Buck 4

    4
• 4/5

  Installation Time: Afternoon

  November 24, 2011

  good stuff

  It fit and work how it said on American muscle! I will continue to purchase from them.

  Esteban562

  Year: 2003 Submodel: GT

  Helpful (2) Thanks for your input!

  • Performance Gain 4

    4

  • Fit 4

    4

  • Bang for your Buck 4

    4
• 5/5

  Installation Time: Less than 1 Hour

  October 14, 2011

  easy install - super performance

  A breeze to install. Performance right out of the box.

  steves

  Year: 2000 Submodel: GT

  Helpful (2) Thanks for your input!

  • Performance Gain 5

    5

  • Fit 5

    5

  • Bang for your Buck 4

    4
• 5/5

  December 28, 2009

  Great CAI

  Just got this for my black 03 GT. It went in easy and looks SWEET! Swapped it out for an old chrome CAI. Way better!

  Chris

  Year: 2003 Submodel: GT

  Helpful (2) Thanks for your input!
• 3/5

  Installation Time: Less than 1 Hour

  April 04, 2017

  Good for the money

  Bought this because my kandn filter was toast and this was the same price as just a filter. My one complaint is the location of the IAT hole. It makes the IAT plug wires to pinch an electrical box.

  JarodD

  Year: 1999 Submodel: GT

  Helpful (1) Thanks for your input!

  • Performance Gain 3

    3

  • Fit 3

    3
• 5/5

  Installation Time: Less than 1 Hour

  March 24, 2017

  Awesome

  Was worried at first because I was fitting my v6 mustang to a GT Mass air flow sensor. No issues. Lots more power. You notice the difference and gave it a more aggressive sound. Thanks....

  JamesW

  Year: 2000 Submodel: V6

  Helpful (1) Thanks for your input!

  • Performance Gain 5

    5

  • Fit 4

    4