Steeda Cold Air Intake (96-04 GT)

Steeda Cold Air Intake (96-04 GT)

About Steeda

Steeda Mustang Performance Products
For over 2 decades, Steeda Autosports has been the undisputed leader in Mustang performance. No other aftermarket manufacturer has won more races, set more track ...... READ MORE
OUR PRICE$284.99
Market Price $319.99You Save 11% ($35.00)
Item # 16002
Ships the same business day

Product Features

  • Increases of 10-12 RWHP
  • Improves throttle response
  • Reusable Dual Cone Filter
  • Stainless steel heat shield included
  • Fits 1996-2004 GT Mustangs
More Rear Wheel Power. By simply installing the Steeda Cold Air Intake Kit in place of the restrictive stock factory air box you can see impressive gains of 10 to 12 horsepower at the rear wheels and an improvement in throttle response all with no computer retuning required.

Reusable High Flow Air Filter. The included Steeda dual cone air filter has more surface area than competitors single cone filters to allow your Pony to breath much easier for more power. And best of all the filter is reusable, just clean it, re-oil it, save money and go.

Stainless Steel Heat Shield. Steeda knows that hot air is bad for combustion. That's why they have included a heat shield made from 304 stainless steel to reduce the intake temperature to within 5-10 degrees of the ambient air for more horsepower.

Application. This Steeda High-Flow Cold Air Intake System is specifically designed for use on the 1996 to 2004 GT Mustangs equipped with the 4.6L engine. Does not fit Bullitt Mustangs.

Technical Note: Will not fit Bullitt Mustang.

Cold Air Intake Specifications
Year/Model: 96-04 GT Filter Placement: Engine Bay
Material: Steel Finish: Matte Silver
Manufacture: Steeda Computer Tune Required: No

Installation Time:

(approx) 1 Hour

Difficulty Level:

Simple installation for anyone.

What's in the box?

Hardware included:
  • (4) Four Clamps
  • (2) Two Rubber Hose Connectors
  • (1) One Large Rubber Hose
  • (1) One Small Rubber Hose
  • (4) Four Bolts
  • (3) Three Screws
  • (4) Four Washers
  • (1) One Grommet
  • (1) One MAF Gasket

What's in the box?

Hardware included:
  • (4) Four Clamps
  • (2) Two Rubber Hose Connectors
  • (1) One Large Rubber Hose
  • (1) One Small Rubber Hose
  • (4) Four Bolts
  • (3) Three Screws
  • (4) Four Washers
  • (1) One Grommet
  • (1) One MAF Gasket
checkmark
Fitment:
  • GT 96, 97, 98, 99, 00, 01, 02, 03, 04

Customer Reviews

4.917
  • 5/5
    Very Nice
    April 23, 2011
    Jon
    2001GTDaily Driver
    I went with the Steeda cold air kit because I wanted the best of them, and I am positive that's what I got. The installation went smoothly, and the fit was great. All the parts and fittings are of very high quality. Driving it was a joy afterward, as I could hear the intake sucking in air as I fed it gas. The exhaust tone was a little bolder than it was before, too - overall an excellent product. There are other good cold air/ high flow intake kits out there, but I would buy this one 100 times again if I had to. Good stuff!
    1 of 1 voted this as helpful.Yes, I recommend this product.
  • 5/5
    2001 Mustang GT
    December 28, 2010
    Andres Navarro
    2001GTDaily Driver
    THis is the first mod i did to my mustang, felt the difference right away more power, and better gas mileage, and re-usable filter. install was easy. steeda is the best in performance parts. and AM free shipping can't be beat
    0 of 0 voted this as helpful.Yes, I recommend this product.
  • 5/5
    Great intake
    January 19, 2011
    Michael Russo
    Daily Driver
    This intake Is great quality and gives noticable improvement in throttle response. Very easy to install for anyone, took about a half hour.
    1 of 1 voted this as helpful.Yes, I recommend this product.