Talk to a Charger Sales Tech
1-877-887-1105
M-F 8:30A-11P, Sat-Sun 8:30A-9P
$20K Sweeps! 10 Chances to Win! Enter Daily >

Raxiom Axial Series LED Side Marker Lights; Clear (15-23 Charger, Excluding Widebody)

Item CR5948
Verify parts fit and get product recommendations.
Charger Sales Techs: Connect Now M-F 8:30A-11P, Sat-Sun 8:30A-9P
$0.00
On Sale

$58.99 (set of 4)

FREE Shipping on orders over $119 Market Price $72.99 You Save 19% ($14.00) Up to 10% off for Military & First Responders! See Details

Will this fit your Vehicle?

Select a different vehicle Help?
Update or Change Vehicle
Ship to: Ashburn - 20149
Sorry, please enter a valid US or CA postal code
We're sorry, zip can't be updated at this time.
Recommended Install Shops
How It Works
Install Shops are available near Ashburn - 20149

Add Local Shop Installation

Total cost of service $125.00
    Create a list
    Add to New List

    Saved - View your saved items

    We're sorry. We couldn't save this product at this time.

    or use

      Video Review & Installation

      Jake: Jake here for AmericanMuscle, and today I'm taking a look at the Raxiom Axial Series Front and Rear LED Side Marker Lights with Clear Lenses fitting 2015 and newer Chargers excluding the wide-body models. Now, Chargers look pretty mean right off the showroom floor, no one's going to debate that, but if you're looking to kick it up a notch, really lean into some of that aggressive look, these are gonna be for you. Not only do they pack a nice visual punch, but they also include some seriously upgraded lighting elements at a cool style all for a really low price.Now while looks are of course important, I think it's worth starting off talking about the actual lighting portion here. Now these come with SMD LED strips inside to give you a clean sharp line of light all the way through the lens, so there's no single point of light like there is with the factory incandescent bulbs. The whole thing here gets lit up entirely. Since these are LEDs, they're gonna have a much longer lifespan than the factory incandescent bulbs, and they're gonna be brighter, which will make a big impact on overall visibility. There is no way to miss these, especially because of the clear lenses.Now they have all the necessary hardware inside too, so there's no need for additional resistors or splicing. These aren't going to flicker or hyper-flash once they're installed. The clear lenses, I think, bring a little bit of that sleek, almost European style. And unlike the standard amber lenses on your stock market lights in the front or the red ones in the rear, these are gonna make for a much cleaner, sleeker look.Construction here is all OEM grade ABS plastic for the outer housings, and they're strong and lightweight. You've got your standard polycarbonate material here for the lens as well, and of course, these are weather-sealed to help keep out dirt and moisture and to protect those electronics inside. Like we were talking about a few moments ago, inside we've got those LEDs so these are gonna be much brighter and have that longer lifespan too. All the wiring's already done, making these a total plug-and-play operation. We'll touch more on that momentarily.Pricing will come in at just about $75, making this a really affordable modification. Now this is definitely a mod that can fit any budget. And I am a big fan of anything for $100 or less, especially if it provides you with both an aesthetic and functional improvement like these do. Installation is gonna get a one out of three on our difficulty meter and should only take you about 20 minutes to get these on your car. They're really, really easy. Just a total plug-and-play install and they utilize factory connectors here, so you don't have to do any wiring at all, just pop out your old ones, pop these guys right on in. And to show you that process now, let's head over to the install bay.Man: The tools you'll need for this project are a three-eighths drive or a quarter-inch drive ratchet, a 10-millimeter socket, a soft trim removal tool, and a T25 Torx bit. Hi, everyone. Today we're installing a set of side marker lights on our Charger, so let's get started with the uninstall first. So we're gonna start off at the rear of our Charger, and the first thing we need to do is remove three push pins out of the fender liner, one at the very bottom, one at the bottom of the light, and one at the top of the light. And we're gonna use our trim removal tool to get this done. So we use our trim removal tool and just pry this out.Do the same thing for the second one, and then the one at the top. Now we'll use our trim removal tool to reach in and just pry our fender well away from the bumper. Right where my finger is at, there's a 10-millimeter bolt, so we're gonna use our deep 10-millimeter socket to take that bolt out, and then we can pry the bumper away from the fender. Now we just reach in. Now with the 10-millimeter screw out, we should just be able to pull this away from the body like so.Now we can get access to the two T25 Torx bits that hold the light in place, and we've got one T25 Torx bit here towards the top, and another one towards the bottom. So, we'll just get those removed. Now with the screws removed, the light will come right out. Now all we have to do is press the release button on the connector here and pull it away from the light. Now you can repeat this whole process for the other side. Now to install our new light, we're basically just going to reverse the process that we used to uninstall. So we'll go ahead and plug our light in. Make sure that it snaps into place, then we can put our light in.Now we'll use our T25 Torx screw, and tighten them down with our T25 Torx bit. Now you do want to be careful, and not tighten these down too much. All right, now we can push our bumper back into place, insert our 10-millimeter bolt, and tighten it down. Now we can push our fender liner back into place and secure it using the original push pins. One at the top of the light, one at the bottom, and then one at the bottom of the fender liner. And then repeat that whole process for the other side as well. Now to uninstall the front side marker, it's going to be very similar to the rear. We've got a push pin at the bottom, one at the bottom of the light, and one up here towards the top of the bumper and the fender. So, we'll just use our trim removal tool and pop those out.We'll use a trim removal tool and pry the fender liner away. And just like the rear, there's a 10-millimeter bolt that goes this way towards the bumper that we'll need to access to get that out of the way as well. Now what we've decided to do, so to make it a little bit easier, is we've gone ahead and turned our wheels to the left and that opened things up a lot more. Now we can use our T25 Torx bit to get the two Torx bit screws at the top and bottom of the light here. And as you can see, just like the rear, the light just comes right out. And we'll do the same thing, we'll disconnect the connector here, then you can repeat this process for the other side as well.All right, now we'll go ahead and plug in our front light. Make sure it snaps into place, insert our light, and use our T25 Torx screws to secure it in. Now we can go ahead and reinstall our 10-millimeter bolt at the top, push our fender liner back into place, and reinsert our push pins. And now you can repeat that whole process for the other side as well. And that wraps up our review and install of the Raxiom Axial Series LED Side Marker Lights with the Clear Lens for the '15 to '23 Charger except wide-body. Thanks for watching, and remember for all things Charger, keep it right here at americanmuscle.com.

      Product Information

      Features, Description, Reviews, Q&A, Specs & Installation

      Features

      • Clear LED Side Markers
      • Lighting Appearance Upgrade
      • Powerful Red and Amber SMD LED Strips
      • Clear, Polycarbonate Lenses
      • Durable ABS Plastic Housings
      • Plug and Play Installation
      • Includes Front and Rear Side Markers
      • Fits 2015-2023 Dodge Charger Models, Excluding Widebody

      Description

      Lighting Appearance Upgrade. A set of Axial Clear LED Side Marker Lights is a simple and effective way to upgrade the exterior styling of your 2015-2023 Dodge Charger. These Side Marker Lights feature a razor sharp LED strip that replaces the unsightly hot spot of the factory lights. These Axial Side Marker Lights not only look great, but they are also much brighter than the weak factory incandescent lights for increased visibility day or night.

      Quality Construction. Axial manufactures its Side Marker Lights with injected molded ABS plastic housings for durability, and use clear polycarbonate lenses for exotic good looks. These Side Marker employee high output, red (rear) and amber (front) SMD LED strip lighting for super bright illumination. Axial ensures that its Side Marker Light housings are weather sealed to prevent dirt and moisture from harming the state of the art electronics found inside.

      Plug-and-Play Installation. Axial designed its LED Side Marker Lights to be a direct plug and play upgrade for your Charger's original factory lights. There is absolutely no cutting, splicing or resistors required. Just pop out the old factory side markers and disconnect the wiring harness. Plug the harness into the back of your new LED Side Markers and snap them in place of the old ones. It's that simple!

      Application. These Axial Clear LED Front and Rear Side Marker Lights are designed to fit 2015-2023 Dodge Charger models, excluding widebody. Includes front and rear side markers.

      Fitment:

      Details

      Raxiom CH7122

      CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

      Installation & What's in the Box

      Installation Info

      What's in the Box

      • (1) Front - Driver Side (Left Hand) Side Marker
      • (1) Front - Passenger Side (Right Hand) Side Marker
      • (1) Rear - Driver Side (Left Hand) Side Marker
      • (1) Rear - Passenger Side (Right Hand) Side Marker
      4.9

      Customer Reviews (500+)

        Questions & Answers

        10 More Questions

        Will It Fit My Charger

        • Daytona - 17, 18
        • Daytona 392 - 17, 18
        • GT - 18, 19, 20, 21, 22, 23
        • GT Plus - 18
        • Pursuit - 15, 16, 17, 18, 19, 20, 22, 23
        • R/T - 15, 16, 17, 18, 19, 20, 21, 22, 23
        • R/T 392 - 17, 18
        • R/T Road & Track - 15, 16
        • R/T Scat Pack - 15, 16, 17, 18
        • Scat Pack - 19, 20, 21, 22, 23
        • Scat Pack 392 Widebody - 20
        • Scat Pack Widebody - 22
        • SE - 15, 16, 17
        • SRT 392 - 15, 16, 17, 18
        • SRT Hellcat - 15, 16, 17, 18, 19, 20
        • SRT Hellcat Redeye Widebody - 21, 22, 23
        • SRT Hellcat Widebody - 20, 21, 22, 23
        • SXT - 15, 16, 17, 18, 19, 20, 21, 22, 23
        • SXT Plus - 18
        • SXT Plus Leather - 18