(approx) 1 Hour
Simple installation for anyone.
- Customer Submitted:
- How to Install a Chin Spoiler on your 2005-2009 Mustang V6
Hey I’m Justin with AmericanMuscle.com and I’m taking a closer look at the unpainted chin spoiler from CDC, fitting all 05-09 V6 Mustangs. Taking a closer look at the construction you’ll notice that CDC went with a very rugged and injection moulded urethane, which is a huge plus for a part such as this. That’s because being so low to the ground, it’s inevitable that you’re going to catch a rock, a stick or other kind of road debris that can really test the strength of any chin spoiler. Urethane is without a doubt one of the best materials you can use with regards to resisting damage, and overall durability. Again this chin spoiler is unpainted so you do have a couple of options, you can always have the spoiler painted to match your ride which will give it a more matched appearance, or you can just choose to leave the spoiler unpainted which actually looks really good, matching those factory side rocker perfectly. Install time on the chin spoiler really isn’t all that bad, of course it will help to get the front end of the car up in the air slightly, just to give yourself a little bit more room to work. You will have to drill a few holes underneath the front bumper, but it’s actually pretty easy if you use the holes already present in the chin spoiler as your template. Once you get those holes drilled go ahead and use the supplied push pin fasteners to get the chin spoiler installed. That’s it, getting everything installed should only take you about an hour. So if you’re looking to give the front end of your V6 a dramatically more aggressive appearance, then be sure to check out CDC’s unpainted front chin spoiler right here at AmericanMuscle.com
Subscribe to our YouTube Channel
Features, Description, Reviews, Q&A, Specs & Installation
Technical Note. AmericanMuscle recommends professional installation of all body parts. We also recommended test fitting these products before they are painted.
Fitment: 2005 2006 2007 2008 2009 Details
CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
November 16, 2019
It looks amazing. Not too big, not too small. Definitely not as ricey as the other chin spoilers for the v6. I love the subtlety of design and how big of an impact it makes. Great price too.Helpful (1)
October 17, 2019
CDC chin spoiler
Perfect fit for my 2008 Mustang and good price...i would recomend this for anyone looking to give your front end a cool look...Helpful (0)
September 22, 2019
Installed very simple and looks great on the car. Gave the V6 front end the little something it needed.Helpful (0)
August 29, 2019
Awsome product defiantly recommend for that enhanced look. Used 1/4inch bolts instead of the plastic plugs. Used my garages lift for installation. About 15 minutes topsHelpful (1)
August 17, 2019
This product is just amazing! The only downside is that the holes on the Chin spoiler didn't match my bumper's pre drilled holes but it takes like 10 minutes to drill new holes so it's not bad at all! I used nuts, bolts and washers instead of the push pins provided as I'm low to the ground and I didn't want the chin spoiler to fall if I scraped. It totally completes the look of your front end and it's really sturdy! Another amazing product from American muscle and I definitely recommend it!!Helpful (0)
August 16, 2019
CDC Chin Spoiler
Really adds a nice look to the front end of this car. Very easy to install and the directions were clear and concise. Left mine in the unpainted version and looks like a factory piece. Doesn't sent too low that you have worry about scraping it on anything.Helpful (1)
August 14, 2019
Bought this to replace a mmd chin spoiler that didn't last a year. Fit was dead on. I did not used the push pins that came with it but used nuts and bolts for a more secure fit. I was going to take bumper off to mount but did it with it still on car. Bolted both side mounts first and then taped it to bumper while it drilled holes into bumper for correct fit. Not as aggressive as the mmd one was but still improves the look of the front of my car, and seems to be a much better part for less money.Helpful (1)
July 08, 2019
Really easy to put on, looks great, and a decent price.Helpful (1)
June 25, 2019
Great Chin Spoiler
This chin spoiler is a great fit for my 07 Mustang V6 Convertible and looks great on the car. It matches nicely and doesn't look out of place with the factory black plastic rocker panel molding. Very easy to install, it took about an 1-1.5 hours including set up and clean up. I would recommend using 1/4" 3M double sided tape to hold it in place if you're going to install it alone. Tape is not included with the kit.Helpful (1)
June 24, 2019
Not afraid of high driveways
ABS holds up brilliant to road rash. Easy installation but would suggest rivets or bolts in addition to the double sides 3m tape for sercure fitment.Helpful (0)
I have an 08 and it has the small factory rubber one on with push pins will I still need to drill new holes?
I have this one on my 08. I removed the old factory one and used the new one as a template to drill holes. The push pins did not hold very well so I replaced them with bolts, washers and nylock nuts. no problems anymore
Any clearance issues? I have a 1.25" drop and i drive my car to school every day, where there are speed bumps, wanted to make sure there wont be issues
You will be fine with regard to speed bumps. I will caution you though...beware of parking blocks and parking up against concrete curbs etc. Make sure to stop well short of them to avoid dragging across the top of them. (experience talking here) Also beware of steep driveway approaches. But the look of the car will be much better!
Exactly what color is this spoiler when it's unpainted?
The chin spoiler is an unpainted matte black color. It is the same color as the side skirts under the doors.
Do you guys have this front spoiler in Performance white?
We offer the spoiler in the colors listed on the product page. If the color is not offered as one of the options you see on the product page, the color is not offered at all.
Can you please send me the dementions of the spoiler?
The dimensions are 65.09" x 17.91" x 4" (L x W x H).
You would use a 1/4 inch drill bit to drill the holes needed to install the chin spoiler.
No, the CDC Splitter Upgrade would not be compatible.
This would be correct the CDC Chin Spoiler will be unpainted and the SpeedForm Mustang V6 Chin Spoiler part number 11033 will be painted.
The CDC Splitter Upgrade (05-09 GT), item # 11093, (http://www.americanmuscle.com/cdc-chinspoiler-splitter-0509gt.html) is designed to fit on 2005 to 2009 GT Mustangs with the CDC Classic Chin Spoiler - Unpainted (05-09 GT), item # 11027-00, (http://www.americanmuscle.com/mustang-unpainted-chinspoiler-0509.html). The Splitter Upgrade may not be a direct bolt on to the Chin Spoiler (#11033-00).
It comes molded in a matte black finish so if that is the look you are going for no need to primer or paint. That is how I installed mine over a year ago and it still looks like the day I received it.
(approx) 1 Hour
Simple installation for anyone.
What's in the Box