How To Install A Pair of 3/16 inch Wheel & Brake Spacers on your 1994 - 2014 Mustang

1. Gather materials needed for installation 

2. Break your lug nuts loose

3. Jack your car vehicle off the ground 

4. Place a jack stand under you vehicle for support 

5. Fully loosen and take off your lug nuts

6. Take your wheel off your vehicle 

7. OPTIONAL: Place your wheel under your care for added protection in case of jack stand failure 

8. Put you new wheel and brake spacers onto your rotors

9. Put your wheel back on your car 

10. Put you lug nuts back on your wheel 

11. Remove your jack stands

12. Lower your vehicle back to the ground 

13. Fully tighten your lug nuts

14. Enjoy your added wheel and brake clearance thanks to your new 3/16 in. Wheel & Brake Spacers 

Installation instructions written by AmericanMuscle customer Laurence Arroyo 7.24.2014 ​