Guaranteed Free Delivery by 12/24! available on most items - Details

Talk to a Mustang Expert
Every day 8:30AM EST - 11:00PM EST
Win $3,000 In Mods!! Enter Daily!

Maximum Motorsports 1994-1995 Cobra Master Cylinder Installation Kit (87-93 5.0L)

AmericanMuscle no longer carries the Maximum Motorsports 1994-1995 Cobra Master Cylinder Installation Kit (87-93 5.0L). Please check out 1979-1993 Foxbody Mustang Brake Accessories for an updated selection.
This item currently can not be added to your cart. Please try again later.

Features & Details

  • Installs 94-95 Cobra Mustang Master Cylinder into 87-93 Mustang Brake System
  • Uses High-Pressure-Rated Fittings
  • Equipped w/ Pre-Bent Hard Lines
  • Detailed Follow-Through Installation
  • Fits All 1987-1993 Ford Mustang 5.0L Models
For Safety's Sake. Replacing the brakes on your Mustang is a good step in the right direction. But if you leave the same master cylinder in place, it may defeat the whole purpose. There is no other way around it, a new master cylinder needs to be installed. The Maximum Motorsports 1994-1995 Cobra Master Cylinder Installation Kit is the answer for keeping your braking system performance top notch and 100% compliant.

Cylinder Service. The kit allows the install of a 94-95 Cobra Mustang master cylinder into an 87-93 Mustang brake system with either the stock location proportioning valve or with the Maximum Motorsports Proportioning Valve Eliminator Kit (MMBAK-6). The unit comes equipped with pre-bent hard lines and uses high-pressure-rated fittings that provide a direct bolt-in action while securing your Mustang's stock brake line routing.

Installation. This master cylinder installation kit follows a detailed and follow-through step instruction. No cutting or flaring of brake lines is needed with kit installation. Note: Mustang master cylinder must be installed before installation of kit.

Application. The Maximum Motorsports 1994-1995 Cobra Master Cylinder Installation Kit is designed to fit all 1987-1993 5.0L Mustang models.

Fitment: 1987 1988 1989 1990 1991 1992 1993 Details

CA Residents: WARNING: Cancer and Reproductive Harm -

What's in the Box
  • (1) M12-1.0 to M10-1.0 Rearward Port Brake Hard Line
  • (1) M10-1.0 Tee fitting
  • (1) M10-1.0 to 3/8-24 Brake Hard Line
  • (1) M10-1.0 to 7/16-24 Forward Port Brake Hard Line
  • Installation Instructions
Installation Info
Will it fit my Mustang?

You Might Also Like

Customer Photos

Q & A

No questions about this product yet.

Ask the First Question

Customer Reviews (1) Write a Review

Overall Rating 5

out of 5 stars

  • 5/5

    April 13, 2018

    Time saver

    Convenient solution to a master-cylinder swap. Relatively inexpensive compared to time saved sourcing fittings from a part store, and making your own lines.


    Year: 1989 Submodel: GT

    Helpful (2)

Related Mustang Categories