Talk to a Sales Tech
1-877-887-1105
M-F 8:30A-11P, Sat-Sun 8:30A-9P
$20K Sweeps! 10 Chances to Win! Enter Daily >

How to Install MMD Chin Spoiler (05-09 V6) on your Ford Mustang

Installation Time

60 minutes

Tools Required
  • Phillips Screw Driver
  • Flat Head Screw Driver
  • Jack and Jack Stands
  • Drill and 1/4” Drill Bit
American Muscle
Shop Parts in this Guide

Raise and support the front of the vehicle. Remove the (8) push clips securing the factory air dam.

**Note: The air dam will not be re-installed.


Remove the (3) Phillips head screws securing the bumper to the fender liner.


Install the MMD chin spoiler using the provided 1/4" push clips in the factory holes. Secure the chin spoiler to the fender liners using the factory Phillips head screws.


Once the chin spoiler is secured in the factory locations, drill the remaining (8) holes using a 1/4" drill bit. Then install the remaining (8) 1/4" push clips.