Win $5,000 For Your Mustang! Enter Now!
Talk to a Mustang Expert
1-888-332-7930
Mon - Sun, 8:30 AM EST - 11:00 PM EST

Free Shipping On Orders Over $49. Details

MMD Hood Vent Scoops - Pre-Painted (15-17 GT)

Market Price $259.99 You Save 12% ($30.00)
Our Price

$229.99

FREE Shipping
  • Item 390992

Select Year

2017 2016 2015

Select Color

    Choose options to add to cart

    Features, Video & Details

    • Matches 2015-2017 Factory Mustang Colors
    • Painted Right Here at AmericanMuscle!
    • Dual Hood Vent Scoops
    • Clean, Muscular Styling
    • Durable, Lightweight ABS Construction
    • Easy Installation
    • Sold as a Pair
    • Fits 2015-2017 GT Mustangs with Factory Heat Extractor Hood

    Review & Installation Video

    Review & Install Video

    Hey guys Stephanie with americanmuscle.com here with an overview of the MMD hood vent scoops for the 2015 and newer Mustang. In this video we're going to go over a few things with the MMD hood vent scoops. We'll mostly be talking about the materials and construction of these hood vent scoops and the install as well. I'll go over the install in more detail later, but I can tell you right now that the install for these is easy. I'm calling this install a one out of three wrenches on the difficulty meter since there's no drilling or cutting involved. The MMD hood vent scoops are going to be something that you should check out for your S550 if you're looking for a small way to change the stock look of the car. You have a few different options when it comes to swapping out hood vents but there really isn't anything like the MMD vent scoops. These replace the OEM heat extractor vents with scoops that face forward towards the front of the car which is going to give a different look. The first thing I'll mention is that the ones that I have here with me are matte black so these aren't painted. These scoops are available pre-painted in all 2015 plus colors, so if you didn't want the matte black you can get a set of these pre-painted to match your car's color. These will install in place of the OEM hood vent using the supplied clips, studs and nuts. We'll go over that in more detail during the install. These are made from ABS plastic and ABS is often used for exterior parts for a few different reasons. First of all it's very light weight, and second of all it's a strong material that's going to hold up over time against harsh conditions that an item like a hood would see. It's also a very paintable material which is good in this case because a hood vent scoop is going to be pretty obvious on the front of your car. When it comes to price you can expect to pay right around the $200 mark for a set of these. The pre-painted sets are going to be a little bit more expensive than the matte black sets but in all honesty not by very much. This look isn't going to be for everyone as with any exterior styling piece, so if you aren't into these particular scoops you do have a few other options out there. The install, like I said earlier, is going to be a one out of three wrenches on the difficulty meter, and you're looking at an hour tops to get these installed. You only need a few basic hand tools to get this done, and you don't have to have much experience to be able to tackle this install. If you plan on getting these painted yourself, I would just make sure that you test fit them first. The hood blanket will need to come off and there are a few pieces of hardware to get the stock vents out of the way. Just be careful not to let them pop up and scratch your hood. The clip side goes into the underside of the hood vent scoop, and after that it's just a matter of peeling the backing off of the mounting lip of the hood scoop itself and pressing it into place. Wrapping things up with the MMD hood vent scoops, these are available either in matte black or pre-painted to match your S550's paint. They're made from an ABS plastic and they offer a different look than other aftermarket hood vent modifications. As always you can check them out more online right here at americanmuscle.com.

    MMD Muscular Styling. Designed to bring a breathe of fresh air to the styling of your S550 and your engine, this set of two Hood Vent Scoops by MMD are sure to please. With reversed open slots compared to the stock hood vents, these high quality upgrades bring a menacing appeal to your 2015-2017 front end. Pre-Painted to match your Mustang, these Vent Scoops will bring a smile to your face every time you take that glance back at your parked Pony.

    Painted Here to Match 2015-2017 Factory Mustang Colors. These MMD Hood Vent Scoops are painted right here at AmericanMuscle headquarters in our state of the art paint booth. Utilizing the same base coat clear coat urethane paint Ford used on the exterior of your Mustang, these Vent Scoops will match your stock color perfectly.

    Durable Construction. Created using the OEM CAD data from Ford, this set of driver and passenger side Hood Vent Scoops will fit perfectly on your 2015-2017 equipped with factory hood vents. Manufactured from molded acrylonitrile butadiene styrene (ABS) material, these vents will deliver increased airflow to your engine and will look fantastic for many years to come.

    Straight Forward Install. With a simplified process, this pair of Hood Vent Scoops can be installed on your Mustang in no more than an hour. Complete with the necessary hardware, there's no need to make any extra modifications to swap out your factory vents for these MMD beauties.

    Application. This pair of Pre-Painted MMD Hood Vent Scoops are designed to fit 2015 to 2017 GT Mustangs equipped with the factory heat extractor hood.

    Please Note. If you have a Mustang that is was equipped with Turn Signal Lights in the factory hood vents, these MMD Hood Vent Scoops will eliminate the use of those lights.

    Find Your Paint Code

    • Choose the year of your Mustang from the options above. The color choices displayed will be the only exterior paint colors available for your year Mustang. The first two letters for each color option are the paint code for your exterior color.
    • If you need to verify your paint code, look inside the door jam of your driver's side door at your VIN plate to find your exterior paint code.
    • These Hood Vent Scoops are also available Unpainted for those who like to do-it-yourself.

    Fitment: 2015 2016 2017 Details

    What's in the Box
    • (2) Hood Vent Scoops
    • (4) Clip Bolts
    Installation Info
    Will it fit my Mustang?
    • GT - 15, 16, 17

    Fits Mustangs equipped with the vented factory GT hood.

    People Who Bought This Item Also Bought

    Most Helpful Reviews

    5/5
    MMD vent hood scoops- race red pre painted

    I took my time and painted the lower side of the scoops black to hide the race red. I believe that painting the under side black brought out a depth to the hole making it look much better.

    Helpful (3)

    5/5
    Cool-er intake air!

    Love that these allow cool air to enter directly above my (open top) cold air intake inlet! The original heat extractors pulled hot air out but with the cold air intake sitting right below it actually ...

    Read More
    Helpful (3)

    Overall Rating 4.3 out of 5 stars
    Read All 33 Reviews

    Customer Photos (18) Submit Your Photo

    View All 18 Photos

    You Might Also Like

    13 Questions / 6 Answers

    Ask a Question

    I have a 2017 GT in Triple Yellow with the Black Accent Package (glossy black looking badges and rear spoiler). I also have Matte Black Rally Stripes (edges with white pin stripes). All the standard polycarbonate trim pieces have a matte black look. I want to add the MMD V series Rear Spoiler and MMD Hood Vent scoops in Black or Magnetic to add more contrast to the yellow. What color would you suggest to match up with one of the existing blacks - Black, Shadow Black or Magnetic Metal?

    Dirk

    • The color option will absolutely be your choice over all but if you would like an option for glossy straight black for your MMD Hood Vent Scoops, I would suggest the Black- UA paint code. This will allow for a straight black gloss finish.

      AMCoal

    Helpful (0)

    Is this avaible in the 2017 limited white platinum paint color?

    AndrewB

    • We currently do not have the MMD Hood Vent Scoops available in the White Platinum Metallic at this time.

      AMBill

    Helpful (0)

    The current heat extractor vents have a "screen", I assume to prevent any road debris from getting in the engine compartment. The MMD vents will be facing forward...with no screen... and I understand the rain coming in but what about the potential for debris?

    RJ

    • There would still be a potential for debris with the factory ones as well as these MMD hood vent scoops, however, the opening is small enough to where nothing large to cause harm would enter the engine bay.

      AMjordan

    Helpful (0)

    Is there enough surface area on the backside of these scoops to apply 2 way tape and mount them on a hood with no existing factory scoops?Thanks.

    JoeB

    • There is some surface area on the backside of the MMD Hood Vent Scoops but seeing as that was not the way it was meant to be attached, so we unfortunately can not guarantee that it will stay attached.

      AMJEFF

    Helpful (0)

    Has anyone with these installed seen any significant increase or decrease in intake air temp? Cylinder head temp? Thanks.

    kyleS550

    • These will reduce the intake air temps once it is installed.

      KevinD92

    Helpful (0)

    These facing the opposite way would allow air to rush in while driving. What about rain??

    CameronR

    • The MMD Hood Vent Scoops will allow air into the engine bay as well as rain water, however due to the angle, the rainwater allowed in would be minimized, and this will not fall onto anything directly that is not waterproof or water resistant.

      Rob D

    Helpful (0)

    More Products You Might Like

    Customer Reviews (33) Write a Review

    Overall Rating 4.3

    out of 5 stars

    Installation Time:Less than 1 Hour

    • Fit 3.6 3.6
    • Appearance 4.76 4.8
    • Bang For Your Buck 4.16 4.2
    • Color Match 4.7 4.7
    • Fit & Finish 4.1 4.1



    • 2/5

      Installation Time: Less than 1 Hour

      July 10, 2017

      Looks Great

      They looked awesome on my 2016 mustang gt. Then I went for a test drive and was disappointed when over 80mph they would lift in the rear corners, I did not use the 3M tape because the instructions said it was optional, So I took them off install 3M tape and I could never get them to seat properly afterwards. So with my frustrations I took them off and now they're sitting on the shelf in my garage. I think a screw in the rear of the vents would have solve these issues so I'm not too fond of the craftsmanship. By the way my car is Ruby Red and as advertised the color does not match perfectly.

      MarkG

      Year: 2016 Submodel: GT

      Helpful (3)

    • 5/5

      Installation Time: Weekend

      June 24, 2017

      MMD vent hood scoops- race red pre painted

      I took my time and painted the lower side of the scoops black to hide the race red. I believe that painting the under side black brought out a depth to the hole making it look much better.

      MichaelR

      Year: 2015 Submodel: GT

      Helpful (3)

    • 5/5

      Installation Time: Less than 1 Hour

      January 02, 2017

      Cool-er intake air!

      Love that these allow cool air to enter directly above my (open top) cold air intake inlet! The original heat extractors pulled hot air out but with the cold air intake sitting right below it actually pulled the hot air right into the inflow path of the intake when stopped or going through a drive thru. In my case these scoops reduce intake air temps in both how long it takes for heat to start soaking and how quickly the temps go back down once moving again.

      6Bolt

      Year: 2015 Submodel: GT

      Helpful (3)

    • 5/5

      September 14, 2016

      This really stands out

      If you want your pony to look special them this is a must buy. Great mod

      Sunny

      Year: 2016 Submodel: GT

      Helpful (3)

    • 3/5

      Installation Time: Less than 1 Hour

      July 26, 2017

      Warping hood scoops

      I got these last year, I love the look and also with the JLT CAI air is forced in through them. Of lately I'm noticing the 2 back outside corners don't sit flat to the hood. Now I'm noticing I'm having the same issue with the front outside. Not happy with the look, I will be calling A/M soon

      mrducts

      Year: 2015 Submodel: GT

      Helpful (2)

    • 3/5

      Installation Time: Afternoon

      July 24, 2017

      2015 RR not a perfect color match

      looks great. not a perfect color match. Tried to return them but I was told since my car was 2 years old, the color has faded that's why the hood scoops didn't match. Because I ordered them pre-painted they wouldn't let me return them. my car has 5500 miles on it and it has always been garaged. I will not buy anything pre-painted again unless its black.

      TerryF

      Year: 2015 Submodel: GT

      Helpful (2)

    • 4/5

      Installation Time: Less than 1 Hour

      July 09, 2017

      Great look on the car!

      Great look and fit. the only issue I have is when the hood gets hot the front edge of the hood vent turns up a bit and leaves a bit of a lip. Once cooled it returns to shape. Other than that great aggressive look.

      P51GT

      Year: 2015 Submodel: GT

      Helpful (2)

    • 5/5

      Installation Time: Less than 1 Hour

      June 24, 2017

      Excellent Scoops

      Look great, easy to follow instructions and easy to install.

      JamesD

      Year: 2015 Submodel: GT

      Helpful (2)

    • 5/5

      Installation Time: Less than 1 Hour

      April 28, 2017

      A little icing for the cake

      Was a little apprehensive about my mustangs look since I already have the MMD scoop on the hood but now that I installed these I love the aggressive look the car has have received many compliments Great product simple install

      Markxx

      Year: 2016 Submodel: GT

      Helpful (2)

    • 5/5

      Installation Time: Less than 1 Hour

      April 15, 2017

      Hood vent scoops

      Easy install only took about 30 min. Looks great. No flaws in the paint.

      Chrish1972

      Year: 2016 Submodel: GT

      Helpful (2)

    • 4/5

      Installation Time: Less than 1 Hour

      April 08, 2017

      Review from MMD Hood Vent Scoops - Unpainted (15-17 GT)

      Flavor

      I'll recommend it those mustang owners who aren't trying to Rice out their mustangs it will give that Medium that's inbetween modern / Classic look not to much but makes a difference color Match as well came Good Good Product

      McMurphy

      Year: 2015 Submodel: GT

      Helpful (2)

    • 5/5

      Installation Time: Less than 1 Hour

      March 19, 2017

      Great product

      Installation was easy and product looks great. Color match was perfect.

      Mike

      Year: 2015 Submodel: GT

      Helpful (2)

    • 5/5

      Installation Time: Less than 1 Hour

      January 26, 2017

      Old school flare

      The color almost matched perfectly on my ruby red 15 GT but the outcome gave it a mean aggressive old school style

      Juan

      Year: 2015 Submodel: GT

      Helpful (2)

    • 5/5

      Installation Time: Less than 1 Hour

      December 15, 2016

      Looks wicked!

      These look awesome. Completely changes the look of the hood. Really aggressive. My only complaint was the "tape" on the backside clip was horrible. I had to scrape it off and replace it.

      Nick

      Year: 2016 Submodel: GT

      Helpful (2)

    • 4/5

      September 26, 2016

      Review from MMD Hood Vent Scoops - Matte Black (15-17 GT)

      Easy instillation. Good Product.

      The scoops seem to be good quality. Instillation took only 30min. For the price I dont see why the product doesnt have a vent screen in the opening like the stock vents on the GT. Over all good product and improved look on my 2015 Mustang.

      TheLeminator

      Year: 2015 Submodel: GT

      Helpful (2)

    • 4/5

      September 23, 2016

      Review from MMD Hood Vent Scoops - Matte Black (15-17 GT)

      Looks great, minor flaws

      I love the way they look, however the left piece had some kind of marring/plastic defect on the middle of the top. They are not markings that you can feel, but you can see them in different angles of light. I assume this is from the plastic molding process and something you risk when getting plastic pieces, as these were packed well. For the price and design, these would still be my go to as you don't have to make modifications(like the Roush vents) and they are almost half the price of the carbon fiber stock style vents.

      Cuthbert

      Year: 2015 Submodel: GT

      Helpful (2)

    • 5/5

      September 23, 2016

      Review from MMD Hood Vent Scoops - Matte Black (15-17 GT)

      Awesome look!

      I love these scoops. I had a hard time deciding on vents for the first year or so, but these have just enough of a subtle, almost stock look, and just enough difference by pointing out instead of back. The opening is HUGE, and they look aggressive!

      suckerv

      Year: 2015 Submodel: GT

      Helpful (2)

    • 5/5

      September 14, 2016

      Review from MMD Hood Vent Scoops - Matte Black (15-17 GT)

      Totally changes the stock hood

      Totally changes the look of the stock hood. Make sure you plasti dip the opening in your hood black or the color of your car will show through. Unless you are going for that look.

      RubyRedGT

      Year: 2016 Submodel: GT

      Helpful (2)

    • 5/5

      September 14, 2016

      MMD Hood Scoops!

      First off awesome quality and paint match from MMD, and amazing customer service from American Muscle during ordering. I've been looking at vent replacements for awhile but nothing had really caught my eye till I found these! Install wasn't to bad at all but it would be a good idea to have an extra set of hands to help hold the vent while getting the hardware started. Overall extremely satisfied and would highly recommend!

      Burge

      Year: 2016 Submodel: GT

      Helpful (2)

    • 5/5

      September 13, 2016

      Review from MMD Hood Vent Scoops - Matte Black (15-17 GT)

      Amazing Vent Scoops

      These Vent Scoops look amazing. Really enhance the look of my car. Thanks AM :)

      Jay

      Year: 2015 Submodel: GT

      Helpful (2)

    Related Mustang Categories