$7,000 Summertime Mustang Build Enter Now!
Talk to a Mustang Expert
1-888-332-7930
Mon - Sun, 8:30 AM EST - 11:00 PM EST

Free Shipping On Orders Over $49. Details

Raxiom LED Rear Turn Signal Bulbs (94-09 All)

Market Price $44.80 You Save 11% ($4.80)
Our Price

$40.00 (pair)

FREE Shipping on orders over $49
  • Item 393041
  • MPN# 393041

In Stock Ships same business day. Choose options to add to cart

Features & Details

  • 3157 LED Replacement Bulbs
  • Much Brighter than Stock
  • Aluminum Base
  • Red Coloring
  • 280 Lumens Output
  • Plug and Play Installation
  • Fits 1994-2009 Mustangs
Red Turn Signal LEDs. Modernize your Mustang with some long lasting LED lighting. These Raxiom 3157 Rear Turn Signal Bulbs were crafted as a direct fit upgrade, delivering 280 lumens of red light that will last much longer than factory halogens. Providing an even diffusion of red lighting, this pair of LED replacements will look great on the back of your 1994-2009 Mustang.

Quality Construction. Incorporating 48 high-powered LEDs, these non-polarized Rear Turn Signal Bulbs by Raxiom feature durable injection molded terminals and an aluminum base to deliver maximum heatsink. With an embedded feature preventing surge blowout and an implant to aid against reverse polarity, these Raxiom Rear Turn Signal LEDs are an exceptional upgrade over stock.

Simple Install. These LED Rear Turn Signal Bulbs are a direct fit upgrade for the weak factory halogen bulbs installed by Ford. Simply remove your stock bulbs and plug these Raxiom LEDs right in their place. Swapping out your factory turn signal bulbs couldn't get any easier.

Application. This set of Raxiom 3157 LED Rear Turn Signal Light Bulbs are a direct replacement on 1994-2009 Mustangs, including the V6, GT, Bullitt, Mach 1, Cobra and GT500 models.

Fitment: 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 Details

What's in the Box
  • (2) LED Bulbs
Installation Info
Tech Specs
Will it fit my Mustang?
  • Cobra - 94, 95, 96, 97, 98, 99, 01, 03, 04
  • GT - 94, 95, 96, 97, 98, 99, 00, 01, 02, 03, 04, 05, 06, 07, 08, 09
  • V6 - 94, 95, 96, 97, 98, 99, 00, 01, 02, 03, 04, 05, 06, 07, 08, 09
  • Bullitt - 01, 08, 09
  • Mach 1 - 03, 04
  • GT500 - 07, 08, 09

People Who Bought This Item Also Bought

Most Helpful Reviews

5/5
Great!

Replaced old leds on my 2007 GT and these are much brighter. When the turn signals kick in they are real bright. I have the sequentials and they work well. Great replacement. Wish I had them earlier.

Helpful (1)

5/5
Really good product

Two times brighter than your original tail lights would highly reccomend plus it looks like a new car

Helpful (1)

Overall Rating 3.8 out of 5 stars
Read All 5 Reviews

Customer Photos (1) Submit Your Photo

View 1 Photo

You Might Also Like

7 Questions / 4 Answers

Ask a Question

Can anyone tell me what type, impedance of resistor is required? Where it needs to be installed? I have Item 393042, Item 49213 and Item 49136 in addition to these lights. Can anyone point me in the right direction to eliminate the hyper flashing and make my center brake light not stay lit? I'm using Item 388878 too.

AmericanAsHell

Hello I have the 99-04 Raxiom Icon LED taillights with the sequential kit. The brake/turn signals are halogen bulbs and I'm considering upgrading them to LED's. Would these work well on my setup even tho I have switchback LED turn signals on my headlights? I don't have any issues with them since I have a v1 modifier turn signal flasher installed to slow down the sequence.

Chris

Do I need resistors for these or is the V2 flash modifier enough? Im not using a sequential kit but I am switching all of my lighting to LED. Also i assume I have to buy 3 sets of these since the tail lights have 3 each?

BB

  • The Raxiom Modified Turn Signal Flasher V2 only slows down the sequence of sequential tail lights, so if you don't have sequential tail lights, you wouldn't need it. I would recommend using resistors to slow down the flashing of the turn signals. You would need 3 pairs of the Raxiom LED Rear Turn Signal Bulbs since there are 6 bulbs in the back.

    pserafi

Helpful (0)

Do these light bulbs requires installing resistors to function properly?

NicePony1

  • Typically, if this would be the only LED add-on on your vehicle, resistors would not be required, however, since LED's use less current, the unused power must be sent elsewhere, and it could cause hyper-flashing, or send additional current somewhere else. If your vehicle is equipped with other aftermarket LED's that do not have resistors, the installation of another LED product may result in hyper-flashing, and resistors would be required in that case.

    AMJEFF

Helpful (0)

How do these compare to the LEDs from the Raxiom LED Tail Light Conversion Kit? I tried the original Raxiom LED Tail Light Conversion Kit and the regular incandescent bulbs were still much brighter than those LEDs. How much brighter/How many more lumens are these LEDs compared to the old LEDs? I also tried the Raxiom LED Sequential Tail Light Kit - Plug-and-Play, and those did not sequence when Hazard lights were on. Do these new LEDs sequence when the Hazards are on?

Noone

  • The Raxiom LED Rear Turn Signal Bulbs are different bulbs from the LED Tail Light Conversion Kit. These LEDs will be brighter than the ones that came in the Kit, as well as the stock bulbs. Unfortunately, the Raxiom LED Sequential Tail Light Kit - Plug-and-Play (96-04 All; Excludes 99-01 Cobra), item # 49222, (http://www.americanmuscle.com/raxiom-led-sequential-taillights-9604.html) is not compatible with LED replacement tail lights.

    AshleyK

Helpful (0)

Do these bulbs work with the sequential tail light kit and flasher???

ChuckieT

  • The Raxiom LED Rear Turn Signal Bulbs (94-09 All) is compatible with the sequential harness but you are going to need the Raxiom Modified Turn Signal Flasher V2 - LED (96-04 All; Excludes 99-01 Cobra) item #388878 (www.americanmuscle.com/raxiom-signal-relay-v2-9604.html) runs a different frequency than the V1 (non LED). Also, this item comes with 2 bulbs per unit.

    JeffAM

Helpful (0)

More Products You Might Like

Customer Reviews (5) Write a Review

Overall Rating 3.8

out of 5 stars

Installation Time:Less than 1 Hour

  • Visibility 3.666667 3.7
  • Fit 5 5
  • Appearance 3.666667 3.7
  • Bang For Your Buck 3 3



  • 3/5

    Installation Time: Less than 1 Hour

    February 02, 2017

    LED running brake turn bulbs

    Bulbs are expensive 2 out of 6 had issues so bought different ones at the auto parts store problem solved. returning the two with issues

    Rick

    Year: 1995 Submodel: GT

    Helpful (1)

  • 5/5

    Installation Time: Less than 1 Hour

    December 02, 2016

    Great!

    Replaced old leds on my 2007 GT and these are much brighter. When the turn signals kick in they are real bright. I have the sequentials and they work well. Great replacement. Wish I had them earlier.

    Gowa69

    Year: 2007 Submodel: GT

    Helpful (1)

  • 1/5

    Installation Time: Less than 1 Hour

    November 21, 2016

    No difference on raxiom icon taillights

    If you own raxiom icon tailights and want to get more brightness these are definitely not the lights to pursue. Didn't make a difference at all on mine

    Sal

    Year: 2003 Submodel: GT

    Helpful (1)

  • 5/5

    September 27, 2016

    Really good product

    Two times brighter than your original tail lights would highly reccomend plus it looks like a new car

    Chris

    Year: 2002 Submodel: V6

    Helpful (1)

  • 5/5

    September 25, 2016

    Great Product

    Ordered several items for my 2003 GT. Delivered Fast. Great Quality

    03Stang

    Year: 2003 Submodel: GT

    Helpful (1)

Related Mustang Categories