Talk to an Americanmuscle Rep
Mon - Sun, 8:30 AM EST - 11:00 PM EST

Free Shipping On Orders Over $49. Details

How to Install a Grille Pillar Blackout on Your 2005-2009 GT or V6 Mustang

Installation Time

30 minutes

Tools Required
  • Spray bottle with dish soap & water solution
  • Plastic squeegee (included)
  • Heat Gun or Hair Dryer
American Muscle
Shop Parts in this Guide


Note: Although V6 & GT blackouts have different part numbers, the following instructions apply for both.

Step 1:

Thoroughly spray the grille pillar with the soap and water solution.

Step 2:

Peel the vinyl away from the adhesive backing and place it on the grille pillar as shown.

Step 3:

Using the supplied plastic squeegee, push any air bubbles out towards the edges of the vinyl.

Step 4:

Use a heat gun or hair dryer to slightly heat the vinyl and wrap it around the edges of the pillar as shown.

Step 5:

Repeat for opposite side to complete the installation.

Related Guides