Free Shipping On Orders Over $49. Details

Talk to a Mustang Expert
1-877-887-1105
Mon - Sun, 8:30 AM EST - 11:00 PM EST
Win 1 of 2 $15,000 Mustang Builds! Enter To Win!

American Muscle Graphics Grille Pillar Blackout - Matte Black (05-09 GT)

Market Price $39.99 You Save 13% ($5.00)
Starting At

$34.99

FREE Shipping on orders over $49
  • Item 26114
  • MPN# 26114

Local Install Shops

Quoted installation from $125

View 3 Shops

near 19355 (change)

Sorry, please enter a valid US or CA postal code
We're sorry, zip can't be updated at this time.

Will this fit your Mustang?

In Stock Ships same business day.
Ship to: ASHBURN - 20146
Sorry, please enter a valid US or CA postal code
We're sorry, zip can't be updated at this time.
    Create a list
    Add to New List

    Saved - View your saved items

    We're sorry. We couldn't save this product at this time.

    Features & Details

    • Aggressive 2010 GT Styling
    • Premium Cast Matte Black Vinyl Material
    • Comes in 2 Pre-Cut Sections for Easy Installation
    • Fits 2005 to 2009 GT Mustangs
    2010 GT styling. Now you can give the front end of your GT Pony the same fierce styling as the redesigned 2010 GT with a set of grille Pillar Blackout Decals from AmericanMuscle. These decals "black out" the pillars on either side of the GT's grille for an aggressive appearance.

    Perfect Fit Guaranteed. Our vinyl designs have been test fit, refined, and tested again on our very own fleet of vehicles to assure a perfect fit every time.

    Superior Quality Materials. Made from the highest quality Premium Cast Vinyl available on the market today - designed to last at least 8 years of harsh outdoor weather. They are far more durable than our competitors cheap, calendared vinyl film which starts to degrade in just a couple of years!

    Application. This pair of high quality matte black vinyl grille Pillar Blackout decals will fit the 2005 to 2009 GT Mustangs with the stock front fascia.

    Fitment: 2005 2006 2007 2008 2009 Details

    What's in the Box
    • (2) Grille Piller Blackouts
      Tools included:
    • (1) Squeege
    Installation Info
    Tech Specs
    Will it fit my Mustang?

    You Might Also Like

    Customer Photos (19) Submit Your Photo

    View All 19 Photos

    More Products You Might Like

    2 Questions / 4 Answers

    Ask a Question

    Are these matte black or gloss black?

    IsaiasR

    • This Grille Pillar Blackout is in a matte black finish.

      AMJEFF

    Helpful (0)

    Could I make this fit on my 05 V6 Mustang, if not could I make it fit by carefully cutting off parts of it ?

    Ethan1

    • This is designed for the GT. Item # 26115 is designed for the 05-09 V6.

      RyanAM12

    Show 2 more answers Helpful (0)

    People Who Bought This Item Also Bought

    Customer Reviews (19) Write a Review

    Overall Rating 4.5

    out of 5 stars

    Installation Time:Less than 1 Hour

    Installation Cost:0-$100

    • Fit 3.736842 3.7
    • Appearance 4.842105 4.8
    • Bang For Your Buck 4.210526 4.2



    • 5/5

      Installation Time: Less than 1 Hour

      April 26, 2018

      Chin spoiler

      The CDC chin spoiler is pretty awesome, easy peasy install. Change's the look of the car instantly, very nice addition.

      MarcusG

      Year: 2008 Submodel: GT

      Helpful (1)

    • 3/5

      Installation Time: Shop Install

      Installation Cost: 0-$100

      July 18, 2017

      Not cut to fit

      I love the look, but they're not sized to fit out of the box. You will have to cut it to get a proper fit which is a hassle.

      AaronC

      Year: 2007 Submodel: GT

      Helpful (2)

    • 4/5

      Installation Time: Less than 1 Hour

      June 12, 2017

      Blackout Front End

      Really unique look. Changes the whole look of the front end. You can't even tell they are decals, even up close. Make sure you are careful on the install because they can mess up really easy. I have had mine on for over e year with no problems.

      NicholasB

      Year: 2006 Submodel: GT

      Helpful (2)

    • 5/5

      Installation Time: Less than 1 Hour

      June 05, 2017

      Nice look!

      Not too bad to put on, I used a heat gun to help out. Gives the car a great look!

      MsStang

      Year: 2007 Submodel: GT

      Helpful (3)

    • 5/5

      April 21, 2017

      Great for the money

      Easy to install and add a brand new look to the pony

      CalebL

      Year: 2009 Submodel: GT

      Helpful (3)

    • 5/5

      Installation Time: Less than 1 Hour

      November 28, 2016

      Love it!

      Definitely a good product if you're looking into changing up the front end a little bit!

      matts197

      Year: 2005 Submodel: GT

      Helpful (3)

    • 5/5

      Installation Time: Less than 1 Hour

      August 09, 2015

      NICE ADDITION BUT A LITTLE PRICY

      This product was not as hard as some of the other reviews said to install. I though the fit was very good and had to do minimal trimming after the install. Use plenty of soapy water and a hair drier to help in the end. It did take me a little over and hour as I was pretty cautious with my layout and pulled the grilled off and loosened the headlights to have more working room to wrap the decals. Very pleased with final results but should only cost about $14.99 to $19..99 max.

      CoachEz

      Submodel: GT Pensacola Fl

      Helpful (3)

    • 5/5

      Installation Time: Afternoon

      February 16, 2015

      Great Product for GREAT Appearance

      Got these decals in and within 2 hours I had them on. Taking the bumper off was the most time consuming part. It is nice to have an extra set of hands so you can manipulate the decal and still get the bubbles out. Overall great appearance upgrade!

      Manny0291

      Year: 2006 Submodel: GT Saint Rose, LA

      Helpful (2)

    • 4/5

      Installation Time: Less than 1 Hour

      August 14, 2014

      Great look!

      These are one of those little things you add to your car and people can't quite figure out why your car looks so different from the other Mustangs. It sure makes a difference when added with the Black Billet Grille. The vinyl material is top quality. Looks as if it was painted once you smooth out the air bubbles. My one tip is to make sure and use a hair dryer on low heat. Not high heat. It will stretch and ruin the vinyl. The fit I would give an 8 out of 10. It is a little over-sized and I had to trim just a little. Having said that, I would rather it be too much than not enough. Very, very happy with this inexpensive mod!

      poshizzle

      Year: 2007 Submodel: GT Dallas, TX, USA

      Helpful (3)

    • 5/5

      Installation Time: Less than 1 Hour

      February 09, 2014

      Great Product With Poor Instructions

      Great product, but needs a little help with the instructions. I read most of the reviews and agree that at first the decals look too big. In fact, if you look at the customer pictures there are two different decals. One doesn't wrap around the pillar edges and the other does. The newest decal wraps around the pillar edges and is bigger than the older style. After spending a few moments comparing the pillar and decal, I figured out what needed to be done. Two things are most important when installing the decal, using a soap/water mixture and a hair dryer. Starting on the driver's side pillar; clean the pillar including the edges along the headlight and grille. Removing the driver's side decal from the sheet, spray the back of the decal and the pillar with the soap/water mixture. Line up the decal along the bottom edge of the pillar and about 1/8" down from the top. Leave about 1/2" of decal overhanging along the right side edge of the pillar next to the headlight. The extra decal will wrap around the pillar later. Next, using the provided squeegee, remove the air and water from under the decal on the flat front face of the pillar. You should now have about 1/2" of decal overhanging on the right side and about 3/4" on the left with the top and bottom aligned as described above. Now use a hair dryer along both overhanging edges to work the decal on both sides of the pillar. Use your fingers to remove the air and water from under the decal as you work the decal around the edges. Take your time and be careful not to burn your hand. Within a few minutes the decal will form to the rounded edges and curves on the pillar. Repeat on the passenger side pillar.

      BigDaddyP

      Year: 2009 Submodel: GT Houston, TX

      Helpful (4)

    • 5/5

      Installation Time: Less than 1 Hour

      June 24, 2013

      Great look

      These pillar blackouts look amazing, my blacked out front couldn't work without them. They are a bit of a pain to fit, however so if you have the stock grill have a razor blade handy for some trimming. Otherwise, great product!

      silvershiela

      Year: 2005 Submodel: GT

      Helpful (2)

    • 1/5

      Installation Time: Less than 1 Hour

      April 19, 2013

      Not much bang for your buck here

      This product it extremely expensive for not much Does not install well. Not forgiving at all. Tears very easily Is not sized correctly and cannot tuck into the sides of grille area without EXTREME caution and it will tear even in extremely warm temp with a hair dryer I could not get it to conform well

      Riclem

      Year: 2006 Submodel: GT Ct

      Helpful (3)

      • Response from AmericanMuscle

        If you're using the soap and water solution during install, they shouldn't tear on you. I'm sorry you had these problems, but if you'd like to attempt another set, we will gladly have that shipped out for you. Please give our customer service a call and let us know!

        Lisa, Customer Care

    • 4/5

      Installation Time: Less than 1 Hour

      March 22, 2013

      Nice easy improvement.

      A lot easier to line up when you remove the fascia. Also these appear large in your hand but that's because they should wrap around your pillars enough to hide the paint color around your head lights and grille. Great product and fast service. Thanks AM.

      TravisMarbles

      Year: 2005 Submodel: GT Texas

      Helpful (2)

    • 5/5

      Installation Time: Less than 1 Hour

      November 08, 2012

      Grille Pillars Blackout

      These blackout pillars took the apperance of my car to the next level. They're just what i needed. I would greatly recommend if you want that aggresive look!!!

      bluedemon915

      Year: 2008 Submodel: GT EL PASO

      Helpful (3)

    • 5/5

      Installation Time: Less than 1 Hour

      July 27, 2012

      pillar blackout

      The pillar blackouts are a great addition to the appearance or my car. Mustangs are defined by their front grill. It adds more character and a personal touch to it that makes it even more me. It was very installable. No need to take the day off or bring in a professional. It took me about an hr, and I'm not good with instructions.

      Prototype

      Year: 2007 Submodel: GT Los Angeles, CA, USA

      Helpful (3)

    • 4/5

      Installation Time: Less than 1 Hour

      May 23, 2012

      Grab That Aggressive 2010 Look

      First off, these decals do exactly what the description claims they will do. They give your entire front a more 2010+ look which is exactly what I wanted to accomplish on my 2005 white GT. Once they are on they do a great job of blending in and they really grab those second looks from passers-by. They stick easily with the soapy mix and any air bubbles were easily squeegeed out. The bad news was that they were entirely too wide for my pillars. When I first received them, I went to put them on and was taken aback by how large they were. My pillars were roughly 2" across from the edge of the headlight to the edge of the grille. In contrast, each of these pillar decals were an easy 3"+ across, leaving WAY too much excess on either side of the pillar once they are put in place. To further complicate things, their really is not much room to "wrap" the decal around the sides without taking the headlights and grille off. I contacted AM and they said they thought I had maybe received some that were cut wrong and very promptly shipped me another set. However, these were the exact same size! I ended up being able to squeeze one side of the decal in between the pillar and headlight and then on the grille side I simply took a razor and cut them to the edge, removed the excess and sat the decals flush to the grille. This was a workable solution, but in my mind should not have o be done. AM may need to recheck the widths of these decals. Other than the sizing issue they look fantastic when they are on! Price is a bit too high in my opinion as well, and should be more around the $19.99 mark. In the end they do accomplish the job though! Thanks AM!

      Nick27

      Year: 2005 Submodel: GT Springfield, MO, USA

      Helpful (5)

    • 5/5

      Installation Time: Less than 1 Hour

      April 27, 2012

      Cool

      I liked these at first and then as time passed the look really started to grow on me now I love them the fit was ok I had to trim a little off the sides but that was easy I recommend this product!!

      Hayden15

      Year: 2008 Submodel: GT Blanchard, ID 83804, USA

      Helpful (3)

    • 5/5

      Installation Time: Less than 1 Hour

      March 26, 2012

      Pillar black out

      I have an 2008 white GT/CS. I put the piller black outs on in 10 minutes. With blacked out grill pony they look great. Ron

      Ronnie

      Year: 2008 Submodel: GT Sarasota, FL

      Helpful (3)

    • 5/5

      Installation Time: Less than 1 Hour

      August 24, 2011

      Easy install and great look!

      I bought these to put on a 2009 Candy Apple Red GT. They stuck right on with no issue and the fit was perfect. It really changed the look of the front. Mainly it makes the grille look a little wider like it goes straight over to the headlights. Great appearance modification for the cost.

      Bill

      Year: 2009 Submodel: GT

      Helpful (5)