Safe Jack 6-Ton Bottle Jack Adjustable Extension; 8.50 to 12-Inch

The 8.5-inch to 12-inch Adjustable Bottle Jack Extension adds as much height as you need to your bottle jack. With the secure steel pin, the Extension can be adjusted on the fly to adapt to just about any recovery situation. It's like adding two layers of 4X and one layer of 2X lumber under your jack, only it's much safer and more stable! Multiple Extensions can be stacked to increase the height of the hydraulic cylinder (ram.) All of our made-in-the-USA Extensions and Lift Pads feature a solid steel shaft.
Safe Jack utilizes the Extension Screw Collar to create a secure engagement for the Extensions and Lift Pads, as well as to maximize the available stroke to an additional 1.5 inches. These premade Extension Screw Collars are measured specifically for the bottle jack brands we carry. If you have your own bottle jack you wish to use instead, you may need to purchase a Custom Extension Screw Collar. If you opt out of purchasing a Custom Extension Screw Collar altogether, the adapters may still work, but you will not achieve the additional 1.5 inches of stroke. The 6-ton adapters will fit over a bottle jack saddle diameter of 1.25 inches (31.75 mm) or less. If the hydraulic cylinder (ram) is significantly smaller than 1.25 inches, we advise against using the adapters without an Extension Screw Collar, as the point of engagement will be unstable.
6-ton accessories not for use on Toyota OEM or telescoping jacks.

FEATURES
Fits over bottle jacks with a saddle diameter of 1.25 inches (31.75 mm) or less
2 inches of internal engagement
Steel construction
Durable powder coat finish
Compatible with most bottle jacks
Numerous stacking combinations with other Safe Jack Extensions & Lift Pads
Compatible with Safe Jack 12 & 20-ton Bottle Jack Ram Adapters
Made in the USA

Overall length: 10.5” closed, 14” extendedWt. 4.2 lbs.

CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov