Talk to a Mustang Sales Tech
1-877-887-1105
M-F 8:30A-11P, Sat-Sun 8:30A-9P
$20K Sweeps! 10 Chances to Win! Enter Daily >

Best Sellers

How to Install BBK Rear Axle Bump Stop (79-04 All) on your Ford Mustang

Installation Time

15 minutes

American Muscle
Shop Parts in this Guide

STEP 1: Raise rear of vehicle up and support on sturdy jackstands.

STEP 2: Locate pinion snubber bracket mounted to vehicle floor just above the front of the rear axle at the center of the vehicle. Fig. 1

STEP 3: Using an 8mm socket, remove the three mounting bolts that mount it to the body.

STEP 4: Remove bracket and stock snubber.

STEP 5: Remove nut from snubber stud and remove snubber from bracket. Fig. 2

STEP 6: Install the GRIPP pinion snubber with provided nut into the bracket. Fig. 3

STEP 7: Reinstall bracket with new GRIPP snubber back in place. Fig. 4

STEP 8: Carefully lower vehicle back down.



Best Sellers