Guaranteed Free Delivery by 12/24! available on most items - Details

Talk to a Mustang Expert
1-877-887-1105
Every day 8:30AM EST - 11:00PM EST
Win $3,000 In Mods!! Enter Daily!

BMR Front Driveshaft Safety Loop - Hammertone (05-10 All)

Market Price $109.95 You Save 18% ($20.00)
Our Price

$89.95 (each)

FREE Shipping

  • Item 49603
  • MPN# DSL010H

Will this fit your Vehicle?

In Stock Ships same business day.
Ship to: Ashburn - 20149
Sorry, please enter a valid US or CA postal code
We're sorry, zip can't be updated at this time.
    Create a list
    Add to New List

    Saved - View your saved items

    We're sorry. We couldn't save this product at this time.

    Features & Details

    • Additional Safety - Front Driveshaft Safety Loop
    • NHRA Legal
    • Made from 1/4" Thick Steel Plate
    • Bolt-On Design
    • Black Hammer-Tone Powder Coat Finish
    • Fits All 2005-2010 Mustangs
    • Made in the USA
    Added Safety. This BMR Front Driveshaft Safety Loop is NHRA legal to safely contain your Mustang's driveshaft in place in the event of a U-joint or driveshaft failure that could other wise cause your pony to flip over. The NHRA requires the use of a driveshaft safety loop on vehicles running 12.99 or faster in the quarter mile.

    Quality Construction. Made in the USA from 1/4" x 2" steel plate for strength, this front Safety Loop is then completed with a long-lasting black hammer-tone powdercoat finish, and is designed to be an easy bolt-on using existing mounting holes, no welding or drilling is required.

    Application. The BMR Suspension Front Driveshaft Safety Loop is designed to fit all 2005 to 2010 Mustangs, including the V6, GT, Bullitt, and Shelby GT500 models.

    Technical Note. This Safety Loop may require modifications when used in conjunction with a Long Tube Header and Shorty X-pipe combination.

    Fitment: 2005 2006 2007 2008 2009 2010 Details

    CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

    What's in the Box
    • (1) Driveshaft Safety Loop
    • (1) Brace
    • (2) Bolts
    • (2) Washers
    • (2) Nuts
    Installation Info
    Will it fit my Mustang?

    You Might Also Like

    Customer Photos (1) Submit Your Photo

    View 1 Photo

    More Products You Might Like

    Questions & Answers (3)

    3 Top Rated Questions

    Would it fit if my car was lowered 2.5” with the 1 piece ford racing drive shaft

    • The BMR Front Driveshaft Safety Loop in Hammertone will fit  05-10 Mustangs when lowered. This Safety Loop may require modifications when used in conjunction with a Long Tube Header and Shorty X-pipe combination.

    Helpful (0)

    Will this fit a 2012 GT500?

    • The BMR Front Driveshaft Safety Loop-Hammertone will not fit a 2012 gt500.

    Helpful (0) Show 1 more answer

    Drive shaft size Will this accommodate a 4" drive shaft?

    • Yes it will. I just installed it with a 4" one piece aluminum drive shaft.

    Helpful (0)
    Post Your Question

    People Who Bought This Item Also Bought

    Customer Reviews (11) Write a Review

    Overall Rating 3.9

    out of 5 stars

    Installation Time:Afternoon

    Installation Cost:0-$100

    • Performance Gain 3.555556 3.6
    • Fit 3.9 3.9



    • 5/5

      Installation Time: Less than 1 Hour

      August 09, 2018

      BMR drive shaft loop

      Very nice product I purchased the hammer tone finish which looks great very thick durable finish Installed along with a Ford Racing driveshaft Install was easy Great piece of mind in the event of a front U joint failure

      JeffB

      Year: 2010 Submodel: GT

      Helpful (2)

    • 5/5

      Installation Time: Less than 1 Hour

      December 14, 2017

      Quality Product!!

      Install was not a hassle,anyone can do it. Bolts right up as advertised. I don't have a lot of HP in the car. I installed a one piece aluminum DS at same time.Just did the safety loop for piece of mind.

      TonyP

      Year: 2007 Submodel: GT500

      Helpful (2)

    • 5/5

      Installation Time: Less than 1 Hour

      October 05, 2017

      Fits perfect!

      This BMR drive-shaft loop fits perfectly with my long tube headers and X-pipe. I had to go with this one, as the Moroso drive-shaft loop did not have the clearance needed for the long tube headers and X-pipe.

      JasonS

      Year: 2008 Submodel: GT

      Helpful (3)

    • 1/5

      September 12, 2017

      Hard to fit

      Bad product too much modification to make fit. Ended up giving it to my mechanic for his troubles. I'm not racing my car so I don't need it.

      KeithC

      Year: 2007 Submodel: V6

      Helpful (3)

    • 5/5

      Installation Time: Less than 1 Hour

      August 23, 2017

      BMR quality

      Built well, fits great, had to bend a little because I am lowered 1.5" .

      MarcT

      Year: 2006 Submodel: GT

      Helpful (3)

    • 1/5

      July 19, 2016

      Not the best option

      I bought this safety loop along with a aluminum one piece 3.5" diameter driveshaft. My car has stock exhaust and headers, however, it is about 1.25" lowered. When I installed it it looked perfect, I centered the piece with the driveshaft and apparently it was a perfect fit. What I did not take in count is that when I lowered the lift the differential goes up along with the driveshaft which means that it is not centered to the safety loop anymore. In the middle of the highway it hit the driveshaft and sounded like the driveshaft had broken the 4 bots and unattached from the transmission, the traffic was heavy and could not change lanes so I got stuck in the middle of the highway with heavy traffic and 3 passengers. Do not buy this product because there is no way to adjust it up and down just to the sides. And since american muscle just gives you 30 warranty without the part being installed I cannot return it and have to find a way to bend the safety loop up for it to fit

      Felixpiloto

      Year: 2006 Submodel: GT

      Helpful (5)

    • 5/5

      Installation Time: Afternoon

      April 06, 2014

      Great product, easy install

      Took me just under two hours to install in my garage with car on jack stands. Very straight forward and easy with simple hand tools. I already had a one piece drive shaft and it fit well with plenty of clearance. A must have if you drag race.

      RRR92

      Year: 2010 Submodel: GT500 British Columbia, Canada

      Helpful (2)

    • 4/5

      Installation Time: Shop Install

      Installation Cost: 0-$100

      May 16, 2013

      Driveshaft Loop

      Fits with Kooks long tube headers, Competition Engineering loop didn't. No issues with install.

      Tom2891

      Year: 2010 Submodel: GT New Jersey, USA

      Helpful (5)

    • 3/5

      Installation Time: Shop Install

      Installation Cost: 0-$100

      March 22, 2013

      This product is well constructed.

      The BMR driveshaft safety loop is a very well constructed safety product and I am sure it was designed to be installed on a stock Mustang GT. This product was purchased to be installed on a 2007 Mustang GT equipped with Kooks 1-3/4" long tube headers and 3" off road X-Pipe. I had the safety loop installed at the same time as the aluminum driveshaft to reduce installation cost. Due to the 3" X-Pipe being larger in diameter than the stock 2-1/2" X-Pipe, the safety loop tube length had to be shortened by 1" to prevent the X-Pipe and safety loop tube from rubbing up against each other. I believe I read this same issue in another review, but I liked the design of the product and accepted the fact that if it didn't fit I could have it modified, that is what hot rodding is all about.

      TBT56

      Year: 2007 Submodel: GT Coconut Creek, FL, USA

      Helpful (3)

    • 4/5

      Installation Time: Less than 1 Hour

      January 15, 2013

      Peace of Mind

      Installed this safety loop after a clutch installation while the driveshaft was removed. Not tricks to installation so the directions that come with the part suffice. The product seems stout and the driveshaft ends up being well centered in the loop after installation so fitment is very good. Nothing to report during normal operation of the vehicle on the street. This product isn't really designed for performance gain so I put average.

      OheightMustang

      Year: 2008 Submodel: GT

      Helpful (3)

    • 5/5

      Installation Time: Less than 1 Hour

      April 07, 2012

      Well built

      The product has solid built design. Everything lined up perfect for a very easy install. Great value and gives piece of mind with high HP vehicles.

      07Racer

      Year: 2007 Submodel: GT Cali

      Helpful (4)

    Related Mustang Categories