Talk to a Mustang Sales Tech
1-877-887-1105
M-F 8:30A-11P, Sat-Sun 8:30A-9P
$20K Sweeps! 10 Chances to Win! Enter Daily >

Best Sellers

How to Install Centerforce Billet Steel Flywheel - 8 Bolt on your Mustang

Pre-Installation Checklist

  • Did you determine the cause of the original clutch failure.

          If not it may cause your new clutch to fail also.

  • Do you have an installation manual for your car for bolt torque specs and installation instructions?
  • Do you have a torque wrench to properly toque the flywheel and pressure plate bolts?
  • Do you have all of the fluids you will need?
  • Do you have the proper bolts for the flywheel and pressure plate?
  • Do you have an alignment tool to properly line up the disc to the transmission?
  • Do you have someone to resurface your flywheel?
  • Do you have a new throw-out bearing?
  • Do you have a replacement pilot bearing (preferred) or bushing?
  • Do you have something to secure the transmission during installation so that it does not ever rest on the disc during installation?

Installation Checklist

  • Have you inspected all clutch related parts (clutch fork, clevis, pins, hydraulics, etc.) for signs of wear or damage?
  • Does the spline on your transmission input shaft for damage or wear?
  • Does the new Disc slide smoothly and spin straight on the input shaft of the transmission?
  • Has you flywheel been resurfaced?
  • Are the dowel pins in the flywheel secure, straight and smooth?
  • Lubricate the input shaft spline with a dry graphite lubricant or a light coat of lithium (white) grease.
  • Did you check to make sure there is no grease or oil on any friction surfaces?

Post Installation Checklist

  • Is there a release adjustment to be adjusted (see owners manual)?
  • Did you complete your warranty card?

Best Sellers