How to Install Cervini's Black Upper Billet Grille (99-04 All) on your Ford Mustang

Notice: Prefit Before Painting. Install new, unpainted parts according to these instructions. Then remove parts, paint them and re-install.

Painted or Altered Parts are Non-Refundable

Installing the Billet Grille: Remove the factory grille from the bumper. Align the supplied template with the back edge of the grille opening and the factory grill holes as shown in fi g A. Drill a 3/32” hole in the in the bumper through the marked holes in the template. Set the grille in place and screw the bottom tabs to the bumper with the small black screws. Push the top of the grille towards the back of the bumper until the top tabs are an 1/8” away from the back edge of the bumper as shown in fi g B. Drill a 3/32” hole into the bumper through the pre drilled hole in the top tab and install the the long black screws.​